Santoku Knives

Filter by
Price
€ €
Manufacturers
Blade Length, mm
Country
Steel
Handle
Collection
Hardness
Filter
Santoku Japanese kitchen knife Miyabi 5000FCD 34684-181-0 18cm - 1
Sold out
Santoku Japanese kitchen knife Miyabi 5000FCD RAW 18cm 34684-181-0
MIYABI 5000 FCD Santoku, 18cm blade length. This Japanese santoku has a hard fine carbide steel core for very good cutting edge retention and sharpness. Santoku translates as "Three Virtues", these being meat, fish and vegetables. The flat cutting edge lends itself to a chopping motion rather than the rocking cutting movement of European chef's knives. The blade core is surrounded by 48 outer layers of steel which make up the unique Damascus-design pattern on the blade. The cutting edge is Honbazuke-honed and symmetrical (not single bevel), so can be used by those both right and left-handed. There is no finger guard so the whole length of the cutting edge can be used. The handle and half-bolster join seamlessly for comfortable use. The smooth surface helps to prevent the formation of calluses on the thumb and forefinger. Hand wash only for best care, and maintain and sharpen using a whetstone. We’d recommend using a wooden chopping board rather than glass, ceramic or stone boards as these will dull the cutting edge. - FC61 fine carbide steel blade core; - 48 layers of steel surrounding the core create the Damascus-design; - FRIODUR ice-hardened for extreme hardness; - Rockwell hardness of approximately 61; - Symmetrical cutting edge; - Pakka wood handle; - Steel mosaic pin and handle end cap; - Made in Japan.
€206.45

Sold out

Japanese kitchen knife Santoku Yu Kurosaki Fujin VG10 Damascus ZVD-165SAOWQ 16.5cm
Sold out
Santoku Japanese kitchen knife Yu Kurosaki Fujin VG10 Damascus 16.5cm ZVD-165SAOWQ
Santoku by Yu Kurosaki with Nickel Damascus-patterned blade. Blade has a core of VG-10 stainless steel. Hardness of 60-61 HRC provides excellent rust resistance and a long-lasting edge as well as its beautifulness. The blade surface has Damascus and unique hammered FUJIN texture which causes an image of a Japanese god believed to control the wind. The handle of santoku Fujin VG10 Damascus Series is made of oak and water-resistant wenge wood, which are separated from each other by a ring of natural turquoise. Yu Kurosaki works in Takefu Knife Village where he apprenticed with Hiroshi Kato.
€290.32

Sold out

Santoku Japanese kitchen knife Miyabi 8000DP Hibana Rocking 54488-181-0 18cm
Sold out
Santoku Japanese kitchen knife Miyabi 800DP Hibana Rocking 18cm 54488-181-0
The Miyabi 800DP Hibana Rocking 54488-181-0 supports Western circular motion and Asian chopping. The versatile blade is ideal for chopping vegetables, slicing through meats and preparing fish. Sleek black and brass spacers on the handle add to the beauty and weight that promotes sturdiness in hand and maneuverability at the tip. The MIYABI Hibana collection features a beautiful 49-layer Spark Damascus pattern on the blade that both strengthens and protects the core of FC61 steel. FRIODURx2 hardening improves the microstructure of the steel for improved cutting performance, corrosion resistance and durability. It's recommended to hand wash only, maintain and sharpen on a whetstone and using glass, ceramic or stone cutting boards should be avoided. Handcrafted in Seki, Japan.
€225.00

Sold out

Santoku Japanese kitchen knife Zwilling J.A.Henckels Twin Fin II 30917-181-0 18cm
Sold out
Santoku Japanese kitchen knife Zwilling J.A.Henckels Twin Fin II 18cm 30917-181-0
Comfortable santoku knife Zwilling J.A.Henckels Twin Fin II 30917-181-0 is suitable for cutting, chopping, dicing and mincing. With a FRIODUR ice-hardened blade made of Nitro 60 special formula stainless steel, these knives boast long-lasting durability. The curved bolster acts as an extension of the hand and the ergonomic steel handle with gilled design is hygienic and exceptionally well balanced, promoting fatigue-free cutting even for the largest chopping tasks. Ideal for preparing vegetables, meat and fish. Made in Seki, Japan. Dishwasher safe.
€87.90

Sold out

Santoku Japanese kitchen knife Zwilling J.A.Henckels Twin Fin II 30917-141-0 14cm
Sold out
Santoku Japanese kitchen knife Zwilling J.A.Henckels Twin Fin II 14cm 30917-141-0
Comfortable santoku knife Zwilling J.A.Henckels Twin Fin II 30917-141-0  suitable for cutting and chopping. Ideal for preparing vegetables, meat and fish. With a FRIODUR ice-hardened blade made of Nitro 60 special formula stainless steel, these knives boast long-lasting durability. The curved bolster acts as an extension of the hand and the ergonomic steel handle with gilled design is hygienic and exceptionally well balanced, promoting fatigue-free cutting even for the largest chopping tasks. Made in Seki, Japan. Dishwasher safe.
€68.51

Sold out

Santoku Japanese kitchen knife Daisuke Nishida Shirogami Bocote DN-11219BGA
Sold out
Santoku Japanese kitchen knife Daisuke Nishida Shirogami Bocote 16cm DN-11219BGA
Santoku knife handmade by Daisuke Nishida. 16 cm blade is made of Shirogami carbon steel with iron clad. Daisuke Nishida santoku has handle made of bocote wood. This  knife is not allowed to wash by dishwasher. Japanese kitchen knives have very hard, but thin blade. It is not allowed to cut by Japanese knives bones and meat with bones, coconuts and other nuts, other hard products. Daisuke Nishida knives due to hand-made may slightly differ from the pictures and dimensions shown. 
€129.03

Sold out

Chef knife Zwilling J.A.Henckels Bob Kramer Euro Stainless Damask 34897-181-0 18cm - 1
Sold out
Chef knife Zwilling J.A.Henckels Euro Stainless Damask Bob Kramer Santoku 18cm 34897-181-0
Zwilling Bob Kramer Santoku kitchen knife 18 cm from the series Euro Stainless Damask is ideal for recipes of Asian cuisine. Santoku is an all-rounder in the kitchen thanks to its polished finish on the cutting edge, which can be used particularly well for preparing meat, fish and vegetables. With the 18 cm long blade, you can easily process even larger vegetables such as pumpkins.The blade has beautiful unique Damask patterning and a hard core of SG2 powder steel enclosed within 100 layers of two different steels. CRYODUR® ice-hardened blades are particularly cut-resistant, corrosion-resistant and have the best blade flexibility.The non-slip handle with ergonomic shape for comfortable cutting is made of micarta (multilayer material made of linen and synthetic resin), with stainless steel rivets and decorative logo pin. The handl is particularly dimensionally stable and moisture-resistant.It's recommended to hand wash only, maintain and sharpen on a whetstone and using glass, ceramic or stone cutting boards should be avoided.Zwilling Bob Kramer Santoku kitchen knife is made in Japan.
€325.80

Sold out

Santoku Japanese kitchen knife Kunio Masutani VG-10 Damascus M-3246 14cm
Sold out
Santoku Japanese kitchen knife Kunio Masutani VG-10 Damascus 14cm M-3246
Kunio Masutani santoku knife M-3246 with 15 cm blade. The very sharp, rustproof blades are ground on both sides and consist of a Damascus steel construction with a robust VG-10 core. The black handle is made of pakkawood. Not allowed to wash in dishwasher.
€79.84

Sold out

Santoku Japanese kitchen knife Kunio Masutani VG-10 Damascus M-3221 17cm
Sold out
Santoku Japanese kitchen knife Kunio Masutani VG-10 Damascus 17cm M-3221
Kunio Masutani santoku knife with 17 cm blade. The very sharp, rustproof blades are ground on both sides and consist of a Damascus steel construction with a robust VG-10 core and kokuryu finish. The black handle is made of pakka wood. Not allowed to wash in dishwasher.
€88.71

Sold out

Santoku Japanese kitchen knife Yu Kurosaki Fujin VG10 Damascus Wenge ZVD-165SAW 16.5cm
Sold out
Santoku Japanese kitchen knife Yu Kurosaki Fujin VG10 Damascus Wenge 16.5cm ZVD-165SAW
Yu Kurosaki Santoku knife with wenge wood handle. Yu Kurosaki Fujin series fearture Nickel Damascus-patterned blades with a core of VG-10 stainless steel for professional with a hardness of 60-61 HRC, which provides excellent rust resistance and a long-lasting edge as well as its beautifulness. The blade surface has Damascus and unique hammered FUJIN texture which causes an image of a Japanese god believed to control the wind. The handle of Santoku Fujin VG10 Damascus Series is made of Octagonal-shaped wenge wood. Handmade by Mr. Yu Kurosaki. Yu Kurosaki works in Takefu Knife Village where he apprenticed with Hiroshi Kato.
€215.32

Sold out

Santoku Japanese kitchen knife Tojiro VG10 Hammered F-1112 17cm
Sold out
Santoku Japanese kitchen knife Tojiro VG10 Hammered 17cm F-1112
The Tojiro VG10 Hammered Santoku is a knife that plays outside of its price box in many ways. First up are the materials. VG10 is one of the best stainless steels used in the making of Japanese knives. It is highly regarded for it good edge retention, toughness, and superior stain resistance. It also gets really sharp. Blade lenght of Tojiro VG10 Hammered Santoku knife is 17 cm. This is a well-proportioned santoku and a knife that will find favor in many home kitchens or with professionals who prefer a smaller chef style knife for close quarters or detail work. Weight is 215 g.VG10 Hammered is a new line of Tojiro knives.
€100.81

Sold out

Santoku Japanese kitchen knife Kenshiro Hatono VG10 Damascus, Japanese lacquer KH-A 17cm
Sold out
Santoku Japanese kitchen knife Kenshiro Hatono VG10 Damascus, Japanese lacquer 17cm KH-A
Japanese santoku knife handmade by Kenshiro Hatono. Blade 170 mm made of damascus steel with VG10 core. Japanese lacquer handle. Kenshiro Hatono is a talanted knife maker. Currently he is working in Takefu knife village. This Japanese handmade knife is not allowed to cut, hit or chop frozen products or bones. The blade can chip or break. Hand wash with warm water and towel dry.
€152.42

Sold out

Santoku Japanese kitchen knife Yu Kurosaki Fujin R2 ZRF-165SA 16.5cm
Sold out
Santoku Japanese kitchen knife Yu Kurosaki Fujin R2 16.5cm ZRF-165SA
Fujin R2 Santoku is an excellent aesthetically and functionally, a versatile Japanese santoku knife handcrafted by master Yu Kurosaki. The octagon handle is made of water-resistant wenge wood and turquoise mineral, which are separated from each other by a silver ring. The 16.5 cm long blade has a unique hammered Tsuchime pattern on it and made of three-layer R2 steel. While making this series, Kurosaki was inspired by Fujin, the Shinto god of the wind, which can be seen in the forged pattern.
€334.68

Sold out

Santoku Japanese kitchen knife Yu Kurosaki SPG2 Damascus Turquoise ZTQ-165SA 16.5cm
Sold out
Santoku Japanese kitchen knife Yu Kurosaki SPG2 Damascus Turquoise 16.5cm ZTQ-165SA
Amazing Yu Kurosaki Fujin SPG2 Hammered Damascus Turquoise Kiritsuke Santoku knife, 16,5 cm. Crafted with a beautiful full tang design using SPG2 core steel and finished with a sensational Western shaped turquoise handle, this is a real collectors knife and very difficult to find due to the limited numbers made. Weight of Yu Kurosaki SPG2 Damascus Turquoise ZTQ-165SA is about 230 g. Handmade by Mr. Yu Kurosaki. Yu Kurosaki works in Takefu Knife Village where he apprenticed with Hiroshi Kato.
€491.94

Sold out

Santoku Japanese kitchen knife Mcusta Classic Pro Zebra HFZ-8003D 18cm - 1
Sold out
Santoku Japanese kitchen knife Mcusta Zanmai Classic Pro Zebra 18cm HFZ-8003D
Mcusta Zanmai Classic Pro Zebra Santoku knife. Blade lenght is 18 cm. Santoku means 'Three Virtues' or 'To solve Three Problems'. The virtues or problems are slicing, dicing and mincing. The blade of Mcusta Zanmai Classic Pro Zebra santoku knife is made of of Damascus steel (VG-10), 33 layers. The handle is made of pakka wood with mosaic pin. MyGoodKnife is an authorized dealer of Marusho Industry Inc (brand Mcusta Zanmai). All Mcusta knives at our stores are original and made is Seki city, Japan. Check our video to see interview with Mr.Tomohiro Hasegawa - president of Marusho Industry Inc (brand Mcusta Zanmai). Interview was made when Mr.Tomohiro visited or store in Helsinki.
€170.97

Sold out

Santoku Japanese kitchen knife Mcusta Revolution ZRB-1215G 15cm - 1
Sold out
Santoku Japanese kitchen knife Mcusta Zanmai Revolution 15cm ZRB-1215G
Mcusta Zanmai Revolution Kosantoku is fantastic small japanese chef's knife with a very thin 3-layer steel blade and SPG2 core, a japanese powder steel known for excellent resistance to wear and corrosion. The 62° Rockwell blade displays hardness, toughness, and flexibility for ultimate sharpness and long lasting edge retention.The beautifully designed handle of black pakka wood lies perfectly in the hand and gives a firm and steady grip. The handle of Mcusta Zanmai Revolution Kosantoku is accented with traditional Japanese decorative pin. Blade length: 15 cm. Full length: 30 cm. Weight: 146 gram. Handcrafted in Seki city, Japan.
€169.35

Sold out

Santoku Japanese kitchen knife Gihei Hamono Aogami 2 Iron clad GH-502 16.5cm
Sold out
Santoku Japanese kitchen knife Gihei Hamono Aogami 2 Iron clad 16.5cm GH-502
Japanese kitchen knife santoku by Gihei Hamono. Blade is made of Aogami 2 steel with iron clad. Aogami #2 by Hitachi sometimes called Blue Paper #2 since the steel is wrapped in blue paper. It has a very good edge sharpness and excellent edge retention. This Gihei Hamono santoku has a handle of baked magnolia. Never wash any Japanese knife in a dishwasher. This knife has a thin blade and should not be used on hard items such as bones or frozen foods.
€120.97

Sold out

Santoku Japanese kitchen knife Gihei Hamono SLD GH-302 16.5cm
Sold out
Santoku Japanese kitchen knife Gihei Hamono SLD 16.5cm GH-302
Japanese kitchen knife santoku by Gihei Hamono. The Santoku is the Japanese version of the chef's knife. Blade is made of SLD steel.  SLD stainless steel was originally designed by Hitachi for cutting other steels. It holds an edge as long as a carbon steel, but is much easier to care for. The base of the steel is SKD11 with hardness up to 61-63HRC. This Gihei Hamono santoku has a handle of magnolia. Never wash any Japanese knife in a dishwasher. This knife has a thin blade and should not be used on hard items such as bones or frozen foods.
€128.23

Sold out

Santoku Japanese kitchen knife Kunio Masutani VG-10 Damascus Pakka M-3241 17cm
Sold out
Santoku Japanese kitchen knife Kunio Masutani VG-10 Damascus Pakka 17cm M-3241
Kunio Masutani Santoku knife with 17 cm blade. Santoku means “three virtues” or “three uses”: slicing, dicing, and mincing. You can cut fish, meat and vegetables with the Santoku. However, it is particularly suitable for vegetables due to the rather flat cutting edge profile. The very sharp, rustproof blades are ground on both sides and consist of a Damascus steel construction with a robust VG-10 core with a hardness of 61-63HRC. The black handle is made of pakka wood. Not allowed to wash in dishwasher.
€87.90

Sold out

Santoku Japanese kitchen knife Kunio Masutani VG-1 Damascus Walnut M-2761 17cm
Sold out
Santoku Japanese kitchen knife Kunio Masutani VG-1 Damascus Walnut 17cm M-2761
Kunio Masutani Santoku knife with 17 cm blade. Santoku means “three virtues” or “three uses”: slicing, dicing, and mincing. You can cut fish, meat and vegetables with the Santoku. However, it is particularly suitable for vegetables due to the rather flat cutting edge profile.The very sharp, rustproof blades are ground on both sides and consist of a Damascus steel construction with a robust VG-1 core with a hardness of 60HRC. The octagon-shaped handle is made of walnut wood and is equipped with a clamp made of pakka wood. Not allowed to wash in dishwasher.
€120.97

Sold out

Santoku Japanese kitchen knife Ittetsu Black Pakka wood IWY-9002 17cm
Sold out
Santoku Japanese kitchen knife Ittetsu Black Pakka wood 17cm IWY-9002
Stylish Santoku kitchen knife Ittetsu with 17 cm blade. The word santoku translates to three virtues which refers to slicing, dicing and chopping or meat, fish and vegetables depending on who you ask. Blade is made of stainless Sandvik 19C27 steel. Handle is black pakka wood. Ittetsu knives are handmade in Echizen city, Japan. Do not attempt to cut, hit or chop frozen products or bones. The blade can chip or break. Hand wash with warm water and towel dry. 
€72.58

Sold out

Santoku Japanese kitchen knife Teruyasu Fujiwara TF2317 17cm
Sold out
Santoku Japanese kitchen knife Teruyasu Fujiwara 17cm TF2317
Japanese santoku knife  with 170 mm blade. Handmade by mr. Teruyasu Fujiwara. Blade is made of Shirogami 1 steel with stainless steel clad. Handle: pakka wood. Hand wash with warm water and towel dry. 
€317.93

Sold out

Santoku Japanese kitchen knife Miyabi 5000MCT MIZU 32917-181-0 18cm
Sold out
Santoku Japanese kitchen knife Miyabi 5000MCT MIZU 18cm 32917-181-0
Miyabi MIZU 5000MCT Santoku Japanese chef´s knife with its measuring 18 cm in length is idealy suitable for cutting and chopping  vegetables, herbs and also meat, fish and other products. This series 5000MCT has a core of MC 63, microcarbide powdereel (63 HRC) covered with 2 layers of ice- hardened Cryodur stainless steel. Cutting edge has an angle of 19°. Hammered finish (Tsuchime) which prevents food from sticking to the blade and ergonomic handle of micarta. It's recommended to hand wash only, maintain and sharpen on a whetstone and using glass, ceramic or stone cutting boards should be avoided. Made in Seki, Japan.
€225.00

Sold out

Santoku Japanese kitchen knife Kajibe KJB-001 16.5cm
Sold out
Santoku Japanese kitchen knife Kajibe 16.5cm KJB-001
Kajibe santoku knife with blade length 165 mm. Traditional Japanese chestnut handle. Blade of this Kajibe santoku knife is made of Aogami #2 iron clad steel. Kajibe knives are hand-forged by master blacksmith Kunio Ishikawa and his son. This santoku knife is not allowed to wash by dishwasher. Japanese kitchen knives have very hard, but thin blade. It is not allowed to cut by japanese chef knives bones and meat with bones, coconuts and other nuts, other hard products. 
€141.13

Sold out