Filtra per
Prezzo
€ €
Produttori
Lunghezza lama, mm
Paese
Acciaio
Maniglia
Collezione
Durezza
Filtro
Yanagiba Coltello da cucina giapponese Ittetsu Uraoshi Stamped Shirogami 2 IJS-11124 24cm
Sold out
Yanagiba Coltello da cucina giapponese Ittetsu Uraoshi Stamped Shirogami 2 24cm IJS-11124
The japanese knife Ittetsu Uraoshi Yanagiba IJS-11124 with 240mm blade. Polished blade is made of Shirogami #2 carbon steel. Handle is made from magnolia and has good water resistance. This knife has a bevel on only one side of the blade, to help achieve even slices. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.
79,03 €

Sold out

Coltello da cucina giapponese Ittetsu Uraoshi Usuba Stamped IJS-11143 21cm
Sold out
Coltello da cucina giapponese Ittetsu Uraoshi Usuba Stamped 21cm IJS-11143
Designed specifically for cutting vegetables the Japanese kitchen knife Ittetsu Uraoshi Usuba. This 21 cm polished blade is made of Shirogami #2 carbon steel. The oval shaped handle is made of magnolia wood. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.
137,10 €

Sold out

Petty Coltello da cucina giapponese Mcusta Zanmai Forest HBG-6001M 12cm
Sold out
Petty Coltello da cucina giapponese Mcusta Zanmai Forest 12cm HBG-6001M
Japanese kitchen knife Mcusta Zanmai Forest Petty with 120 mm blade. Mcusta Zanmai Forest Molybdenum Series is a great introduction to high quality Japanese knives. For this series, Zanmai forges each blade using Molybdenum Vanadium 8A steel and sharpens them utilizing Zanmai's famous Hamaguri V-Cut form. This grinding method results in incredibly sharp knives that are easy to use and maintain. The handle’s end caps are mirror finished and provide additional balance. The beautiful green micarta hangles are triple-riveted to complete this professional quality knife at an affordable price.
66,94 €

Sold out

Santoku Coltello da cucina giapponese Yu Kurosaki Fujin VG10 Damascus Wenge ZVD-165SAW 16.5cm
Sold out
Santoku Coltello da cucina giapponese Yu Kurosaki Fujin VG10 Damascus Wenge 16.5cm ZVD-165SAW
Yu Kurosaki Santoku knife with wenge wood handle. Yu Kurosaki Fujin series fearture Nickel Damascus-patterned blades with a core of VG-10 stainless steel for professional with a hardness of 60-61 HRC, which provides excellent rust resistance and a long-lasting edge as well as its beautifulness. The blade surface has Damascus and unique hammered FUJIN texture which causes an image of a Japanese god believed to control the wind. The handle of Santoku Fujin VG10 Damascus Series is made of Octagonal-shaped wenge wood. Handmade by Mr. Yu Kurosaki. Yu Kurosaki works in Takefu Knife Village where he apprenticed with Hiroshi Kato.
215,32 €

Sold out

Petty Coltello da cucina giapponese Mcusta Zanmai Forest HBG-6002M 15cm
Sold out
Petty Coltello da cucina giapponese Mcusta Zanmai Forest 15cm HBG-6002M
Mcusta Zanmai Forest Petty knife with 150 mm blade. Mcusta Zanmai Forest Molybdenum Series is a great introduction to high quality Japanese knives. For this series, Zanmai forges each blade using Molybdenum Vanadium 8A steel and sharpens them utilizing Zanmai's famous Hamaguri V-Cut form. This grinding method results in incredibly sharp knives that are easy to use and maintain. The handle’s end caps are mirror finished and provide additional balance. The beautiful green micarta handles are triple-riveted to complete this professional quality knife at an affordable price.
71,77 €

Sold out

Nakiri Coltello da cucina giapponese Mcusta Zanmai Ultimate Unkai ZUU-1108D 16.5cm
Sold out
Nakiri Coltello da cucina giapponese Mcusta Zanmai Ultimate Unkai 16.5cm ZUU-1108D
Mcusta Zanmai Ultimate Unkai  Nakiri vegetable knife. Blade lenght is 165 mm. The blade of Mcusta Zanmai Ultimate Unkai  nakiri knife is made of of Damascus steel (VG-10), 33 layers. The handle is made of pakka wood with mosaic pin. MyGoodKnife is an authorized dealer of Marusho Industry Inc (brand Mcusta Zanmai). All Mcusta knives at our stores are original and made is Seki city, Japan. Check our video to see interview with Mr.Tomohiro Hasegawa - president of Marusho Industry Inc (brand Mcusta Zanmai). Interview was made when Mr.Tomohiro visited or store in Helsinki.
258,06 €

Sold out

Kiritsuke Coltello da cucina giapponese Sukenari ZDP-189 Light Bocote S-148 24cm
Sold out
Kiritsuke Coltello da cucina giapponese Sukenari ZDP-189 Light Bocote 24cm S-148
Kiritsuke knife Sukenari with 24 cm blade. The blade is made of powder tool steel ZDP-189 (3 layers). ZDP-189 is high-end stainless steel produced by the Japanese HITACHI company using the PM process.  It contains high volumes of carbon and content and has reputation for being one of the hardest steels you can find in the knife industry. It’s also well-known for its razor-sharp edge, great wear and corrosion resistance, and great durability. This knife has a unique natural wooden texture of octagonal Bocote wood handle, which has a buffalo horn ferrule. This Sukenari japanese chef knife is not allowed to wash by dishwasher. Japanese kitchen knives have very hard, but thin blade. It is not allowed to cut by japanese chef knives bones and meat with bones, coconuts and other nuts, other hard products. 
402,42 €

Sold out

Kiritsuke Coltello da cucina giapponese Sukenari ZDP-189 Light Bocote S-147 21cm
Sold out
Kiritsuke Coltello da cucina giapponese Sukenari ZDP-189 Light Bocote 21cm S-147
Kiritsuke Japanese kitchen knife Sukenari ZDP-189 Light Bocote S-147 with blade lenght is 210 mm. This knife has a unique natural wooden texture of octagonal Bocote wood handle, which has a buffalo horn ferrule. The blade is made of powder tool steel ZDP-189 (3 layers). ZDP-189 is high-end stainless steel produced by the Japanese HITACHI company using the PM process.  It contains high volumes of carbon and content and has reputation for being one of the hardest steels you can find in the knife industry. It’s also well-known for its razor-sharp edge, great wear and corrosion resistance, and great durability. This Sukenari japanese knife is not allowed to wash by dishwasher. Japanese kitchen knives have very hard, but thin blade. It is not allowed to cut by japanese chef knives bones and meat with bones, coconuts and other nuts, other hard products. 
383,06 €

Sold out

Kiritsuke Coltello da cucina giapponese Sukenari ZDP-189 Bocote S-127 21cm
Sold out
Kiritsuke Coltello da cucina giapponese Sukenari ZDP-189 Bocote 21cm S-127
The kiritsuke Japanese kitchen knife Sukenari ZDP-189 Bocote S-127. Blade lenght is 210 mm. The blade is made of powder tool steel ZDP-189 (3 layers). ZDP-189 is high-end stainless steel produced by the Japanese HITACHI company using the PM process.  It contains high volumes of carbon and content and has reputation for being one of the hardest steels you can find in the knife industry. It’s also well-known for its razor-sharp edge, great wear and corrosion resistance, and great durability. This knife has a unique natural wooden texture of octagonal Bocote wood handle, which has a buffalo horn ferrule. This Sukenari japanese knife is not allowed to wash by dishwasher. Japanese kitchen knives have very hard, but thin blade. It is not allowed to cut by japanese  knives bones and meat with bones, coconuts and other nuts, other hard products. 
383,06 €

Sold out

Gyuto (coltello da chef) Coltello da cucina giapponese Yu Kurosaki VG10 Forged Color Damascus ZVCD-240CHR 24cm
Sold out
Gyuto (coltello da chef) Coltello da cucina giapponese Yu Kurosaki VG10 Forged Color Damascus 24cm ZVCD-240CHR
This Gyuto kitchen knife handcrafted by the Japanese craftsman Yu Kurosaki. The blade length is 24 cm. High quality materials and age old forging techniques combine to create a knife with an extremely sharp edge that will hold up throughout use. Crafted with a beautiful design using core steel VG10 forged colored damascus (polished). Handle is made of padouk. 
346,77 €

Sold out

Kiritsuke Coltello da cucina giapponese Sukenari 3 layers HAP-40 S-3112 27cm
Sold out
Kiritsuke Coltello da cucina giapponese Sukenari 3 layers HAP-40 27cm S-3112
Sukenari kiritsuke knife S-3112. Blade length is 270 mm. Traditional Japanese octagonal magnolia handle. Blade of kiritsuke knife Sukenari is made of HAP-40 steel (3 layers). This Sukenari kiritsuke japanese knife is not allowed to wash by dishwasher. Japanese kitchen knives have very hard, but thin blade. It is not allowed to cut by japanese chef knives bones and meat with bones, coconuts and other nuts, other hard products. 
346,77 €

Sold out

Kiritsuke Coltello da cucina giapponese Sukenari 3 layers HAP 40 S-3111 24cm
Sold out
Kiritsuke Coltello da cucina giapponese Sukenari 3 layers HAP 40 24cm S-3111
Sukenari kiritsuke knife S-3111. Blade length is 240 mm. Traditional Japanese octagonal magnolia handle. Blade of kiritsuke knife Sukenari is made of HAP 40 steel (3 layers). This Sukenari kiritsuke japanese knife is not allowed to wash by dishwasher. Japanese kitchen knives have very hard, but thin blade. It is not allowed to cut by japanese chef knives bones and meat with bones, coconuts and other nuts, other hard products. 
306,45 €

Sold out

Coltello da cucina giapponese Hideo Kitaoka Honesuki Ao2 15cm
Sold out
Coltello da cucina giapponese Hideo Kitaoka Honesuki 15cm Ao2
Handmade honesuki knife by Mr. Hideo Kitaoka. Aogami steel with iron clad. Handle made of rosenwood. The Honesuki is a Japanese style boning knife. Originally designed for poultry. Hideo Kitaoka in Takefu, Fukui Province specializes in the production of high-quality single-edged kitchen knives. Please, use your carbon knives carefully. It is not recommended for such knives - to wash in dishwasher, to leave it in water, to clean by acid liquids, to cut acid fruits like lemon. Hand-dry your knife: This should be done immediately after washing with a clean dishtowel. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry.
193,55 €

Sold out

Yanagiba Coltello da cucina giapponese Ryusen Hamono Houenryu HE-308 27cm
Sold out
Yanagiba Coltello da cucina giapponese Ryusen Hamono Houenryu 27cm HE-308
Yanagiba Houenryu is an exclusive knife created by Ryusen Hamono to commemorate the opening of their impressive new factory and boutique in Echizen, Fukui Prefecture. The blade is completely made of Damascus steel, which consists of stainless VG-10 and VG-2. The backside of the knife is thinner than on most yanagi knives and gives a sharper edge to the touch and makes it easier to slide over fish. The handle is crafted from a solid piece of walnut wood with a mosaic pin on one side and the Ryusen logo on the other. The knife comes in a beautiful box.
2.580,65 €

Sold out

Gyuto (coltello da chef) Coltello da cucina giapponese Yu Kurosaki Shizuku R2 Keyaki ZR-210CH 21cm
Sold out
Gyuto (coltello da chef) Coltello da cucina giapponese Yu Kurosaki Shizuku R2 Keyaki 21cm ZR-210CH
Chef knife gyuto Yu Kurosaki Shizuku with 210 mm blade. This Yu Kurosaki series feartures R2 tsuchime-finish blades. Octagon handle is made of keyaki wood. Wash and dry with a soft sponge, and safely store after use. Avoid cutting into bones, frozen foods, hard fruit pits. Recommended cutting surface: wood, rubberized boards and high-end composites, and quality plastics such as polyethene make acceptable cutting surfaces, and will help protect and prolong knife’s edge. Avoid glass, metal, countertops, and other rigid, non-forgiving surfaces. Yu Kurosaki works in Takefu Knife Village.
294,35 €

Sold out

Bunka Coltello da cucina giapponese Yu Kurosaki Shizuku R2 Keyaki ZR-165BU 16.5cm
Sold out
Bunka Coltello da cucina giapponese Yu Kurosaki Shizuku R2 Keyaki 16.5cm ZR-165BU
Yu Kurosaki Shizuku Bunka knife with 165 mm blade.  This Yu Kurosaki series feartures R2 tsuchime-finish blades. This bunka knife has an incredible level of finish and polish, with Kurosaki's signature "Shizuku" Tsuchime patterns that are both aesthetically pleasing and functional. Octagon handle is made of keyaki wood. Wash and dry with a soft sponge, and safely store after use. Avoid cutting into bones, frozen foods, hard fruit pits. Recommended cutting surface: wood, rubberized boards and high-end composites, and quality plastics such as polyethene make acceptable cutting surfaces, and will help protect and prolong knife’s edge. Avoid glass, metal, countertops, and other rigid, non-forgiving surfaces. Yu Kurosaki works in Takefu Knife Village.
282,26 €

Sold out

Nakiri Coltello da cucina giapponese Ryusen Hamono Bonten Unryu BU-308 16.5cm
Sold out
Nakiri Coltello da cucina giapponese Ryusen Hamono Bonten Unryu 16.5cm BU-308
Nakiri knife Ryusen Hamono Bonten Unryu Wa with 16.5 cm blade. Nakiri is a classic Japanese-style knife that has a straight, symmetrical edge that is most commonly used for slicing, dicing, and chopping vegetables. The Bonten Unryu is one of the signature lines by Ryusen. It is considered as one of the best VG10 line by any Japanese maker, because of its unmatched artistics and more importantly, their VG10 blades are hande forged one-by-one. The blade of the Unryu wa series, is constructed identical as the western handle Unryu series. It has a core of VG-10, with 63 layers of stainless damascus steel. The blade is relatively thin, with a medium / light weight, but not as thin as a laser. Due to the classic Japanese perfectly shaped octagonal handle, it is easy to control and effortlessly will do exactly what it is made for cutting perfectly. The Rockwell hardness on this knife is around 60-62 HRC, for a durable edge. Ryusen Hamono Gyuto  knife goes in black gift box.
233,06 €

Sold out

Nakiri Coltello da cucina giapponese Ittetsu Shirogami Tall IW-11839 18cm
Sold out
Nakiri Coltello da cucina giapponese Ittetsu Shirogami Tall 18cm IW-11839
Japanese Tall Nakiri knife Ittetsu with 180 mm blade. Tall nakiris are longer and taller than a normal nakiri knife. This one is 65 mm tall.  This nakiri is made from 3 layers of material: iron clad and Shirogami steel. A layer of iron on each side protecting a layer of carbon steel at the core, in a process referred to as Sanmai or forge welding. Iron and carbon steel are both susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Avoid Bones, Frozen foods, nuts and hard candies or anything other than fruits, vegetables and proteins. Handle: waterproof mono octagonal walnut. Ittetsu knives are handmade in Echizen city, Japan. Hand wash with warm water and towel dry. 
144,35 €

Sold out

Bunka Japanese kitchen knife Ittetsu Shirogami IW-11835 18cm
Sold out
Bunka Coltello da cucina giapponese Ittetsu Shirogami 18cm IW-11835
Japanese bunka knife Ittetsu with 180 mm blade. This kitchen knife is made from 3 layers of material: iron clad and Shirogami steel. A layer of iron on each side protecting a layer of carbon steel at the core, in a process referred to as Sanmai or forge welding. Iron and carbon steel are both susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Avoid Bones, Frozen foods, nuts and hard candies or anything other than fruits, vegetables and proteins. Handle: waterproof mono octagonal walnut. Ittetsu knives are handmade in Echizen city, Japan. Hand wash with warm water and towel dry. 
136,29 €

Sold out

Nakiri Coltello da cucina giapponese Kenshiro Hatono VG10 Nickel Damascus, paper KH-P8 21cm
Sold out
Nakiri Coltello da cucina giapponese Kenshiro Hatono VG10 Nickel Damascus, paper 21cm KH-P8
This japanese nakiri knife is handmade by Kenshiro Hatono. Blade 210 mm made of nickel damascus steel with VG10 core. Traditional handle made of japanese paper with lacquer. Nakiri knife is a classic Japanese style knife with a straight, symmetrical flat edge blade shape that is most commonly used for slicing, dicing, mincing, and chopping vegetables. Kenshiro Hatono is a talanted knife maker. Currently he is working in Takefu knife village. This Japanese handmade knife is not allowed to cut, hit or chop frozen products or bones. The blade can chip or break. Hand wash with warm water and towel dry.
225,00 €

Sold out

Kiritsuke Coltello da cucina giapponese Kenshiro Hatono VG10 Nickel Damascus, paper KH-P6 21cm
Sold out
Kiritsuke Coltello da cucina giapponese Kenshiro Hatono VG10 Nickel Damascus, paper 21cm KH-P6
This japanese kiritsuke kitchen knife is handmade by Kenshiro Hatono. Blade 210 mm made of nickel damascus steel with VG10 core. Traditional handle made of japanese paper with lacquer. Kenshiro Hatono is a talanted knife maker. Currently he is working in Takefu knife village. This Japanese handmade knife is not allowed to cut, hit or chop frozen products or bones. The blade can chip or break. Hand wash with warm water and towel dry.
217,74 €

Sold out

Coltello da cucina giapponese Kenshiro Hatono Bunka VG10 Nickel Damascus, paper KH-P1 16.5cm
Sold out
Coltello da cucina giapponese Kenshiro Hatono Bunka VG10 Nickel Damascus, paper 16.5cm KH-P1
This bunka knife is handmade by Kenshiro Hatono. Blade 165 mm made of nickel damascus steel with VG10 core. Traditional handle made of japanese paper with lacquer. Kenshiro Hatono is a talanted knife maker. Currently he is working in Takefu knife village. This Japanese handmade knife is not allowed to cut, hit or chop frozen products or bones. The blade can chip or break. Hand wash with warm water and towel dry.
201,61 €

Sold out

Kiritsuke Coltello da cucina giapponese Kenshiro Hatono VG10 Nickel Damascus KH-C3 21cm
Sold out
Kiritsuke Coltello da cucina giapponese Kenshiro Hatono VG10 Nickel Damascus 21cm KH-C3
Kiritsuke kitchen knife handmade by Kenshiro Hatono. Blade 210 mm made of nickel damascus steel with VG10 core. Traditional handle made of cloth with lacquer. Kenshiro Hatono is a talanted knife maker. Currently he is working in Takefu knife village. This Japanese handmade knife is not allowed to cut, hit or chop frozen products or bones. The blade can chip or break. Hand wash with warm water and towel dry.
217,74 €

Sold out

Coltello da cucina giapponese Kenshiro Hatono Bunka VG10 Nickel Damascus KH-C1 16.5cm
Sold out
Coltello da cucina giapponese Kenshiro Hatono Bunka VG10 Nickel Damascus 16.5cm KH-C1
Japanese bunka kitchen knife handmade by Kenshiro Hatono. Blade 165 mm made of nickel damascus steel with VG10 core. Traditional handle made of cloth with lacquer. Kenshiro Hatono is a talanted knife maker. Currently he is working in Takefu knife village. This Japanese handmade knife is not allowed to cut, hit or chop frozen products or bones. The blade can chip or break. Hand wash with warm water and towel dry.
193,55 €

Sold out