Filtrer
Prix
Fabricants
Blade Length, mm
Country
Steel
Handle
Collection
Hardness
Lock
Filtrer
Sold out
Santoku Couteau Japonais Kunio Masutani VG-10 Damascus 14cm M-3246
Kunio Masutani santoku knife M-3246 with 15 cm blade. The very sharp, rustproof blades are ground on both sides and consist of a Damascus steel construction with a robust VG-10 core. The black handle is made of pakkawood. Not allowed to wash in dishwasher.
79,84 €

Sold out

Sold out
Santoku Couteau Japonais Kunio Masutani VG-10 Damascus 17cm M-3221
Kunio Masutani santoku knife with 17 cm blade. The very sharp, rustproof blades are ground on both sides and consist of a Damascus steel construction with a robust VG-10 core and kokuryu finish. The black handle is made of pakka wood. Not allowed to wash in dishwasher.
88,71 €

Sold out

Sold out
Petty Couteau Japonais Mcusta Zanmai Forest 12cm HBG-6001M
Japanese kitchen knife Mcusta Zanmai Forest Petty with 120 mm blade. Mcusta Zanmai Forest Molybdenum Series is a great introduction to high quality Japanese knives. For this series, Zanmai forges each blade using Molybdenum Vanadium 8A steel and sharpens them utilizing Zanmai's famous Hamaguri V-Cut form. This grinding method results in incredibly sharp knives that are easy to use and maintain. The handle’s end caps are mirror finished and provide additional balance. The beautiful green micarta hangles are triple-riveted to complete this professional quality knife at an affordable price.
66,94 €

Sold out

Sold out
Couteau Japonais Yoshimi Kato Katana Aogami Super S/S clad Cherry 16cm D-911
Japanese utility kitchen knife made by Yoshimi Kato. Blade is made of Aogami Super steel with stainless steel clad. Blade length is 160 mm. Handle – cherrywood. Recommended hand wash with warm water and towel dry. Avoid bones, frozen foods, nuts and hard candies or anything other than fruits, vegetables and proteins.
177,42 €

Sold out

Sold out
Petty Couteau Japonais Mcusta Zanmai Forest 15cm HBG-6002M
Mcusta Zanmai Forest Petty knife with 150 mm blade. Mcusta Zanmai Forest Molybdenum Series is a great introduction to high quality Japanese knives. For this series, Zanmai forges each blade using Molybdenum Vanadium 8A steel and sharpens them utilizing Zanmai's famous Hamaguri V-Cut form. This grinding method results in incredibly sharp knives that are easy to use and maintain. The handle’s end caps are mirror finished and provide additional balance. The beautiful green micarta handles are triple-riveted to complete this professional quality knife at an affordable price.
71,77 €

Sold out

Sold out
Nakiri Couteau Japonais Mcusta Zanmai Ultimate Unkai 16.5cm ZUU-1108D
Mcusta Zanmai Ultimate Unkai  Nakiri vegetable knife. Blade lenght is 165 mm. The blade of Mcusta Zanmai Ultimate Unkai  nakiri knife is made of of Damascus steel (VG-10), 33 layers. The handle is made of pakka wood with mosaic pin. MyGoodKnife is an authorized dealer of Marusho Industry Inc (brand Mcusta Zanmai). All Mcusta knives at our stores are original and made is Seki city, Japan. Check our video to see interview with Mr.Tomohiro Hasegawa - president of Marusho Industry Inc (brand Mcusta Zanmai). Interview was made when Mr.Tomohiro visited or store in Helsinki.
258,06 €

Sold out

Sold out
Kiritsuke Couteau Japonais Sukenari ZDP-189 Light Bocote 24cm S-148
Kiritsuke knife Sukenari with 24 cm blade. The blade is made of powder tool steel ZDP-189 (3 layers). ZDP-189 is high-end stainless steel produced by the Japanese HITACHI company using the PM process.  It contains high volumes of carbon and content and has reputation for being one of the hardest steels you can find in the knife industry. It’s also well-known for its razor-sharp edge, great wear and corrosion resistance, and great durability. This knife has a unique natural wooden texture of octagonal Bocote wood handle, which has a buffalo horn ferrule. This Sukenari japanese chef knife is not allowed to wash by dishwasher. Japanese kitchen knives have very hard, but thin blade. It is not allowed to cut by japanese chef knives bones and meat with bones, coconuts and other nuts, other hard products. 
402,42 €

Sold out

Sold out
Kiritsuke Couteau Japonais Sukenari ZDP-189 Light Bocote 21cm S-147
Kiritsuke Japanese kitchen knife Sukenari ZDP-189 Light Bocote S-147 with blade lenght is 210 mm. This knife has a unique natural wooden texture of octagonal Bocote wood handle, which has a buffalo horn ferrule. The blade is made of powder tool steel ZDP-189 (3 layers). ZDP-189 is high-end stainless steel produced by the Japanese HITACHI company using the PM process.  It contains high volumes of carbon and content and has reputation for being one of the hardest steels you can find in the knife industry. It’s also well-known for its razor-sharp edge, great wear and corrosion resistance, and great durability. This Sukenari japanese knife is not allowed to wash by dishwasher. Japanese kitchen knives have very hard, but thin blade. It is not allowed to cut by japanese chef knives bones and meat with bones, coconuts and other nuts, other hard products. 
383,06 €

Sold out

Sold out
Kiritsuke Couteau Japonais Sukenari ZDP-189 Bocote 21cm S-127
The kiritsuke Japanese kitchen knife Sukenari ZDP-189 Bocote S-127. Blade lenght is 210 mm. The blade is made of powder tool steel ZDP-189 (3 layers). ZDP-189 is high-end stainless steel produced by the Japanese HITACHI company using the PM process.  It contains high volumes of carbon and content and has reputation for being one of the hardest steels you can find in the knife industry. It’s also well-known for its razor-sharp edge, great wear and corrosion resistance, and great durability. This knife has a unique natural wooden texture of octagonal Bocote wood handle, which has a buffalo horn ferrule. This Sukenari japanese knife is not allowed to wash by dishwasher. Japanese kitchen knives have very hard, but thin blade. It is not allowed to cut by japanese  knives bones and meat with bones, coconuts and other nuts, other hard products. 
383,06 €

Sold out

Sold out
Kiritsuke Couteau Japonais Sukenari 3 layers HAP-40 27cm S-3112
Sukenari kiritsuke knife S-3112. Blade length is 270 mm. Traditional Japanese octagonal magnolia handle. Blade of kiritsuke knife Sukenari is made of HAP-40 steel (3 layers). This Sukenari kiritsuke japanese knife is not allowed to wash by dishwasher. Japanese kitchen knives have very hard, but thin blade. It is not allowed to cut by japanese chef knives bones and meat with bones, coconuts and other nuts, other hard products. 
346,77 €

Sold out

Sold out
Kiritsuke Couteau Japonais Sukenari 3 layers HAP 40 24cm S-3111
Sukenari kiritsuke knife S-3111. Blade length is 240 mm. Traditional Japanese octagonal magnolia handle. Blade of kiritsuke knife Sukenari is made of HAP 40 steel (3 layers). This Sukenari kiritsuke japanese knife is not allowed to wash by dishwasher. Japanese kitchen knives have very hard, but thin blade. It is not allowed to cut by japanese chef knives bones and meat with bones, coconuts and other nuts, other hard products. 
306,45 €

Sold out

Sold out
Couteau Japonais Hideo Kitaoka Honesuki 15cm Ao2
Handmade honesuki knife by Mr. Hideo Kitaoka. Aogami steel with iron clad. Handle made of rosenwood. The Honesuki is a Japanese style boning knife. Originally designed for poultry. Hideo Kitaoka in Takefu, Fukui Province specializes in the production of high-quality single-edged kitchen knives. Please, use your carbon knives carefully. It is not recommended for such knives - to wash in dishwasher, to leave it in water, to clean by acid liquids, to cut acid fruits like lemon. Hand-dry your knife: This should be done immediately after washing with a clean dishtowel. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry.
193,55 €

Sold out

Sold out
Deba Couteau Japonais Tojiro Aogami 18cm F-977
Tojiro Aogami Deba Knife with 180 mm blade. Blade is made from premium carbon steel Aogami, it has excellent sharpness and wear resistance. A bit of experience may necessary for re-sharpening, however holds very good edge retention. Handle made from Japanese magnolia wood, which has good water resistance and smooth surface. Water buffalo ferrule prevents blade from rattling and coming off. Affectionate back side with rounded edge.
Weight of Tojiro Aogami Deba F-977 knife is 315 g. Deba is traditionally used to clean and fillet whole fish, but it is also commonly used for breaking down and dressing poultry and meats with small bones.
Please, use your carbon knives carefully. It is not recommended for such knives - to wash in dishwasher, to leave it in water, to clean by acid liquids, to cut acid fruits like lemon. Hand-dry your knife: This should be done immediately after washing with a clean dishtowel. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry.
308,87 €

Sold out

Sold out
Santoku Couteau Japonais Miyabi 5000MCD 67 18cm 34404-181-0
Zwilling Miyabi 5000MCD 67 Japanese santoku 18 cm has an extremely hard MicroCarbide powder steel MC66 core for excellent cutting edge retention and sharpness. Santoku is the best-selling Japanese blade shape and the name translates as "Three Virtues", these being meat, fish and vegetables. The flat cutting edge lends itself to a chopping motion rather than the rocking cutting movement of European chef's knives. The blade core is surrounded by 132 outer layers of steel which make up the unique Damascus-design pattern on the blade. The black Ash wood handle sits comfortably in the hand, allowing firm control and tireless working. It's recommended to hand wash only, maintain and sharpen on a whetstone and using glass, ceramic or stone cutting boards should be avoided. Rockwell hardness of approximately 66. Zwilling Miyabi 5000MCD 67 Japanese santoku knife made in Japan.
362,10 €

Sold out

Sold out
Couteau Japonais Ittetsu Honesuki Black Pakka wood 15cm IWY-9009
Honesuki knife from Ittetsu with 15 cm blade. The blade is made of stainless Sandvik 19C27 steel. Handle is black pakka wood. Honesuki is specifically designed for de-boning and breaking down poultry, but many people have found the knife is also capable of filleting fish and red meat, or carrying out many of the tasks. Ittetsu knives are handmade in Echizen city, Japan. Do not attempt to cut, hit or chop frozen products or bones. The blade can chip or break. Hand wash with warm water and towel dry. 
95,97 €

Sold out

Sold out
Sujihiki Couteau Japonais Ittetsu Black Pakka wood 27cm IWY-9008
Sujihiki slicing knife from Ittetsu with 27 cm blade. The blade is made of stainless Sandvik 19C27 steel. Handle is black pakka wood. Ittetsu knives are handmade in Echizen city, Japan. Do not attempt to cut, hit or chop frozen products or bones. The blade can chip or break. Hand wash with warm water and towel dry. 
129,03 €

Sold out

Sold out
Nakiri Couteau Japonais Kenshiro Hatono VG10 Nickel Damascus, paper 21cm KH-P8
This japanese nakiri knife is handmade by Kenshiro Hatono. Blade 210 mm made of nickel damascus steel with VG10 core. Traditional handle made of japanese paper with lacquer. Nakiri knife is a classic Japanese style knife with a straight, symmetrical flat edge blade shape that is most commonly used for slicing, dicing, mincing, and chopping vegetables. Kenshiro Hatono is a talanted knife maker. Currently he is working in Takefu knife village. This Japanese handmade knife is not allowed to cut, hit or chop frozen products or bones. The blade can chip or break. Hand wash with warm water and towel dry.
225,00 €

Sold out

Sold out
Kiritsuke Couteau Japonais Kenshiro Hatono VG10 Nickel Damascus, paper 21cm KH-P6
This japanese kiritsuke kitchen knife is handmade by Kenshiro Hatono. Blade 210 mm made of nickel damascus steel with VG10 core. Traditional handle made of japanese paper with lacquer. Kenshiro Hatono is a talanted knife maker. Currently he is working in Takefu knife village. This Japanese handmade knife is not allowed to cut, hit or chop frozen products or bones. The blade can chip or break. Hand wash with warm water and towel dry.
217,74 €

Sold out

Sold out
Kiritsuke Couteau Japonais Kenshiro Hatono VG10 Nickel Damascus 21cm KH-C3
Kiritsuke kitchen knife handmade by Kenshiro Hatono. Blade 210 mm made of nickel damascus steel with VG10 core. Traditional handle made of cloth with lacquer. Kenshiro Hatono is a talanted knife maker. Currently he is working in Takefu knife village. This Japanese handmade knife is not allowed to cut, hit or chop frozen products or bones. The blade can chip or break. Hand wash with warm water and towel dry.
217,74 €

Sold out

Sold out
Couteau Japonais Kenshiro Hatono Bunka VG10 Nickel Damascus 16.5cm KH-C1
Japanese bunka kitchen knife handmade by Kenshiro Hatono. Blade 165 mm made of nickel damascus steel with VG10 core. Traditional handle made of cloth with lacquer. Kenshiro Hatono is a talanted knife maker. Currently he is working in Takefu knife village. This Japanese handmade knife is not allowed to cut, hit or chop frozen products or bones. The blade can chip or break. Hand wash with warm water and towel dry.
193,55 €

Sold out

Sold out
Santoku Couteau Japonais Kenshiro Hatono VG10 Damascus, Japanese lacquer 17cm KH-A
Japanese santoku knife handmade by Kenshiro Hatono. Blade 170 mm made of damascus steel with VG10 core. Japanese lacquer handle. Kenshiro Hatono is a talanted knife maker. Currently he is working in Takefu knife village. This Japanese handmade knife is not allowed to cut, hit or chop frozen products or bones. The blade can chip or break. Hand wash with warm water and towel dry.
152,42 €

Sold out

Sold out
Santoku Couteau Japonais Zwilling J.A.Henckels Twin Fin II 17cm 30917-161-0
Japanese knife Santoku from the Zwilling Twin Fin II series with a blade length of 17 cm is very versatile. This knife combines innovative design with traditional craftsmanship. The result is an unusual knife that will appeal to both amateur and professional chefs. At first glance and for many years to come. Santoku literally means "three advantages", but this utility knife offers much more. This high-quality chef's knife is forged from N60 stainless steel, which features a special blend of chromium and carbon. It fits comfortably in your hand and handles a wide variety of tasks. It can be used to easily cut vegetables, meat and fish. The ergonomically shaped handle makes it easier to work with the Japanese knife, and the decorative gills give the knife a special look. The ice-hardened blade of this kitchen knife is durable and flexible.
79,84 €

Sold out

Sold out
Sujihiki Couteau Japonais Tsutomu Kajiwara 27cm TK-1128
Japanese kitchen knife sujihiki handmade by Tsutomu Kajiwara. Blade 27 cm is made of Aogami 2 steel with iron damascus clad. Traditional japanese wooden handle. The Sujihiki is a double edge slicing knife with a long narrow blade that smoothly slices through meat or vegetables and preserves the integrity of each ingredient's freshness. The Sujihiki slicer can carve and fabricate large roasts and other meats and fish, and can be used for thinly slicing other ingredients. Please, use your Tsutomu Kajiwara knife carefully. It is not recommended for such knives - to wash in dishwasher, to leave it in water, to clean by acid liquids, to cut acid fruits like lemon. Hand-dry your knife.
201,61 €

Sold out

Sold out
Couteau Japonais Ittetsu Bunka 17cm IS-49
Ittetsu  Bunka knife with 170 mm blade. This all-purpose blade is suitable for cutting fruits, vegetables, fish, meat and more. Blade is made of SLD steel by Hitachi. SLD is a cold work die steel with high abrasion resistance for general use, excellent harden-ability and minimal quench stress. Handle: ashtree / quince. Ittetsu knives are handmade in Echizen city, Japan. Hand wash with warm water and towel dry. 
128,23 €

Sold out