Chef's Knives

Filter by
Price
€ €
Manufacturers
Blade Length, mm
Country
Steel
Handle
Collection
Hardness
Sheath
Filter
Chef knife Miyabi 5000MCD 67 Gyutoh 34401-241-0 24cm - 1
Chef knife Miyabi 5000MCD 67 Gyutoh 24cm 34401-241-0
Zwilling Miyabi 5000MCD 67 japanese gyutoh 24 cm or chef's knife has a MicroCarbide powder steel MC66 core which gives extremely good sharpness and cutting edge retention. The blade has 132 outer layers of steel which surround the core and make up the unique Damascus-design pattern on the blade. The cutting edge is Honbazuke-honed and symmetrical (not single bevel), so can be used by those both right and left-handed. There is no finger guard so the whole length of the cutting edge can be used.The black Maple wood handle sits comfortably in the hand, allowing firm control and tireless working.It's recommended to hand wash only, maintain and sharpen on a whetstone and using glass, ceramic or stone cutting boards should be avoided. Rockwell hardness of approximately 66. Zwilling Miyabi 5000MCD 67 gyutoh chef's knife made in Japan.
€386.29

In stock

Chef knife Miyabi 5000FCD Gyutoh 34681-201-0 20cm - 1
Chef knife Miyabi 5000FCD RAW Gyutoh 20cm 34681-201-0
The gyutoh, or chef’s knife, is a general purpose knife for the preparation of larger cuts of meat and vegetables. It has a fine carbide steel core which gives the knife very good initial sharpness and cutting edge retention. The core is embedded in 48 layers of steel which create each knife’s unique Damascus-design. The symmetrical cutting edge is Honbazuke honed. This three-stage grinding, sharpening and polishing process gives the knife razor-like sharpness. The entire length of the edge can be used to cut as there is no finger guard. The join between handle and bolster is completely smooth, which helps to prevent calluses forming on the thumb and forefinger and gives a comfortable grip. Hand wash only for best care and avoid cutting on glass, ceramic or stone boards as these will prematurely dull the edge. Maintain and sharpen using whetstones. - FC61 fine carbide steel blade core; - 48 layers of steel surrounding the core create the Damascus-design; - FRIODUR ice-hardened for extreme hardness; - Rockwell hardness of approximately 61; - Symmetrical cutting edge; - Pakka wood handle; - Steel mosaic pin and handle end cap; - Made in Japan.
€200.81

Shipping after 10-20 business days

Santoku Japanese kitchen knife Miyabi 4000FC 33957-181-0 18cm - 1
Santoku Japanese kitchen knife Miyabi 4000FC 18cm 33957-181-0
MIYABI 4000FC santoku, or Japanese chef’s knife, with an 18cm blade. Experience the beauty of sharpness with the MIYABI 4000FC series. The blade is made from a single layer of FC61 steel, a proven material in terms of hardness (HRC 61) and durability. - Fine carbide 61 steel blade construction for a sharp, hard blade; - Rockwell hardness of 61 for durability and cutting edge retention; - Katana style cutting edge for excellent sharpness; - FRIODUR® ice-hardened blade for toughness, elasticity and corrosion resistance; - Engraved MIYABI logo on the blade; - Octagonal pakka wood handle for comfortable grip with mosaic pin. - Made in Japan
€153.22

Shipping after 10-20 business days

Gyuto Japanese kitchen knife Miyabi 5000FCD 34681-241-0 24cm - 1
Gyuto Japanese kitchen knife Miyabi 5000FCD RAW 24cm 34681-241-0
Zwilling Miyabi 5000FCD Gyutoh chef's knife 24 cm is perfectly balanced, contains a unique Damascus design and an incomparable edge. With a blade length of 24 cm, it is ideal for cutting meat and large vegetables, the Japanese equivalent of the European chef's knife. Gyutoh knife has a hard fine carbide steel core which gives very good cutting edge retention and sharpness. The FC61 steel core of the blade is embedded in 48 outer layers of Damascus-design steel, giving each knife its unique pattern. The cutting edge is symmetrical (not single bevel) so it’s suitable for both right and left-handed use. The edge is Honbazuke-honed – a three-stage grinding, sharpening and polishing process resulting in razor-like sharpness. There is no finger guard so the whole length of the cutting edge can be used. The pakka wood handle seamlessly joins the half-bolster. The smooth join helps to prevent calluses forming on the thumb and forefinger. For best care, it’s recommended to hand wash only. Maintain and sharpen on a whetstone, and using glass, ceramic or stone cutting boards should be avoided as this can prematurely dull the cutting edge. Zwilling Miyabi 5000FCD Gyutoh chef's knife made in Japan.
€225.00

Shipping after 10-20 business days

Gyuto Japanese kitchen knife Miyabi 5000FCD 34681-161-0 16cm - 1
Gyuto Japanese kitchen knife Miyabi 5000FCD RAW 16cm 34681-161-0
Zwilling Miyabi 5000FCD gyutoh chef's knife 16 cm is used as a general purpose knife for preparing larger cuts of meat and vegetables. Gyutoh knife has a hard fine carbide steel core which gives very good cutting edge retention and sharpness. The FC61 steel core of the blade is embedded in 48 outer layers of Damascus-design steel, giving each knife its unique pattern. The cutting edge is symmetrical (not single bevel) so it’s suitable for both right and left-handed use. The edge is Honbazuke-honed – a three-stage grinding, sharpening and polishing process resulting in razor-like sharpness. There is no finger guard so the whole length of the cutting edge can be used. The pakka wood handle seamlessly joins the half-bolster. The smooth join helps to prevent calluses forming on the thumb and forefinger. For best care, it’s recommended to hand wash only. Maintain and sharpen on a whetstone, and using glass, ceramic or stone cutting boards should be avoided as this can prematurely dull the cutting edge. Zwilling Miyabi 5000FCD gyutoh chef's knife made in Japan.
€176.61

Shipping after 10-20 business days

Gyuto Japanese kitchen knife Miyabi 6000MCT 34073-241-0 24cm - 1
Gyuto Japanese kitchen knife Miyabi 6000MCT Artisan 24cm 34073-241-0
Zwilling Miyabi 6000MCT Gyuto 24 cm chef's knife is suitable for cutting and separating fish and meat also vegetables. The double-edged blade and Honbazuke honing give the knife its sharpness. The authentic Japanese blade profile ensures the 24 cm long Gyuto is easy to use and will stay sharp. The knife is part of the MIYABI 6000MCT series and has a blade with a hammered finish and a Tsuchime look. The handle is made of premium, smooth-grained cocobolo pakka wood. A mosaic pin gives it a special design feature. The handle will retain its shape and has easy care properties. The knife is finely balanced to make cutting an effortless and pleasurable task. The blade is manufactured from MicroCarbide powder steel embedded between two additional steel layers. The central section achieves a hardness rating of around 63 Rockwell. The knife also undergoes special hardening procedures such as ice hardening at -196 degrees Celsius. This increases the blade's stability, flexibility, durability and robustness to provide you with a practical and sharp knife to effortlessly carry out a multitude of kitchen tasks. It's recommended to hand wash only, maintain and sharpen on a whetstone and using glass, ceramic or stone cutting boards should be avoided.
€257.26

Shipping after 10-20 business days

Chef knife Miyabi 5000MCD Chutoh 34372-161-0 16cm - 1
Chef knife Miyabi 5000MCD Chutoh 16cm 34372-161-0
Zwilling Miyabi 5000MCD Chutoh 16 cm. Each single knife Zwilling Miyabi 5000MCD Chutoh is an authentic master piece setting quality standards: 100 layers of two different steel grades with a different hardness encapsulate the hard core of MicroCarbide powder steel MC63. A special blade treatment changes the surface structure of each layer, thus creating the blade’s individual flower damask pattern. The CRYODUR blades are hardened during a specifically developed process (including ice-hardening at -196°C) that delivers the extreme hardness. The original Japanese Honbazuke honing gives the symmetric blade the scalpel-like sharpness that is the hallmark of all MIYABI knives. The traditional “D-handle” of masur birch ensures perfect balance, optimum control and tireless cutting. There are only best kitchen knives in MyGoodKnife’s range.
€273.39

Shipping after 10-20 business days

Gyuto Japanese kitchen knife Miyabi 7000D 34543-241-0 24cm - 1
Gyuto Japanese kitchen knife Miyabi 7000D 24cm 34543-241-0
Zwilling Miyabi 7000D Gyutoh 24 sm. - Blade of Zwilling Miyabi 7000D Gyutoh is made from steel with 65 layers and Damask design. - CRYODUR® blade, hardened in a specifically developed process (including ice-hardening at -196°C) for its extreme hardness. - Symmetric blades with an ultra-sharp Honbazuke honing. - The traditional “D-handle” allows tireless working in all cutting techniques. - Solid and easy-care Micarta handle of Zwilling Miyabi 7000D Gyutoh in fine wood texture, made from a multi-layered linen/resin compound in combination with stainless steel. There are only best kitchen knives in MyGoodKnife’s range.
€273.39

In stock

Gyuto Japanese kitchen knife Miyabi 7000D 34543-201 20cm - 1
Gyuto Japanese kitchen knife Miyabi 7000D 20cm 34543-201-0
Zwilling Miyabi 7000D Gyutoh 20 sm.- Blade of Zwilling Miyabi 7000D Gyutoh is made from steel with 65 layers and Damask design.- CRYODUR® blade, hardened in a specifically developed process (including ice-hardening at -196°C) for its extreme hardness.- Symmetric blades with an ultra-sharp Honbazuke honing.- The traditional “D-handle” allows tireless working in all cutting techniques.- Solid and easy-care Micarta handle of Zwilling Miyabi 7000D Gyutoh in fine wood texture, made from a multi-layered linen/resin compound in combination with stainless steel.There are only best kitchen knives in MyGoodKnife’s range.
€225.00

In stock

Chef knife Miyabi 7000D Chutoh 34542-161-0 16cm - 1
Chef knife Miyabi 7000D Chutoh 16cm 34542-161-0
Zwilling Miyabi 7000D Chutoh 16 sm. - Blade of Zwilling Miyabi 7000D Chutoh 16 sm is made from steel with 65 layers and Damask design. - CRYODUR® blade, hardened in a specifically developed process (including ice-hardening at -196°C) for its extreme hardness. - Symmetric blades with an ultra-sharp Honbazuke honing. - The traditional “D-handle” allows tireless working in all cutting techniques. - Solid and easy-care Micarta handle of Zwilling Miyabi 7000D Chutoh 16 sm in fine wood texture, made from a multi-layered linen/resin compound in combination with stainless steel. There are only best kitchen knives in MyGoodKnife’s range.
€200.81

Shipping after 10-20 business days

Chef knife Miyabi 5000MCD 67 Gyutoh 34401-201-0 20cm - 1
Sold out
Gyuto Japanese kitchen knife Miyabi 5000MCD 67 20cm 34401-201-0
Zwilling Miyabi 5000MCD 67 japanese gyutoh or chef's knife has a MicroCarbide powder steel MC66 core which gives extremely good sharpness and cutting edge retention. The blade has 132 outer layers of steel which surround the core and make up the unique Damascus-design pattern on the blade. The cutting edge is Honbazuke-honed and symmetrical (not single bevel), so can be used by those both right and left-handed. There is no finger guard so the whole length of the cutting edge can be used. The black Ash wood handle sits comfortably in the hand, allowing firm control and tireless working. It's recommended to hand wash only, maintain and sharpen on a whetstone and using glass, ceramic or stone cutting boards should be avoided. Rockwell hardness of approximately 66. Zwilling Miyabi 5000MCD 67 gyotoh chef's knife made in Japan.
€362.10

Sold out

Gyuto Japanese kitchen knife Miyabi 5000MCD 34373-201-0 20cm - 1
Sold out
Gyuto Japanese kitchen knife Miyabi 5000MCD 20cm 34373-201-0
Zwilling Miyabi 5000MCD Gyutoh, 20cm. The knives in the MIYABI 5000MCD series combine functionality with good looks in a supremely harmonious way. Since time immemorial, aesthetics have played a key role in Japanese cuisine. The look of a dish and the way it is presented on the plate are just as much a part of the pleasure as its taste and aroma. In the kitchen Japanese chefs are just as demanding where aesthetics are concerned as they over functionality. The MIYABI 5000MCD series of knives provides professionals and ambitious hobby chefs with a set of precision tools that combine perfect functionality and ergonomics with unique design. - Blade core of extremely hard MicroCarbide MC63 powder steel embedded in 100 layers of steel. - CRYODUR® blade, hardened using a specially developed process (including ice-hardening at –196°C) that guarantees extreme hardness. - Symmetrical blade with ultra-sharp Honbazuke honing. - Thin, stable blade with authentic Japanese blade profile: symmetrical cutting edge with 19° angle - Traditional “D” handle of Masur birch for perfect balance, optimum control and tireless cutting. There are only best kitchen knives in MyGoodKnife’s range.
€345.97

Sold out

Gyuto Japanese kitchen knife Miyabi 34373-241-0 24cm - 1
Sold out
Gyuto Japanese kitchen knife Miyabi 5000MCD 24cm 34373-241-0
Zwilling Miyabi 5000MCD Gyutoh, 24cm chef's knife is perfect for cutting or slicing through meat or fish. Its slim yet stable blade delivers a perfectly controlled and clean cut. It has an authentic Japanese profile with an extremely sharp Honbazuke honing and is symmetrically polished at an angle of 19 degrees. The blade is first sharpened twice on rotating stones and is then polished on a leather wheel. The gyutoh's handle is made of Masur birch to give each knife a unique wood-grain pattern. An end cap and subtly styled mosaic pin complete the knife's elegant look. The handle is D-shaped to give the knife perfect balance and control for effortless and precision cutting. The blade has beautiful Damask patterning and a hard core of MicroCarbide MC63 powder steel enclosed within 100 layers of two different steels. The CRYODUR® blade is ice-hardened at -196 degrees Celsius to achieve a hardness rating of around 63 Rockwell that keeps the blade sharp and flexible. It's recommended to hand wash only, maintain and sharpen on a whetstone and using glass, ceramic or stone cutting boards should be avoided. Zwilling Miyabi 5000MCD Gyutoh chef's knife made in Japan. There are only best kitchen knives in MyGoodKnife’s range.
€370.16

Sold out