Santoku Knives

Filter by
Price
€ €
Manufacturers
Blade Length, mm
Country
Steel
Handle
Collection
Hardness
Filter
Santoku Japanese kitchen knife Kunio Masutani VG-1 Damascus Walnut M-2761 17cm
Sold out
Santoku Japanese kitchen knife Kunio Masutani VG-1 Damascus Walnut 17cm M-2761
Kunio Masutani Santoku knife with 17 cm blade. Santoku means “three virtues” or “three uses”: slicing, dicing, and mincing. You can cut fish, meat and vegetables with the Santoku. However, it is particularly suitable for vegetables due to the rather flat cutting edge profile.The very sharp, rustproof blades are ground on both sides and consist of a Damascus steel construction with a robust VG-1 core with a hardness of 60HRC. The octagon-shaped handle is made of walnut wood and is equipped with a clamp made of pakka wood. Not allowed to wash in dishwasher.
€120.97

Sold out

Santoku Japanese kitchen knife Miyabi 5000MCT MIZU 32917-181-0 18cm
Sold out
Santoku Japanese kitchen knife Miyabi 5000MCT MIZU 18cm 32917-181-0
Miyabi MIZU 5000MCT Santoku Japanese chef´s knife with its measuring 18 cm in length is idealy suitable for cutting and chopping  vegetables, herbs and also meat, fish and other products. This series 5000MCT has a core of MC 63, microcarbide powdereel (63 HRC) covered with 2 layers of ice- hardened Cryodur stainless steel. Cutting edge has an angle of 19°. Hammered finish (Tsuchime) which prevents food from sticking to the blade and ergonomic handle of micarta. It's recommended to hand wash only, maintain and sharpen on a whetstone and using glass, ceramic or stone cutting boards should be avoided. Made in Seki, Japan.
€225.00

Sold out

Santoku Japanese kitchen knife Kajibe KJB-001 16.5cm
Sold out
Santoku Japanese kitchen knife Kajibe 16.5cm KJB-001
Kajibe santoku knife with blade length 165 mm. Traditional Japanese chestnut handle. Blade of this Kajibe santoku knife is made of Aogami #2 iron clad steel. Kajibe knives are hand-forged by master blacksmith Kunio Ishikawa and his son. This santoku knife is not allowed to wash by dishwasher. Japanese kitchen knives have very hard, but thin blade. It is not allowed to cut by japanese chef knives bones and meat with bones, coconuts and other nuts, other hard products. 
€141.13

Sold out

Santoku Japanese kitchen knife Sukenari Aogami Super S-410 19cm
Sold out
Santoku Japanese kitchen knife Sukenari Aogami Super 19cm S-410
Sukenari santoku knife with blade length 190 mm. Traditional Japanese octagonal magnolia handle. Blade of this Sukenari knife is made of 3 Layered S/S Clad Aogami Super. This santoku knife is not allowed to wash by dishwasher. Japanese kitchen knives have very hard, but thin blade. It is not allowed to cut by japanese chef knives bones and meat with bones, coconuts and other nuts, other hard products. 
€254.03

Sold out

Santoku Japanese kitchen knife Yoshimi Kato Ginsan D-702CW 17cm
Sold out
Santoku Japanese kitchen knife Yoshimi Kato Ginsan 17cm D-702CW
Santoku knife with satin finished ginsan blade made by Yoshimi Kato. Yoshimi Kato uses Ginsan, or Silver-3, steel as the main element of this line of blades. G3 steel is well known for its excellent edge properties. Blade length 170 mm. Handle – cherrywood. For santoku Yoshimi Kato Ginsan recommended hand wash with warm water and towel dry. Avoid bones, frozen foods, nuts and hard candies or anything other than fruits, vegetables and proteins.
€197.58

Sold out

Santoku Japanese kitchen knife Mcusta Supreme Ripple Damascus TZ2-4003DR 18cm - 1
Sold out
Santoku Japanese kitchen knife Mcusta Zanmai Supreme Ripple Damascus 18cm TZ2-4003DR
Mcusta Zanmai Supreme Ripple Damascus Santoku with 18 cm blade. Weight is 169 g. Mcusta Supreme Ripple Damascus series feature 33 layers of Damascus-patterned blades with a core of high carbon VG-10 stainless steel, which provides excellent rust resistance and a long-lasting edge as well as its beautifulness.In addition, the unique Ripple pattern is originally created by the Zanmai technology, which you may never find it in the world.The design represents ocean and shore line. It's associated with a Japanese traditional picture in the Edo era.MyGoodKnife is an authorized dealer of Marusho Industry Inc (brand Mcusta Zanmai). All Mcusta knives and scissors at our stores are original and made is Seki city, Japan.Check our video to see interview with Mr.Tomohiro Hasegawa - president of Marusho Industry Inc (brand Mcusta Zanmai). Interview was made when Mr.Tomohiro visited or store in Helsinki.
€152.41

Sold out

Santoku Japanese kitchen knife Tojiro Shippu Black FD-1597 16.5cm
Sold out
Santoku Japanese kitchen knife Tojiro Shippu Black 16.5cm FD-1597
Tojiro Shippu Black DP Damascus Steel Santoku with 165mm blade. By forging steel of two different hardness over and over, elegant ripple pattern emerges and high uniformity of core steel VG10 eventually generate maximum sharpness. Black oxide processing, which is the technology often used for medical equipment, has been applied on blade. The blade thus has both outstanding corrosion resistance and beautiful visual aspect. Chestnut handle has excellent durability, and additionally applied fire treatment on surface makes it even stronger.
€154.84

Sold out

Santoku Japanese kitchen knife Ittetsu Shirogami IW1184 16.5cm
Sold out
Santoku Japanese kitchen knife Ittetsu Shirogami 16.5cm IW1184
Santoku knife Ittetsu with 165 mm blade. This santoku is made from 3 layers of material: iron clad and Shirogami steel. A layer of iron on each side protecting a layer of carbon steel at the core, in a process referred to as Sanmai or forge welding. Iron and carbon steel are both susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. The word santoku translates to three virtues which refers to slicing, dicing and chopping or meat, fish and vegetables depending on who you ask. Handle: waterproof mono octagonal walnut. Ittetsu knives are handmade in Echizen city, Japan. Do not attempt to cut, hit or chop frozen products or bones. The blade can chip or break. Hand wash with warm water and towel dry. 
€108.87

Sold out

Santoku Japanese kitchen knife Ittetsu Shirogami IW11833 18cm
Sold out
Santoku Japanese kitchen knife Ittetsu Shirogami 18cm IW11833
Santoku knife Ittetsu with 18 cm blade. The word santoku translates to three virtues which refers to slicing, dicing and chopping or meat, fish and vegetables depending on who you ask. Blade is made of Shirogami Iron Clad steel. Handle: waterproof mono octagonal walnut. Ittetsu knives are handmade in Echizen city, Japan. Do not attempt to cut, hit or chop frozen products or bones. The blade can chip or break. Hand wash with warm water and towel dry. 
€116.94

Sold out

Santoku Japanese kitchen knife Kenshiro Hatono Red lacquer HRS 16.5cm - 1
Sold out
Santoku Japanese kitchen knife Kenshiro Hatono Red lacquer 16.5cm HRS
Santoku knife handmade by Kenshiro Hatono. Blade 165 mm made od damascus steel with VG10 core. Traditional handle made of red lacquer. Kenshiro Hatono is a knife maker from Echizen city, Japan. Do not attempt to cut, hit or chop frozen products or bones. The blade can chip or break. Hand wash with warm water and towel dry.
€167.74

Sold out

Santoku Japanese kitchen knife Kenshiro Hatono Black lacquer HBS 16.5cm - 1
Sold out
Santoku Japanese kitchen knife Kenshiro Hatono Black lacquer 16.5cm HBS
Japanese santoku knife handmade by Kenshiro Hatono. Blade 165 mm made od damascus steel with VG10 core. Black lacquer handle. Kenshiro Hatono is a knife maker from Echizen city, Japan. Do not attempt to cut, hit or chop frozen products or bones. The blade can chip or break. Hand wash with warm water and towel dry.
€167.74

Sold out

Santoku Japanese kitchen knife Tojiro Shippu Special TSSS 16.5cm - 1
Sold out
Santoku Japanese kitchen knife Tojiro Shippu Special 16.5cm
New! Limited edition of Tojiro Shippu series. Santoku with 165 mm blade. Unlike usual Shippu series knives, this has 95 layered Damascus Steel blade with a VG-10 core. Oak wood handle. This Shippu Special Santoku has buffalo horn bolster.
€144.35

Sold out

Santoku Japanese kitchen knife Mcusta Revolution SPG2 ZRB-1203G 18cm - 1
Sold out
Santoku Japanese kitchen knife Mcusta Zanmai Revolution SPG2 18cm ZRB-1203G
The Mcusta Zanmai Revolution SPG2 Santoku is a fantastic japanese chef's knife with a very thin 3-layer steel blade and SPG2 core, a japanese powder steel known for excellent resistance to wear and corrosion. Hardness level is 61HRC with an amazingly lasting sharpness. The soft line between the side supporting steel and the core steel makes an incredibly beautiful blade with design reminding of japanese swords. Revolution has an ergonomic soft, bent handle compared to many other models from japanese Zanmai. The beautifully designed handle of black pakka wood lies perfectly in the hand and gives a firm and steady grip. Blade length: 18 cm. Full length: 34 cm. Weight: 166 gram.
€193.54

Sold out

Santoku Japanese kitchen knife Ryusen Hamono Bonten Unryu BU307 17.5cm - 1
Sold out
Santoku Japanese kitchen knife Ryusen Hamono Bonten Unryu 17.5cm BU307
The Bonten Unryu is one of the signature lines by Ryusen. It is considered as one of the best VG10 line by any Japanese maker, because of its unmatched artistics and more importantly, their VG10 blades are hande forged one-by-one. This Santoku Ryusen Hamono Bonten Unryu with japanese type handle.The Rockwell hardness on this knife is around 60-62 HRC, for a durable edge. Ryusen Hamono Santoku knife goes in black gift box.
€217.74

Sold out

Santoku Japanese kitchen knife Mcusta Forest HBG-6003M 18cm - 1
Sold out
Santoku Japanese kitchen knife Mcusta Zanmai Forest 18cm HBG-6003M
Japanese kitchen knife Mcusta Zanmai Forest Santoku with 180 mm blade. Mcusta Zanmai Forest Molybdenum Series is a great introduction to high quality Japanese knives. For this series, Zanmai forges each blade using Molybdenum Vanadium 8A steel and sharpens them utilizing Zanmai's famous Hamaguri V-Cut form. This grinding method results in incredibly sharp knives that are easy to use and maintain. The handle’s end caps are mirror finished and provide additional balance. The beautiful green micarta hangles are triple-riveted to complete this professional quality knife at an affordable price. MyGoodKnife is an authorized dealer of Marusho Industry Inc (brand Mcusta Zanmai). All Mcusta knives and scissors at our stores are original and made is Seki city, Japan. Check our video to see interview with Mr.Tomohiro Hasegawa - president of Marusho Industry Inc (brand Mcusta Zanmai). Interview was made when Mr.Tomohiro visited or store in Helsinki.
€92.74

Sold out

Santoku Japanese kitchen knife Mcusta Coreless Aranami ZUA-1003C 18cm - 1
Sold out
Santoku Japanese kitchen knife Mcusta Zanmai Coreless Aranami 18cm ZUA-1003C
Mcusta Zanmai  “coreless steel” series Santoku with 18 cm blade. VG-10 and VG-2 are laminated together like Damascus steel. Literally there is no core of the steel, that's why this Mcusta kitchen knife series called "coreless". Also the blade patterns are remarkably clearer than on Damascus steel. Mcusta use  “ocean wave” motif which came from a traditional Japanese painting. Handle of Mcusta Zanmai Coreless Aranami Santoku is made of red pakka wood with a bolster and bottom cap. Mosaic pin on handle and bottom cap. Each knife Mcusta Zanmai Ultimate Coreless Aranami goes in wooden box.
€293.89

Sold out

Santoku Japanese kitchen knife Mcusta Classic Damascus HKC-3003D 18cm - 1
Sold out
Santoku Japanese kitchen knife Mcusta Zanmai Classic Damascus 18cm HKC-3003D
Mcusta Zanmai Classic  Santoku. Santoku means 'Three Virtues' or 'To solve Three Problems'. The virtues or problems are slicing, dicing and mincing. The blade of Mcusta Zanmai Classic Santoku knife is coated with 33 layers of Damascus steel and has a VG-10 core. The handle is made from Corian, a composite material that consists of 2/3 natural minerals and 1/3 acrylic with pigment. Blade length: 18 cm
€133.06

Sold out

Santoku Japanese kitchen knife Tojiro DP Cobalt Alloy F-503 17cm
Sold out
Santoku Japanese kitchen knife TOJIRO DP Cobalt Alloy 17cm F-503
Tojiro Santoku 17 cm. This 3-layered series has been loved as standard articles for a long time. VG10 core. Reinforced laminated handle is very durable and tough, not easily deformed and strong against deterioration over time. Metal bolster is very hygienic and prevents stain and dirt from being accumulated between blade and handle. The edge made by skilled craftsmen provides you an amazing sharpness. Not dishwasher safe. We recommend only hand-washing. 
€97.21

Sold out

Santoku Japanese kitchen knife Tojiro SD Mol. Van. F-882 17cm - 1
Sold out
Santoku Japanese kitchen knife Tojiro SD Mol. Van. 17cm F-882
Tojiro SD Molybdenum Vanadium Steel Series. Sticking to sharpness, the edge satisfies even professionals. Tojiro has more than 5 manufacturing process for edging on this series and are willing to spend a lot of time. Usually, durability is required for business-use, however, “Tojiro” have been pursuing the sharpness and studying edging and structure of a blade for a long time. This is one of a reason that many professionals use “Tojiro” as their favorite knife all over the world.
€44.35

Sold out

Santoku Japanese kitchen knife Tojiro Teflon FA-87 16.5cm - 1
Sold out
Santoku Japanese kitchen knife Tojiro Teflon 16.5cm FA-87
Original teflon knife.
€16.12

Sold out