Filtrer
Prix
Fabricants
Blade Length, mm
Country
Steel
Handle
Collection
Hardness
Lock
Filtrer
Sold out
Bunka Couteau Japonais Tsutomu Kajiwara 21cm TK-1121BGA
Bunka knife handmade by Tsutomu Kajiwara. Blade 210 mm is made of Aogami 2 steel with iron damascus clad. Traditional handle is made of bocote wood with God’s ash ferrule. Please, use your Tsutomu Kajiwara knife carefully. It is not recommended for such knives - to wash in dishwasher, to leave it in water, to clean by acid liquids, to cut acid fruits like lemon. Hand-dry your knife: This should be done immediately after washing with a clean dishtowel. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry.
189,52 €

Sold out

Sold out
Nakiri Couteau Japonais Yu Kurosaki Raijin Forged Cobalt 16.5cm ZCS-165NAOWQ
Yu Kurosaki Raijin nakiri knife with 165 mm blade. The Nakiri is a double bevel edged knife is used as a vegetable slicer. The handle is made this time of oak and water-resistant wenge wood, which are separated from each other by a ring of natural turquoise. Raijin, the Japanese god of thunder is the inspiration Kurosaki-san used for the hand hammered pattern on these blades; evoking a "crack!" of lightning. Folds of Damascus steel play in contrast with that unique texture creating a stunning look. With a core of high quality Cobalt Special Steel that is able to take and hold an extremely sharp edge. Cobalt Special is registered trademark of Takefu Special Steel Co Ltd. It is super high grade steel, it containing lots of cobalt.
282,26 €

Sold out

Sold out
Petty Couteau Japonais Yu Kurosaki Raijin Forged Cobalt 12cm ZCS-120PEOWQ
Handcrafted by Yu Kurosaki petty knife Raijin. The blade length is 12 cm. The octagonal handle is made this time of oak and water-resistant wenge wood, which are separated from each other by a ring of natural turquoise. Raijin, the Japanese god of thunder is the inspiration Kurosaki-san used for the hand hammered pattern on these blades; evoking a "crack!" of lightning. Folds of Damascus steel play in contrast with that unique texture creating a stunning look. With a core of high quality Cobalt Special Steel that is able to take and hold an extremely sharp edge. Cobalt Special is registered trademark of Takefu Special Steel Co Ltd. It is super high grade steel, it containing lots of cobalt. The edge retention and the sharpness are better than VG10 which has good reputation in the world. Handle is made of oak, turquoise ring.  
250,00 €

Sold out

Sold out
Kiritsuke Couteau Japonais Hideo Kitaoka Shirogami 24cm CN-2216
Handmade single-beveled kiritsuke knife by Mr. Hideo Kitaoka. 24 cm blade is made of carbon steel with Shirogami steel core Handle made of a natural pakkawood.  Hideo Kitaoka in Takefu, Fukui Province specializes in the production of high-quality single-edged kitchen knives. Please, use your carbon knives carefully. It is not recommended for such knives - to wash in dishwasher, to leave it in water, to clean by acid liquids, to cut acid fruits like lemon. Hand-dry your knife: This should be done immediately after washing with a clean dishtowel. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry.
177,42 €

Sold out

Sold out
Gyuto Couteau Japonais Yu Kurosaki Raijin Forged Cobalt 24cm ZCS-240CHOWQ
 This Japanese chef knife Gyuto Raijin Forget Cobalt special series is handcrafted by the Japanese craftsman Yu Kurosaki.  The blade length is 24 cm. Raijin, the Japanese god of thunder is the inspiration Kurosaki-san used for the hand hammered pattern on these blades; evoking a "crack!" of lightning. Folds of Damascus steel play in contrast with that unique texture creating a stunning look. With a core of high quality Cobalt Special Steel that is able to take and hold an extremely sharp edge. Cobalt Special is registered trademark of Takefu Special Steel Co Ltd. It is super high grade steel, it containing lots of cobalt. The edge retention and the sharpness are better than VG10 which has good reputation in the world. Handle is made of oak, turquoise ring.  
346,77 €

Sold out

Sold out
Gyuto Couteau Japonais Tsutomu Kajiwara 21cm TK-1123
Japanese Chef knife gyuto handmade by Tsutomu Kajiwara. Blade 21 cm is made of Aogami 2 steel with iron damascus clad. Traditional japanese wooden handle. Please, use your Tsutomu Kajiwara knife carefully. It is not recommended for such knives - to wash in dishwasher, to leave it in water, to clean by acid liquids, to cut acid fruits like lemon. Hand-dry your knife: This should be done immediately after washing with a clean dishtowel. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry.
185,48 €

Sold out

Sold out
Nakiri Couteau Japonais Tsutomu Kajiwara 16.5cm TK-1117
Nakiri knife handmade by Tsutomu Kajiwara. Blade 165 mm is made of Aogami 2 steel with iron damascus clad. Traditional japanese wooden handle. Please, use your Tsutomu Kajiwara knife carefully. It is not recommended for such knives - to wash in dishwasher, to leave it in water, to clean by acid liquids, to cut acid fruits like lemon. Hand-dry your knife: This should be done immediately after washing with a clean dishtowel. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry.
181,45 €

Sold out

Sold out
Couteau Japonais Ittetsu Honesuki Aogami 2 15cm ISW-06
Ittetsu Honesuki knife with 15 cm blade. Honesuki is specifically designed for de-boning and breaking down poultry, but is also capable of filleting fish or meat and carrying out many tasks. Blade is made of Aogami 2 steel. This is very similar to white paper steel but with tungsten and chromium added to it which helps with edge retention and slows down rusting. The steel has then been hardened to 62-63 Rockwell and wrapped in stainless steel to further ease maintenance. Handle is made of walnut. Ittetsu knives are handmade in Echizen city, Japan. Hand wash with warm water and towel dry. 
120,16 €

Sold out

Sold out
Santoku Couteau Japonais Miyabi 800DP Hibana Rocking 18cm 54488-181-0
The Miyabi 800DP Hibana Rocking 54488-181-0 supports Western circular motion and Asian chopping. The versatile blade is ideal for chopping vegetables, slicing through meats and preparing fish. Sleek black and brass spacers on the handle add to the beauty and weight that promotes sturdiness in hand and maneuverability at the tip. The MIYABI Hibana collection features a beautiful 49-layer Spark Damascus pattern on the blade that both strengthens and protects the core of FC61 steel. FRIODURx2 hardening improves the microstructure of the steel for improved cutting performance, corrosion resistance and durability. It's recommended to hand wash only, maintain and sharpen on a whetstone and using glass, ceramic or stone cutting boards should be avoided. Handcrafted in Seki, Japan.
225,00 €

Sold out

Sold out
Nakiri Couteau Japonais Zwilling J.A.Henckels Twin Fin II 16.5cm 30925-171-0
Comfortable nakiri Japanese kitchen knife Zwilling J.A.Henckels Twin Fin II 30925-171-0 is suitabl for chopping vegetables. The curved bolster acts as an extension of the hand and the ergonomic steel handle with gilled design is hygienic and exceptionally well balanced, promoting fatigue-free cutting even for the largest chopping tasksWith a FRIODUR ice-hardened blade made of Nitro 60 special formula stainless steel, these knives boast long-lasting durability. Made in Seki, Japan. Dishwasher safe.
87,90 €

Sold out

Sold out
Sujihiki Couteau Japonais Zwilling J.A.Henckels Twin Fin II 23cm 30910-231-0
Exceptionally comfortable kitchen knife Zwilling J.A.Henckels Twin Fin II 30910-231 with a long narrow blade that smoothly slices through meat or vegetables. With a FRIODUR ice-hardened blade made of Nitro 60 special formula stainless steel, these knives boast long-lasting durability. The curved bolster acts as an extension of the hand and the ergonomic steel handle with gilled design is hygienic and exceptionally well balanced, promoting fatigue-free cutting even for the largest chopping tasks. Made in Seki, Japan. Dishwasher safe.
91,94 €

Sold out

Sold out
Sujihiki Couteau Japonais Ittetsu Shirogami Iron Clad 24cm IW-11812Z
The Japanese double edge slicing knife Ittetsu Sujihiki IW-11812Z  with 240 mm blade. This blade is made from 3 layers of material: iron clad and Shirogami steel. A layer of iron on each side protecting a layer of carbon steel at the core, in a process referred to as Sanmai or forge welding. Iron and carbon steel are both susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Avoid Bones, Frozen foods, nuts and hard candies or anything other than fruits, vegetables and proteins. Handle is made of waterproof mono octagonal Keyaki (Zelkova). Ittetsu knives are handmade in Echizen city, Japan. Hand wash with warm water and towel dry.
116,94 €

Sold out

Sold out
Couteau Japonais Ittetsu Mioroshi Forge-welded 21cm IJF-11115
Japanese kitchen Ittetsu Mioroshi IJF-11115  knife with 210 mm forge-welded blade made of Shirogami #2 carbon steel. Mioroshi is perfectly suited to filleting and portioning fish, but it can also slice fish quite well. Mioroshi is a knife like a cross between a sashimi knife and a deba knife. The blade is long and is thicker than shobu but thinner than deba. The oval shaped handle is made of magnolia wood. The blade is single bevel. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Hand wash with warm water and towel dry. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry. Ittetsu knives are handmade in Echizen city, Japan.
125,00 €

Sold out

Sold out
Bunka Couteau Japonais Ittetsu Aogami 2 17cm ISN-13
Bunka Japanese kitchen knife Ittetsu Aogami 2 ISN-13 with 17 cm blade. Blade is made of Aogami 2 steel. This is very similar to white paper steel but with tungsten and chromium added to it which helps with edge retention and slows down rusting. The steel has then been hardened to 62-63 Rockwell and wrapped in stainless steel to further ease maintenance. Handle is antibacterial bubinga. Ittetsu knives are handmade in Echizen city, Japan. Hand wash with warm water and towel dry. 
144,35 €

Sold out

Sold out
Tojiro Shippu Black gift set
Tojiro Shippu Black gift set includes Santoku Knife with 16,5 cm blade and Utility/Paring knife with 13 cm blade. Both knives are made of damascus laminated steel 37/63 layers (Floating Mist). This process allows the thin center layer of VG-10 steel to be extremely hard & sharp but the blade retains flexibility & strength. The comfortable handles are made from chestnut wood, which has good water resistance and smooth surface. Water buffalo ferrule prevents blade from rattling and coming off. Wooden box.
217,74 €

Sold out

Sold out
Petty Couteau Japonais Shigeki Tanaka VG10 Damascus 15cm ST-1403
Petty knife VG10 Damascus ST-1403 handmade in Japan by Mr. Shigeki Tanaka. Blade length 15 cm. The blade is made of VG-10 premium Japanese knife steel. Petty knife made by Shigeki Tanaka has octagonal walnut handle. Only hand wash allowed.
135,48 €

Sold out

Sold out
Nakiri Couteau Japonais Tsutomu Kajiwara 18cm TK-1118BGA
Nakiri knife handmade by Tsutomu Kajiwara. Blade 180 mm is made of Aogami 2 steel with iron damascus clad. Traditional handle is made of bocote wood with God’s ash ferrule. Please, use your Tsutomu Kajiwara knife carefully. It is not recommended for such knives - to wash in dishwasher, to leave it in water, to clean by acid liquids, to cut acid fruits like lemon. Hand-dry your knife: This should be done immediately after washing with a clean dishtowel. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry.
200,81 €

Sold out

Sold out
Sujihiki Couteau Japonais Yu Kurosaki Fujin VG-10 Damascus Rosenwood 27cm ZVD-270SLR
Japanese damascus kitchen knife sujihiki handmade by Mr. Yu Kurosaki. VG-10 Damascus steel, rosenwood wood handles. The Sujihiki is a double edge slicing knife with a long narrow blade that smoothly slices through meat or vegetables. Weight is 185 g. Blade length of Sujihiki Fujin VG-10 Damascus Yu Kurosaki is 270 mm.
321,77 €

Sold out

Sold out
Santoku Couteau Japonais Seki Kanetsugu Saiun 17cm 9003
Ce couteau Santoku utilitaire est doté d'une lame à noyau en acier cobalt VG-10 forgée en couches d'acier inoxydable Damas. Total 33 couches avec une dureté HRC60 à 61. Belle lame à motif damas rehaussée d'un élégant grain de bois et d'un manche rond en micarta noir. Le couteau Santoku Seki Kanetsugu est fabriqué au Japon.
120,97 €

Sold out

Sold out
Bunka Couteau Japonais Yu Kurosaki Shizuku R2 Oak 16.5cm ZR-165BUOWQ
Yu Kurosaki Shizuku Bunka knife with 165 mm blade. This Yu Kurosaki series features R2 tsuchime-finish blades. This bunka knife has an incredible level of finish and polish, with Kurosaki's signature "Shizuku" Tsuchime patterns that are both aesthetically pleasing and functional. The octagonal handle is made this time of oak and water-resistant wenge wood, which are separated from each other by a ring of natural turquoise. Wash and dry with a soft sponge, and safely store after use. Avoid cutting into bones, frozen foods, hard fruit pits. Recommended cutting surface: wood, rubberized boards and high-end composites, and quality plastics such as polyethene make acceptable cutting surfaces, and will help protect and prolong knife’s edge. Avoid glass, metal, countertops, and other rigid, non-forgiving surfaces. Yu Kurosaki works in Takefu Knife Village.
282,26 €

Sold out

Sold out
Couteau Japonais Spyderco Minarai Bunka Bocho 19.9cm SCK18PBK
Japanese kitchen knife Spyderco Minarai Bunka Bocho K18PBK is designed by world-renowned knifemaker Murray Carter, official heir to a 420-year-old Japanese bladesmithing lineage, Spyderco’s Murray Carter Collection faithfully translates Carter’s coveted handcrafted designs into affordable factory-made kitchen cutlery. The newest additions to this proud family of knives are his Minarai Series. Literally meaning “to look and learn,” minarai is a quintessentially Japanese way of describing the role of an apprentice. In that spirit, the Minarai Series expresses five of Carter’s highly refined designs in an economical format featuring solid CTS® BD1N stainless steel blades and injection-molded polypropylene handles. A remarkable fusion of time-tested traditional designs and state-of-the-art modern materials.
Minarai Bunka Bocho overall length 322 mm. Blade length 199 mm. Made in Japan.
153,23 €

Sold out

Sold out
Couteau Japonais Ittetsu Usuba Forge-welded 18cm IJF-11141
Designed specifically for cutting vegetables the Japanese kitchen knife Ittetsu Usuba IJS-11141 with 180 mm forge-welded blade made of Shirogami #2 carbon steel. As another tool in the kitchen, the Usuba knife can become invaluable when preparing traditional Japanese cuisine. The oval shaped handle is made of magnolia wood. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.
108,87 €

Sold out

Sold out
Couteau Japonais 3086 - Ittetsu Mioroshi Forge-welded 24cm IJF-11116
Japanese kitchen Ittetsu Mioroshi IJF-11116  knife with 240 mm forge-welded blade made of Shirogami #2 carbon steel. Mioroshi is perfectly suited to filleting and portioning fish, but it can also slice fish quite well. Mioroshi is a knife like a cross between a sashimi knife and a deba knife. The blade is long and is thicker than shobu but thinner than deba. The oval shaped handle is made of magnolia wood. The blade is single bevel. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Hand wash with warm water and towel dry. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry. Ittetsu knives are handmade in Echizen city, Japan.
135,00 €

Sold out

Sold out
Deba Couteau Japonais Ittetsu Forge-welded Shirogami 2 12cm IJF-11104
The japanese kitchen knife Ittetsu Deba IJF-11104 with 120 mm forge-welded blade made of Shirogami #2 carbon steel. This deba is used for small fish, meat and vegetable. The oval shaped handle is made of magnolia wood. The blade is single bevel. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.
79,84 €

Sold out