Filtrar por
Precio
€ €
Marcas
Longitud de la hoja
Size
Sex
Pais
Acero
Mango
Colección
Dureza
Vaina
Bloqueo
Materiales
Filter
Cuchillo Japones Yoshimi Kato Petty D-500 12cm
Agotado
Cuchillo de cocina Yoshimi Kato Petty 12cm D-500
Japanese utility Petty knife hand forged by Yoshimi Kato who is a certified traditional craftsman in Takefu, Fukui prefecture in Japan. Blade - Aogami carbon steel with stainless steel clad. Blade length 120 mm. Handle – cherrywood. Hand wash with warm water and towel dry.
152,42 €

Agotado

Cuchillo Japones Sujihiki Ittetsu Shirogami IW11813 27cm
Agotado
Cuchillo de cocina Sujihiki Ittetsu Shirogami 27cm IW11813
Sujihiki Ittetsu with 270 mm blade is a double edge slicing knife with a long narrow blade that smoothly slices through meat or vegetables and preserves the integrity of each ingredient's freshness. This Ittetsu sujihiki is made from 3 layers of material: iron clad and Shirogami steel. A layer of iron on each side protecting a layer of carbon steel at the core, in a process referred to as Sanmai or forge welding. Iron and carbon steel are both susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Handle: waterproof mono octagonal walnut. Ittetsu knives are handmade in Echizen city, Japan. Hand wash with warm water and towel dry.
208,87 €

Agotado

Cuchillo Japones Nakiri Ittetsu Shirogami IW1185 16.5cm
Agotado
Cuchillo de cocina Nakiri Ittetsu Shirogami 16.5cm IW1185
Japanese Nakiri vegetable knife Ittetsu with 165 mm blade. This nakiri is made from 3 layers of material: iron clad and Shirogami steel. A layer of iron on each side protecting a layer of carbon steel at the core, in a process referred to as Sanmai or forge welding. Iron and carbon steel are both susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Avoid Bones, Frozen foods, nuts and hard candies or anything other than fruits, vegetables and proteins. Handle: waterproof mono octagonal walnut. Ittetsu knives are handmade in Echizen city, Japan. Hand wash with warm water and towel dry.
116,94 €

Agotado

Cuchillo Japones Santoku Ittetsu Shirogami IW1184 16.5cm
Agotado
Cuchillo de cocina Santoku Ittetsu Shirogami 16.5cm IW1184
Santoku knife Ittetsu with 165 mm blade. This santoku is made from 3 layers of material: iron clad and Shirogami steel. A layer of iron on each side protecting a layer of carbon steel at the core, in a process referred to as Sanmai or forge welding. Iron and carbon steel are both susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. The word santoku translates to three virtues which refers to slicing, dicing and chopping or meat, fish and vegetables depending on who you ask. Handle: waterproof mono octagonal walnut. Ittetsu knives are handmade in Echizen city, Japan. Do not attempt to cut, hit or chop frozen products or bones. The blade can chip or break. Hand wash with warm water and towel dry. 
108,87 €

Agotado

Cuchillo Japones Santoku Ittetsu Shirogami IW11833 18cm
Agotado
Cuchillo de cocina Santoku Ittetsu Shirogami 18cm IW11833
Santoku knife Ittetsu with 18 cm blade. The word santoku translates to three virtues which refers to slicing, dicing and chopping or meat, fish and vegetables depending on who you ask. Blade is made of Shirogami Iron Clad steel. Handle: waterproof mono octagonal walnut. Ittetsu knives are handmade in Echizen city, Japan. Do not attempt to cut, hit or chop frozen products or bones. The blade can chip or break. Hand wash with warm water and towel dry. 
116,94 €

Agotado

Cuchillo Japones Ittetsu Petty IW1183 15cm - 1
Agotado
Cuchillo de cocina Ittetsu Petty 15cm IW-1183
For the sake of viewer convenience, the content is shown below in one of the available alternative languages.
Japanese Petty knife Ittetsu with 150 mm blade. Blade is made of Shirogami Iron Clad steel. Handle: waterproof mono octagonal walnut. Ittetsu knives are handmade in Echizen city, Japan. Do not attempt to cut, hit or chop frozen products or bones. The blade can chip or break. Hand wash with warm water and towel dry.
108,87 €

Agotado

Cuchillo Japones Kiritsuke Hideo Kitaoka 11 Layered Shirogami CN3217 27cm
Agotado
Cuchillo de cocina Kiritsuke Hideo Kitaoka 11 Layered Shirogami 27cm CN3217
Handmade kiritsuke knife by Mr. Hideo Kitaoka. Shirogami steel, 11 layers. Handle made from Japanese magnolia wood, which has good water resistance and smooth surface. Please, use your carbon knives carefully. It is not recommended for such knives - to wash in dishwasher, to leave it in water, to clean by acid liquids, to cut acid fruits like lemon. Hand-dry your knife: This should be done immediately after washing with a clean dishtowel. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry.
225,81 €

Agotado

Cuchillo Japones Yoshimi Kato Satin finished Ginsan Petty 15 cm D-701CW 15cm
Agotado
Cuchillo de cocina Yoshimi Kato Satin finished Ginsan Petty 15 cm 15cm D-701CW
Navaja japonesa forjada a mano por Yoshimi Kato, artesano tradicional certificado en Takefu, prefectura de Fukui, Japón. Hoja Ginsan acero. Longitud de la hoja 150 mm. Mango-cerezo. Lavar a mano con agua tibia y secar con una toalla.
175,00 €

Agotado

Cuchillo Japones Kiritsuke Mcusta Revolution ZRB-1206G 23cm - 1
Agotado
Cuchillo de cocina Kiritsuke Mcusta Zanmai Revolution 23cm ZRB-1206G
For the sake of viewer convenience, the content is shown below in one of the available alternative languages.
The Mcusta Zanmai Revolution SG2 Kiritsuke Knife is designed for all the tasks for which you'd use a chef's knife. It works extremely well with vegetables, julienne, dice, and more. Can also be used for cleaning and portioning boneless proteins, particularly fish, and slices cooked proteins with grace and ease. The straight edge won't rock through cuts such as a traditional chef's knife. Mcusta Zanmai Revolution SG2 features a SG2 powder steel blade. The 62° Rockwell blade displays hardness, toughness, and flexibility for ultimate sharpness and long lasting edge retention.  The pakkawood handle is accented with a traditional Japanese decorative pin. Handcrafted in Seki city, Japan.
241,93 €

Agotado

Cuchillo Japones Gyuto Mcusta Revolution chef ZRB-1205G 21cm - 1
Agotado
Cuchillo de cocina Gyuto Mcusta Zanmai Revolution chef 21cm ZRB-1205G
For the sake of viewer convenience, the content is shown below in one of the available alternative languages.
The Mcusta Zanmai Revolution SPG2 Gyoto is fantastic chef's knife with a very thin 3-layer steel blade and SPG2 core, a japanese powder steel known for excellent resistance to wear and corrosion. Mcusta Zanmai Revolution SG2 features a SG2 powder steel blade. The 62° Rockwell blade displays hardness, toughness, and flexibility for ultimate sharpness and long lasting edge retention.  The pakkawood handle is accented with a traditional Japanese decorative pin. Handcrafted in Seki city, Japan.
217,74 €

Agotado

Cuchillos para verduras Mcusta Coreless Aranami ZUA-1001C 11cm - 1
Agotado
Cuchillo de cocina Mcusta Zanmai Coreless Aranami 11cm ZUA-1001C
For the sake of viewer convenience, the content is shown below in one of the available alternative languages.
Mcusta Zanmai  “coreless steel” series Petty knife with 11 cm blade . VG-10 and VG-2 are laminated together like Damascus steel. Literally there is no core of the steel, that's why this Mcusta kitchen knife series called "coreless". Also the blade patterns are remarkably clearer than on Damascus steel. Mcusta use  “ocean wave” motif which came from a traditional Japanese painting. Handle of Mcusta Zanmai Coreless Aranami Petty knife is made of red pakka wood with a bolster and bottom cap. Mosaic pin on handle and bottom cap. Each knife Mcusta Zanmai Ultimate Coreless Aranami goes in wooden box.
201,61 €

Agotado

Cuchillo Japones Gyuto Miyabi chef 34373-241-0 24cm - 1
Agotado
Cuchillo de cocina Gyuto Miyabi 5000MCD chef 24cm 34373-241-0
El cuchillo de chef Zwilling Miyabi 5000MCD Gyutoh 34373-241-0 de 24 cm es perfecto para cortar o rebanar carne o pescado. Su hoja delgada pero estable ofrece un corte perfectamente controlado y limpio. Tiene un perfil japonés auténtico con un afilado Honbazuke extremadamente afilado y está pulido simétricamente en un ángulo de 19 grados. Primero, la hoja se afila dos veces en piedras giratorias y luego se pule en una rueda de cuero.
El mango del gyutoh está hecho de abedul Masur para darle a cada cuchillo un patrón único de vetas de madera. Una tapa de extremo y un alfiler de mosaico de estilo sutil completan el aspecto elegante del cuchillo. El mango tiene forma de D para darle al cuchillo un equilibrio y control perfectos para un corte preciso y sin esfuerzo. La hoja tiene un hermoso patrón de damasco y un núcleo duro de acero en polvo MicroCarbide MC63 encerrado dentro de 100 capas de dos aceros diferentes. La hoja CRYODUR® está endurecida con hielo a -196 grados centígrados para lograr un grado de dureza de alrededor de 63 Rockwell que mantiene la hoja afilada y flexible. Se recomienda lavar a mano únicamente, mantener y afilar en una piedra de afilar y se debe evitar el uso de tablas de cortar de vidrio, cerámica o piedra.
Cuchillo de chef Zwilling Miyabi 5000MCD Gyutoh fabricado en Japón. Solo hay mejores cuchillos de cocina en la gama de MyGoodKnife.
370,16 €

Agotado

Cuchillo Japones Santoku Kenshiro Hatono Red lacquer HRS 16.5cm - 1
Agotado
Cuchillo de cocina Santoku Kenshiro Hatono Red lacquer 16.5cm HRS
For the sake of viewer convenience, the content is shown below in one of the available alternative languages.Santoku knife handmade by Kenshiro Hatono. Blade 165 mm made od damascus steel with VG10 core. Traditional handle made of red lacquer. Kenshiro Hatono is a knife maker from Echizen city, Japan. Do not attempt to cut, hit or chop frozen products or bones. The blade can chip or break. Hand wash with warm water and towel dry.
167,74 €

Agotado

Cuchillo Japones Santoku Kenshiro Hatono Black lacquer HBS 16.5cm - 1
Agotado
Cuchillo de cocina Santoku Kenshiro Hatono Black lacquer 16.5cm HBS
For the sake of viewer convenience, the content is shown below in one of the available alternative languages.
Japanese santoku knife handmade by Kenshiro Hatono. Blade 165 mm made od damascus steel with VG10 core. Black lacquer handle. Kenshiro Hatono is a knife maker from Echizen city, Japan. Do not attempt to cut, hit or chop frozen products or bones. The blade can chip or break. Hand wash with warm water and towel dry.
167,74 €

Agotado

Cuchillo Japones Gyuto Tojiro Atelier TA-CH210 21cm - 1
Agotado
Cuchillo de cocina Gyuto TOJIRO Atelier 21cm TA-CH210
El Cuchillo Japones Gyuto Atelier TA-CH210 forjado artesanalmente por TOJIRO KNIFE. Cortar y triturar varios tipos de productos con su ayuda convierte el trabajo duro en un verdadero placer. El Cuchillo del Chef es el verdadero Rey de los cuchillos, tanto en las cocinas de aficionados como en las profesionales. 
La conveniencia del corte se logra mediante el afilado de alta calidad de la capa central de una cuchilla  endurecida a 61 HRC del acero VG10/Damaskos. La cuchilla puede mantener el afilado el tiempo suficiente incluso con el trabajo más intenso y solo requiere una edición poco frecuente con musat. 
El diseño ergonómico del cuchillo se realiza teniendo en cuenta los más altos estándares profesionales. No cortar alimentos congelados o huesos. Lava tu cuchillo con agua templada y una esponja suave. Si es necesario utiliza detergente neutro. Seca completamente el cuchillo con un paño suave. Nunca lo laves en el lavavajillas. Mantén afilado tu cuchillo utilizando piedras de afilar de alta calidad y con el grit adecuado.
354,84 €

Agotado

Cuchillo Japones Nakiri Tojiro Atelier TA-VE165 16.5cm - 1
Agotado
Cuchillo de cocina Nakiri Tojiro Atelier 16.5cm TA-VE165
El Cuchillo Japones Nakiri Tojiro Atelier TA-VE165 forjado artesanalmente por TOJIRO KNIFE. El tradicional cuchillo para verduras Nakiri está diseñado para triturar todo tipo de verduras y frutas a partir de las cuales puedes crear tus obras maestras culinarias. El diseño del cuchillo es simple, con una hoja recta y un mango ergonómico: la combinación perfecta para un trabajo conveniente en la cocina. La conveniencia del corte se logra mediante el afilado de alta calidad de la capa central de una cuchilla  endurecida a 61 HRC del acero VG10/Damaskos. La cuchilla puede mantener el afilado el tiempo suficiente incluso con el trabajo más intenso y solo requiere una edición poco frecuente con musat. El diseño ergonómico del cuchillo se realiza teniendo en cuenta los más altos estándares profesionales. No cortar alimentos congelados o huesos.Lava tu cuchillo con agua templada y una esponja suave. Si es necesario utiliza detergente neutro. Seca completamente el cuchillo con un paño suave. Nunca lo laves en el lavavajillas. Mantén afilado tu cuchillo utilizando piedras de afilar de alta calidad y con el grit adecuado.
316,13 €

Agotado

Cuchillo Japones Santoku Tojiro Shippu Special TSSS 16.5cm - 1
Agotado
Cuchillo de cocina Santoku Tojiro Shippu Special 16.5cm
For the sake of viewer convenience, the content is shown below in one of the available alternative languages.
New! Limited edition of Tojiro Shippu series. Santoku with 165 mm blade. Unlike usual Shippu series knives, this has 95 layered Damascus Steel blade with a VG-10 core. Oak wood handle. This Shippu Special Santoku has buffalo horn bolster.
144,35 €

Agotado

Cuchillo Japones Gyuto Mcusta Classic Pro Zebra HFZ-8005D 21cm - 1
Agotado
Cuchillo de cocina Gyuto Mcusta Zanmai Classic Pro Zebra 21cm HFZ-8005D
For the sake of viewer convenience, the content is shown below in one of the available alternative languages.
Mcusta Zanmai Classic Pro Zebra Gyuto knife. Blade lenght is 21 cm. Gyuto is a chef knife. The blade of Mcusta Zanmai Classic Pro Zebra gyuto knife is made of of Damascus steel (VG-10), 33 layers. The handle is pakka wood with mosaic pin. MyGoodKnife is an authorized dealer of Marusho Industry Inc (brand Mcusta Zanmai). All Mcusta knives at our stores are original and made is Seki city, Japan.Check our video to see interview with Mr.Tomohiro Hasegawa - president of Marusho Industry Inc (brand Mcusta Zanmai). Interview was made when Mr.Tomohiro visited or store in Helsinki.
193,55 €

Agotado

Cuchillo Japones Mcusta Classic Pro Zebra Petty HFZ-8000D 9cm - 1
Agotado
Cuchillo de cocina Mcusta Zanmai Classic Pro Zebra Petty 9cm HFZ-8000D
For the sake of viewer convenience, the content is shown below in one of the available alternative languages.
Mcusta Zanmai Classic Pro Zebra paring knife. Blade lenght is 9 cm. The blade of Mcusta Zanmai Classic Pro Zebra Paring knife is made of of Damascus steel (VG-10), 33 layers. The handle is made of pakka wood with mosaic pin. MyGoodKnife is an authorized dealer of Marusho Industry Inc (brand Mcusta Zanmai). All Mcusta knives at our stores are original and made is Seki city, Japan.Check our video to see interview with Mr.Tomohiro Hasegawa - president of Marusho Industry Inc (brand Mcusta Zanmai). Interview was made when Mr.Tomohiro visited or store in Helsinki.
120,16 €

Agotado

Cuchillo Japones Mcusta Classic Damascus Petty HKC-3002D 15cm - 1
Agotado
Cuchillo de cocina Mcusta Zanmai Classic Damascus Petty 15cm HKC-3002D
For the sake of viewer convenience, the content is shown below in one of the available alternative languages.
Mcusta Zanmai Classic Petty utility knife. Blade lenght is 15 cm. The blade of Mcusta Zanmai Classic Petty knife is coated with 33 layers of Damascus steel and has a VG-10 core. The handle is made from Corian, a composite material that consists of 2/3 natural minerals and 1/3 acrylic with pigment.
120,16 €

Agotado

Cuchillo Japones Mcusta Coreless Aranami Petty ZUA-1002C 15cm - 1
Agotado
Cuchillo de cocina Mcusta Zanmai Coreless Aranami Petty 15cm ZUA-1002C
For the sake of viewer convenience, the content is shown below in one of the available alternative languages.
Mcusta Zanmai  “coreless steel” series Petty knife with 15 cm blade. VG-10 and VG-2 are laminated together like Damascus steel. Literally there is no core of the steel, that's why this Mcusta kitchen knife series called "coreless". Also the blade patterns are remarkably clearer than on Damascus steel. Mcusta use  “ocean wave” motif which came from a traditional Japanese painting. Handle of Mcusta Zanmai Coreless Aranami Petty knife is made of red pakka wood with a bolster and bottom cap. Mosaic pin on handle and bottom cap. Each knife Mcusta Zanmai Ultimate Coreless Aranami goes in wooden box.
233,87 €

Agotado

Cuchillo Japones Santoku Mcusta Revolution ZRB-1203G 18cm - 1
Agotado
Cuchillo de cocina Santoku Mcusta Zanmai Revolution 18cm ZRB-1203G
For the sake of viewer convenience, the content is shown below in one of the available alternative languages.The Mcusta Zanmai Revolution SPG2 Santoku is a fantastic japanese chef's knife with a very thin 3-layer steel blade and SPG2 core, a japanese powder steel known for excellent resistance to wear and corrosion. Hardness level is 61HRC with an amazingly lasting sharpness. The soft line between the side supporting steel and the core steel makes an incredibly beautiful blade with design reminding of japanese swords. Revolution has an ergonomic soft, bent handle compared to many other models from japanese Zanmai. The beautifully designed handle of black pakka wood lies perfectly in the hand and gives a firm and steady grip. Blade length: 18 cm. Full length: 34 cm. Weight: 166 gram.
193,54 €

Agotado

Cuchillo Japones Gyuto Mcusta Forest HBG-6005M 21cm - 1
Agotado
Cuchillo de cocina Gyuto Mcusta Zanmai Forest 21cm HBG-6005M
For the sake of viewer convenience, the content is shown below in one of the available alternative languages.
Japanese chef knife gyuto Mcusta Zanmai Forest with 210 mm blade. Mcusta Zanmai Forest Molybdenum Series is a great introduction to high quality Japanese knives. For this series, Zanmai forges each blade using Molybdenum Vanadium 8A steel and sharpens them utilizing Zanmai's famous Hamaguri V-Cut form. This grinding method results in incredibly sharp knives that are easy to use and maintain. The handle’s end caps are mirror finished and provide additional balance. The beautiful green micarta hangles are triple-riveted to complete this professional quality knife at an affordable price. MyGoodKnife is an authorized dealer of Marusho Industry Inc (brand Mcusta Zanmai). All Mcusta knives and scissors at our stores are original and made is Seki city, Japan. Check our video to see interview with Mr.Tomohiro Hasegawa - president of Marusho Industry Inc (brand Mcusta Zanmai). Interview was made when Mr.Tomohiro visited or store in Helsinki.
104,03 €

Agotado

Cuchillo Japones Yanagiba Tojiro Shirogami for Left-Handed F-908L 24cm - 1
Agotado
Cuchillo de cocina Yanagiba Tojiro Shirogami for Left-Handed 24cm F-908L
For the sake of viewer convenience, the content is shown below in one of the available alternative languages.
Tojiro Shirogami Yanagi-Sashimi knife 24 cm for left-handed. Knife for sushi and sashimi has single edged blade. Core blade by Shirogami steel, outer layer by soft iron, it is easy to re-sharpen and has good edge retention. Handle of Shirogami Yanagi-Sashimi 24 cm is made from magnolia and has good water resistance. Tojiro Shirogami carbon knives should be used carefully. It is not recommended for such knives - to wash in dishwasher, to leave it in water, to clean by acid liquids, to cut acid fruits like lemon. Hand-dry your knife: This should be done immediately after washing with a clean dishtowel. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry.
133,88 €

Agotado