Filtrer
Prix
€ €
Fabricants
Longueur des cordes, mm
Pays
Acier
Poignée
Série
Dureté
Filtrer
Gyuto Couteau Japonais Miyabi MIZU 32911-201-0 20cm
Sold out
Gyuto Couteau Japonais Miyabi MIZU 20cm 32911-201-0
Miyabi MIZU 5000MCT Gyutoh Japanese chef´s knife with its measuring 20 cm in length is suitable for cutting and separating fish and meat. Its pointed tip and sturdy enable clean cuts to be made. This series 5000MCT has a core of MC 63, microcarbide powder steel (63 HRC) covered with 2 layers of ice- hardened Cryodur stainless steel. Cutting edge has an angle of 19°. Hammered finish (Tsuchime) which prevents food from sticking to the blade and ergonomic handle of micarta. It's recommended to hand wash only, maintain and sharpen on a whetstone and using glass, ceramic or stone cutting boards should be avoided. Made in Seki, Japan. 
225,00 €

Sold out

Sujihiki Couteau Japonais Miyabi MIZU 32910-241-0 24cm
Sold out
Sujihiki Couteau Japonais Miyabi MIZU 24cm 32910-241-0
Miyabi MIZU 5000MCT Sujihiki Japanese knife with its long and narrow 24 cm blade with ergonomic handle is ideal for cutting meat, fish, fruits for thin slices. This series 5000MCT has a core of MC 63, microcarbide powdereel (63 HRC) covered with 2 layers of ice- hardened Cryodur stainless steel. Cutting edge has an angle of 19°. Hammered finish (Tsuchime) which prevents food from sticking to the blade and ergonomic handle of micarta. It's recommended to hand wash only, maintain and sharpen on a whetstone and using glass, ceramic or stone cutting boards should be avoided. Made in Seki, Japan. 
233,06 €

Sold out

Couteau à pain Miyabi MIZU 32916-241-0 23cm
Sold out
Couteau à pain Miyabi MIZU 23cm 32916-241-0
Miyabi MIZU 5000MCT Japanese bread knife 23 cm has a tough serrated edge, so it can easily cut through bread crusts and pastries. The double-edged blade and Honbazuke honing give the knife its sharpness. This series 5000MCT has a core of MC 63, microcarbide powdereel (63 HRC) covered with 2 layers of ice- hardened Cryodur stainless steel. Cutting edge has an angle of 19°. Hammered finish (Tsuchime) which prevents food from sticking to the blade and ergonomic handle of micarta. It's recommended to hand wash only. Using glass, ceramic or stone cutting boards should be avoided. Made in Seki, Japan. 
225,00 €

Sold out

Couteau Japonais Seki Kanetsugu Pro J Petty 6002 15cm
Sold out
Couteau Japonais Seki Kanetsugu Pro J Petty 15cm 6002
Petty knife with 15 cm blade from Seki Kanetsugu Pro J series. After yers of research for the ultimate performance kitchen knives in functional materials and design, Mr. Kawamura of Kanetsugu has released the innovative line of Pro J Series.Hammer Forged Tsuchime Blade has cladding blade construction. Blade core is made of special high grade Cobalt steel called ZA-18 from Aichi Steel Company, sandwiched with AUS-2 stainless steel. This is the first kitchen knife to use this new formula steel of ZA-18.Mr. Kawamura explains Aichi Steel Ccompany has recently developed this ZA-18 to compete or even outperform VG-10. It is heat treated and then ice hardened (Sub-Zero quench) to the Rockwell hardness of HRc. 60-61. The Chemical Composition of ZA-18 is similar to the VG-10, but contains higher Carbon (1.20 vs. 1.05), Chromium (18.0 vs. 15.5), Molybdenum (1.50 vs. 1.20) and Cobalt (1.80 vs. 1.5) for added hardness, durability and rust-resistance. In fact, before Mr. Kawamura decides to use this steel for Pro J Series, he has tested it many times and proved it's incredible cutting performance and potential. Japanese technology of the cladding blade construction also has many advantages in the durability and maintenance, because the AUS-2 outer steel protects the core steel, and makes the blade extra strong to bending and breaking for the different hardness steel layers.The handle is made of Black-Pakkawood handle, comes with nice accent of red color micro fiber spacer and stainless steel bolster. It is ergonomically designed with slightly slanted bolster forge welded into the tang and full tang hand rounded handle slab to fit with your hand.
68,55 €

Sold out

Gyuto Couteau Japonais Miyabi MIZU 32911-241-0 24cm
Sold out
Gyuto Couteau Japonais Miyabi MIZU 24cm 32911-241-0
Miyabi MIZU 5000MCT Gyutoh Japanese chef´s knife with its measuring 24 cm in length is suitable for cutting and separating fish, meat and vegetables. Its pointed tip and sturdy enable clean cuts to be made. This series 5000MCT has a core of MC 63, microcarbide powder steel (63 HRC) covered with 2 layers of ice- hardened Cryodur stainless steel. Cutting edge has an angle of 19°. Hammered finish (Tsuchime) which prevents food from sticking to the blade and ergonomic handle of micarta. It's recommended to hand wash only, maintain and sharpen on a whetstone and using glass, ceramic or stone cutting boards should be avoided. Made in Seki, Japan. 
241,13 €

Sold out

Gyuto Couteau Japonais Yoshimi Kato Black Nickel VG-10 D-1906 24cm
Sold out
Gyuto Couteau Japonais Yoshimi Kato Black Nickel VG-10 24cm D-1906
Couteau de chef japonais gyuto forgé à la main par Yoshimi Kato, artisan traditionnel certifié à Takefu, préfecture de Fukui au Japon. Lame VG - 10 Nickel Damas. Longueur de la lame 240 mm. Manche-palissandre. N'essayez pas de couper, de frapper ou de hacher des produits congelés ou des os. La lame peut s'écailler ou se casser. Laver à la main à l'eau tiède et sécher avec une serviette.
258,06 €

Sold out

Yanagiba Japanese kitchen knife Seki Kanetsugu sushi and sashimi 8022 24cm - 1
Sold out
Yanagiba Couteau Japonais Seki Kanetsugu Heptagon-Silver 24cm 8022
Single Bevel Edge with a slightly concaved flat back, solid High Carbon Molybdenum Vanadium Stainless steel blade is hand sharpened with Japanese whetstone for excellent cutting performance. Mr. Kawamura from Kanetsugu has been researching and challenged for different material, construction and design for extra advantages. The full blade tang is injection molded with dark blue heat-resistant ABS resin bolster/butt-end and silver anodized aluminum grip to prevent water getting into the handle for sanitary and rust resistance. The septangle shaped handle is also very unique and comfortable in your handle. When you look and hold the knife, you will feel a totally different texture and atmosphere.
64,52 €

Sold out

Gyuto Japanese kitchen knife Seki Kanetsugu 9006 23cm - 1
Sold out
Gyuto Couteau Japonais Seki Kanetsugu Saiun 23cm 9006
Famous Cobalt VG-10 Steel core forge-layered with Damascus Stainless steel blade. (Total 33 layers, HRC60 to 61). Beautiful Damascus pattern blade enhanced with elegant wood-grain and round shaped Black Linen Micarta Handle, This is a very durable and shrinkage proof Micarta material imported from Spain.
150,81 €

Sold out

Gyuto Couteau Japonais Yu Kurosaki Fujin VG10 Damascus Keyaki ZVD-180CH 18cm
Sold out
Gyuto Couteau Japonais Yu Kurosaki Fujin VG10 Damascus Keyaki 18cm ZVD-180CH
Yu Kurosaki Chef knife, 18 cm. Yu Kurosaki Fujin series fearture Nickel Damascus-patterned blades with a core of VG-10 stainless steel for professional with a hardness of 60-61 HRC, which provides excellent rust resistance and a long-lasting edge as well as its beautifulness. The blade surface has Damascus and unique hammered FUJIN texture which causes an image of a Japanese god believed to control the wind. The handle of Chef knife Fujin VG10 Damascus Series is made of Octagonal-shaped keyaki wood. Handmade by Mr. Yu Kurosaki. Yu Kurosaki works in Takefu Knife Village where he apprenticed with Hiroshi Kato.
237,90 €

Sold out

Couteau Japonais Seki Kanetsugu Nami Wine 92011 10cm
Sold out
Couteau Japonais Seki Kanetsugu Nami Wine 10cm 92011
Seki Kanetsugu Nami Steak knife Wine colour. Steak knife Nami is made of coreless Damascus (laminated material of VG2 and VG10), blending high-tech with swordsmith tradition, the highest quality comfort was born. Seki Kanetsugu uses  “ocean wave” motif which came from a traditional Japanese painting. The founder Kanetsugu began to make the Japanese swards in the 14th century at Mino. Now Seki Kanetsugu incorporates "Hamaguriha" which is the sectional shape of Japanese sword into kitchen knife, making knife that lasts sharpness. Seki Kanetsugu Nami Steak knives are not allowed to wash in dishwasher.
120,16 €

Sold out

Sujihiki Couteau Japonais Sukenari 3 layers ZDP189 S-116 27cm
Sold out
Sujihiki Couteau Japonais Sukenari 3 layers ZDP189 27cm S-116
Sukenari sujihiki knife. Blade lenght is 270 mm. Traditional Japanese octagonal magnolia handle. Blade of chef knife Sukenari is made of ZDP-189 steel (3 layers). This Sukenari sujihiki japanese knife is not allowed to wash by dishwasher. Japanese kitchen knives have very hard, but thin blade. It is not allowed to cut by japanese chef knives bones and meat with bones, coconuts and other nuts, other hard products. 
298,39 €

Sold out

Santoku Couteau Japonais Yoshimi Kato Ginsan D-702CW 17cm
Sold out
Santoku Couteau Japonais Yoshimi Kato Ginsan 17cm D-702CW
Couteau Santoku avec lame ginsan satinée fabriquée par Yoshimi Kato. Yoshimi Kato utilise l'acier Ginsan, ou Argent-3, comme élément principal de cette gamme de lames. L'acier G3 est bien connu pour ses excellentes propriétés de bord. Longueur de la lame 170 mm. Manche-cerisier. Pour santoku Yoshimi Kato Ginsan, il est recommandé de laver à la main à l'eau tiède et de sécher avec une serviette. Évitez les os, les aliments surgelés, les noix et les bonbons durs ou tout autre aliment que les fruits, les légumes et les protéines.
197,58 €

Sold out

Petty Couteau Japonais Makoto Kurosaki Petty STYLK-201 13.5cm
Sold out
Petty Couteau Japonais Makoto Kurosaki Petty 13.5cm STYLK-201
Japanese petty knife handmade by Makoto Kurosaki. 135 mm SPG2 blade with stainless steel clad. Handle: cherrywood. Handwash in warm water and towel dry. Do not cut frozen foods. Makoto Kurosaki is an exceptionally talented blacksmith working in Takefu Knife Village.
137,10 €

Sold out

Étui Tojiro Nakiri Saya 18 cm M-312
Sold out
Étui Tojiro Nakiri Saya 18 cm M-312
The M-312 saya will fit all Tojiro nakiri knives with blades up to 180 mm. About models of other manufactures, please, ask our consultants. Tojiro saya/wooden sheaths are made from magnolia wood which is a hard wood and is very light weight. Saya has small wooden pin which you remove to place your knife inside and you can then reattach the pin to make it safe. The saya are also very good if keeping knives in draws at home or in the professional kitchen as they will be protected from other sharp blade which can potentially chip or dull the cutting edge.
28,23 €

Sold out

Étui Tojiro Santoku Saya 18 cm M-311
Sold out
Étui Tojiro Santoku Saya 18 cm M-311
The M-311 saya will fit all Tojiro Santoku knives with blades up to 180mm. About models of other manufactures, please, ask our consultants. Tojiro saya/wooden sheaths are made from magnolia wood which is a hard wood and is very light weight. Saya has small wooden pin which you remove to place your knife inside and you can then reattach the pin to make it safe. The saya are also very good if keeping knives in draws at home or in the professional kitchen as they will be protected from other sharp blade which can potentially chip or dull the cutting edge.
28,23 €

Sold out

copy of Yanagiba Japanese kitchen knife Tojiro MV F-1057 24cm - 1
Sold out
Yanagiba Couteau Japonais Tojiro MV 27cm F-1058
Tojiro MV Resin Collar Yanagi-Sashimi with 270mm blade. Blade made from wear and rust resistant Molybdenum Vanadium steel. So that its maintenance is easier than carbon steel knives and therefore suitable for beginners. However, edge is carefully sharpened without compromise by our craftsman. Handle is made from magnolia and has good water resistance. Weight of Tojiro MV Yanagiba F-1058 knife is 145 g. Like other traditional Japanese knife blades, this knife has a bevel on only one side of the blade, to help achieve even slices.
109,68 €

Sold out

Nakiri Couteau Japonais TOJIRO Zen Black FD-1568 16.5cm
Sold out
Nakiri Couteau Japonais TOJIRO Zen Black 16.5cm FD-1568
Le couteau nakiri Tojiro Zen Black FD-1568 possède une lame de 165 mm. Ce couteau de cuisine japonais, idéal pour trancher et hacher, est principalement utilisé pour les légumes. Sa lame est composée d'un noyau en acier VG-10 et de parements en acier chromé noir. Le manche ovale traditionnel japonais en bois de châtaignier passe au lave-vaisselle et convient parfaitement à la découpe d'aliments congelés, d'os et d'autres aliments très durs. Le couteau nakiri Tojiro Zen Black FD-1568 pèse 145 g et est présenté dans un élégant coffret de la marque.
127,49 €

Sold out

Sujihiki Japanese kitchen knife Mcusta Forest HBG-6011M 27cm - 1
Sold out
Sujihiki Couteau Japonais Mcusta Zanmai Forest 27cm HBG-6011M
Japanese slicing knife sujihiki Mcusta Zanmai Forest with 270 mm blade. Mcusta Zanmai Forest Molybdenum Series is a great introduction to high quality Japanese knives. For this series, Zanmai forges each blade using Molybdenum Vanadium 8A steel and sharpens them utilizing Zanmai's famous Hamaguri V-Cut form. This grinding method results in incredibly sharp knives that are easy to use and maintain. The handle’s end caps are mirror finished and provide additional balance. The beautiful green micarta hangles are triple-riveted to complete this professional quality knife at an affordable price. MyGoodKnife is an authorized dealer of Marusho Industry Inc (brand Mcusta Zanmai). All Mcusta knives and scissors at our stores are original and made is Seki city, Japan. Check our video to see interview with Mr.Tomohiro Hasegawa - president of Marusho Industry Inc (brand Mcusta Zanmai). Interview was made when Mr.Tomohiro visited or store in Helsinki.
128,22 €

Sold out

Santoku Japanese kitchen knife Mcusta Supreme Ripple Damascus TZ2-4003DR 18cm - 1
Sold out
Santoku Couteau Japonais Mcusta Zanmai Supreme Ripple Damascus 18cm TZ2-4003DR
Mcusta Zanmai Supreme Ripple Damascus Santoku with 18 cm blade. Weight is 169 g. Mcusta Supreme Ripple Damascus series feature 33 layers of Damascus-patterned blades with a core of high carbon VG-10 stainless steel, which provides excellent rust resistance and a long-lasting edge as well as its beautifulness.In addition, the unique Ripple pattern is originally created by the Zanmai technology, which you may never find it in the world.The design represents ocean and shore line. It's associated with a Japanese traditional picture in the Edo era.MyGoodKnife is an authorized dealer of Marusho Industry Inc (brand Mcusta Zanmai). All Mcusta knives and scissors at our stores are original and made is Seki city, Japan.Check our video to see interview with Mr.Tomohiro Hasegawa - president of Marusho Industry Inc (brand Mcusta Zanmai). Interview was made when Mr.Tomohiro visited or store in Helsinki.
152,41 €

Sold out

Sujihiki Japanese kitchen knife Mcusta Coreless Aranami ZUA-1010C 24cm - 1
Sold out
Sujihiki Couteau Japonais Mcusta Zanmai Coreless Aranami 24cm ZUA-1010C
Mcusta Zanmai  “coreless steel” series Sujihiki slicing knife with 24 cm blade. VG-10 and VG-2 are laminated together like Damascus steel. Literally there is no core of the steel, that's why this Mcusta kitchen knife series called "coreless". Also the blade patterns are remarkably clearer than on Damascus steel. Mcusta use  “ocean wave” motif which came from a traditional Japanese painting. Handle of Mcusta Zanmai Coreless Aranami Sujihiki knife is made of red pakka wood with a bolster and bottom cap. Mosaic pin on handle and bottom cap. Each knife Mcusta Zanmai Ultimate Coreless Aranami goes in wooden box.
394,35 €

Sold out

Santoku Japanese kitchen knife Tojiro Shippu Black FD-1597 16.5cm
Sold out
Santoku Couteau Japonais Tojiro Shippu Black 16.5cm FD-1597
Tojiro Shippu Black DP Damascus Steel Santoku with 165mm blade. By forging steel of two different hardness over and over, elegant ripple pattern emerges and high uniformity of core steel VG10 eventually generate maximum sharpness. Black oxide processing, which is the technology often used for medical equipment, has been applied on blade. The blade thus has both outstanding corrosion resistance and beautiful visual aspect. Chestnut handle has excellent durability, and additionally applied fire treatment on surface makes it even stronger.
154,84 €

Sold out

Couteau Japonais Shiro Kamo Kama-Usuba G-0104 16.5cm
Sold out
Couteau Japonais Shiro Kamo Kama-Usuba 16.5cm G-0104
Kama-Usuba knife is handmade by Shiro Kamo. Blade lenght is 165 mm. Traditional Japanese octagonal handles in rosewood. Blade is made of Shirogami steel, 11 layers. This japanese knife is not allowed to wash by dishwasher. Knife by mr. Shiro Kamo has very hard, but thin blade. It is not allowed to cut by japanese chef knives bones and meat with bones, coconuts and other nuts, other hard products. The smith Shiro Kamo crafts his blades in the Takefu Knife Village. Shiro Kamo, born in 1958, was honored for his skill with the famous Japanese title "Dento-Kogei-shi" at age 45 (Master of Traditional Craft). Currently, he is President of the Takefu Knife Village Association.
160,48 €

Sold out

Couteau Japonais Yoshimi Kato Petty D-500 12cm
Sold out
Couteau Japonais Yoshimi Kato Petty 12cm D-500
Japanese utility Petty knife hand forged by Yoshimi Kato who is a certified traditional craftsman in Takefu, Fukui prefecture in Japan. Blade - Aogami carbon steel with stainless steel clad. Blade length 120 mm. Handle – cherrywood. Hand wash with warm water and towel dry.
152,42 €

Sold out

Sujihiki Couteau Japonais Ittetsu Shirogami IW11813 27cm
Sold out
Sujihiki Couteau Japonais Ittetsu Shirogami 27cm IW11813
Sujihiki Ittetsu with 270 mm blade is a double edge slicing knife with a long narrow blade that smoothly slices through meat or vegetables and preserves the integrity of each ingredient's freshness. This Ittetsu sujihiki is made from 3 layers of material: iron clad and Shirogami steel. A layer of iron on each side protecting a layer of carbon steel at the core, in a process referred to as Sanmai or forge welding. Iron and carbon steel are both susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Handle: waterproof mono octagonal walnut. Ittetsu knives are handmade in Echizen city, Japan. Hand wash with warm water and towel dry. 
208,87 €

Sold out