Filter by
Price
€ €
Manufacturers
Blade Length, mm
Country
Steel
Handle
Collection
Hardness
Lock
Filter
Japanese kitchen knife Santoku Yu Kurosaki Fujin SG2 ZRF-165SAONWQ 16.5cm
Sold out
Santoku Japanese kitchen knife Yu Kurosaki Fujin R2 Oak 16.5cm ZRF-165SAONWQ
Santoku of special Fujin SG2 series by Yu Kurosaki. A functionally and aesthetically stunning Japanese knife. The octagonal handle is made this time of oak with a ring of natural turquoise. The blade with the unique Tsuchime forged pattern is crafted from three layers of SG2 stainless steel. In the manufacture of this series, Kurosaki was inspired by Fujin (Fujin) - the Shinto god of the wind, which can be seen in the forged pattern.
€266.13

Sold out

Blade Sukenari HAP40
Sold out
Blade Sukenari ZDP-189 27cm S-3N4
Blade 27 cm Sukenari HAP40 S/S Clad S-3N4 for Gyuto knife. Manufactured from three layers of steel (San Mai technique) with a cobalt alloyed HAP40 powder steel core with stainless steel clad. Total length is 410 mm. Stainless steel clads. Not allowed to wash by dishwasher. It is not allowed to cut by Japanese chef knives bones and meat with bones, coconuts and other nuts, other hard products. Weight is 350 g.
€290.32

Sold out

Japanese kitchen knife Gyuto Ittetsu VG-10 Damascus IWZ-104 21cm
Sold out
Gyuto Japanese kitchen knife Ittetsu VG-10 Damascus 21cm IWZ-104
An excellent knife Gyuto IWZ-104 from Ittetsu with a blade length of 21 cm for chopping and slicing fish, meat, vegetables and fruits. The blade is made of high quality VG10 Damascus steel, hammer finish. The octagonal handle is made of pakkawood wood. This knife cannot be washed in the dishwasher. Hand wash with warm water and towel dry. Japanese kitchen knives have a very hard but thin blade. Japanese knives are not allowed to cut bones and meat with bones, coconuts and other nuts, and other hard foods. Ittetsu knives due to handmade may differ slightly from those shown in the photos and sizes. Echizen city, Japan. Weight 250 gr.
€129.03

Sold out

Santoku Japanese kitchen knife Miyabi 5000FCD 34684-181-0 18cm - 1
Sold out
Santoku Japanese kitchen knife Miyabi 5000FCD RAW 18cm 34684-181-0
MIYABI 5000 FCD Santoku, 18cm blade length. This Japanese santoku has a hard fine carbide steel core for very good cutting edge retention and sharpness. Santoku translates as "Three Virtues", these being meat, fish and vegetables. The flat cutting edge lends itself to a chopping motion rather than the rocking cutting movement of European chef's knives. The blade core is surrounded by 48 outer layers of steel which make up the unique Damascus-design pattern on the blade. The cutting edge is Honbazuke-honed and symmetrical (not single bevel), so can be used by those both right and left-handed. There is no finger guard so the whole length of the cutting edge can be used. The handle and half-bolster join seamlessly for comfortable use. The smooth surface helps to prevent the formation of calluses on the thumb and forefinger. Hand wash only for best care, and maintain and sharpen using a whetstone. We’d recommend using a wooden chopping board rather than glass, ceramic or stone boards as these will dull the cutting edge. - FC61 fine carbide steel blade core; - 48 layers of steel surrounding the core create the Damascus-design; - FRIODUR ice-hardened for extreme hardness; - Rockwell hardness of approximately 61; - Symmetrical cutting edge; - Pakka wood handle; - Steel mosaic pin and handle end cap; - Made in Japan.
€206.45

Sold out

Chef knife Miyabi 5000MCD 67 Gyutoh 34401-201-0 20cm - 1
Sold out
Gyuto Japanese kitchen knife Miyabi 5000MCD 67 20cm 34401-201-0
Zwilling Miyabi 5000MCD 67 japanese gyutoh or chef's knife has a MicroCarbide powder steel MC66 core which gives extremely good sharpness and cutting edge retention. The blade has 132 outer layers of steel which surround the core and make up the unique Damascus-design pattern on the blade. The cutting edge is Honbazuke-honed and symmetrical (not single bevel), so can be used by those both right and left-handed. There is no finger guard so the whole length of the cutting edge can be used. The black Ash wood handle sits comfortably in the hand, allowing firm control and tireless working. It's recommended to hand wash only, maintain and sharpen on a whetstone and using glass, ceramic or stone cutting boards should be avoided. Rockwell hardness of approximately 66. Zwilling Miyabi 5000MCD 67 gyotoh chef's knife made in Japan.
€362.10

Sold out

Blade Sukenari ZDP-189 S-1N7 21cm
Sold out
Blade Sukenari ZDP-189 Light Bocote 21cm S-1N7
Sukenari blade for kiritsuke knife. Made of ZDP-189 steel. Weight is 190 g. Total length is 315 mm. Stainless steel clads. Not allowed to wash by dishwasher. It is not allowed to cut by Japanese chef knives bones and meat with bones, coconuts and other nuts, other hard products. 
€266.13

Sold out

Japanese kitchen knife Nakiri Yoshimi Kato Petty Aogami Super
Sold out
Nakiri Japanese kitchen knife Yoshimi Kato Petty Aogami Super S/S clad Cherry 16.5cm D-902
Nakiri knife made by Yoshimi Kato. Blade is made of Aogami Super steel with stainless steel clad. Blade length 165 mm. Weight 265 g. Handle – cherrywood. Recommended only hand wash with warm water and towel dry. Avoid bones, frozen foods, nuts and hard candies or anything other than fruits, vegetables and proteins.
€216.94

Sold out

Japanese kitchen knife Bunka Yu Kurosaki Fujin VG10 Damascus ZVD-165BUOWQ 16.5cm
Sold out
Bunka Japanese kitchen knife Yu Kurosaki Fujin VG10 Damascus 16.5cm ZVD-165BUOWQ
Yu Kurosaki Bunka knife with Nickel Damascus-patterned blade with a core of VG-10 stainless steel. Hardness of 60-61 HRC provides excellent rust resistance and a long-lasting edge as well as its beautifulness. The blade surface has Damascus and unique hammered FUJIN texture which causes an image of a Japanese god believed to control the wind. The handle of Bunka Fujin VG10 Damascus Series is made of oak and water-resistant wenge wood, which are separated from each other by a ring of natural turquoise. Yu Kurosaki works in Takefu Knife Village where he apprenticed with Hiroshi Kato.
€290.32

Sold out

Gyuto Japanese kitchen knife Yoshimi Kato Aogami super D-505 21cm
Sold out
Gyuto Japanese kitchen knife Yoshimi Kato Aogami super 21cm D-505
Japanese chef knife gyuto is hand forged by Yoshimi Kato, who is a certified traditional craftsman in Takefu, Fukui prefecture in Japan. Blade is made from 3 layers with Aogami carbon steel core. Blade length 210 mm. Handle – cherrywood. Hand wash with warm water and towel dry. Avoid bones, frozen foods, nuts and hard candies.
€241.13

Sold out

Japanese kitchen knife Nakiri Yu Kurosaki Fujin VG10 Damascus ZVD-165NAOWQ 16.5cm
Sold out
Nakiri Japanese kitchen knife Yu Kurosaki Fujin VG10 Damascus 16.5cm ZVD-165NAOWQ
Yu Kurosaki Fujin series nakiri with Nickel Damascus-patterned blades with a core of VG-10 stainless steel. Hardness of 60-61 HRC provides excellent rust resistance and a long-lasting edge as well as its beautifulness. The blade surface has Damascus and unique hammered FUJIN texture which causes an image of a Japanese god believed to control the wind. The handle of Nakiri Fujin VG10 Damascus Series is made of oak and water-resistant wenge wood, which are separated from each other by a ring of natural turquoise. Yu Kurosaki works in Takefu Knife Village where he apprenticed with Hiroshi Kato.
€290.32

Sold out

Japanese kitchen knife Tojiro Zen Black for vegetables FD-1561 9cm
Sold out
Japanese kitchen knife Tojiro Zen Black for vegetables 9cm FD-1561
Tojiro Zen Black paring knife with 90 mm blade. VG10 as core steel, clad by 13-chrome stainless steel, it has achieved both professional sharpness and easy maintenance. Black oxide processing, which is the technology often used for medical equipment, has been applied on blade. The blade thus has both outstanding corrosion resistance and beautiful visual aspect. Tojiro Zen Black paring knife FD-1561 weights 40 g. Chestnut handle has excellent durability, and additionally applied fire treatment on surface makes it even stronger. Tojiro Zen Black paring knife FD-1561 is not allowed to wash by dishwasher. It has very hard, but thin blade and not allowed to cut bones and meat with bones, coconuts and other nuts, other hard products.
€56.45

Sold out

Kiritsuke Japanese kitchen knife Seki Kanetsugu Zuiun 9305 21cm
Sold out
Kiritsuke Japanese kitchen knife Seki Kanetsugu Zuiun 21cm 9305
Seki Kanetsugu Zuiun Kiritsuke 21 cm. Kiritsuke bocho combines the qualities of “usu-ba” (thin-bladed) and “yanagi-ba” (thin- and long-bladed) knives. But it is crafted to be double edged as opposed to conventional single-edged ones, making it suitable for cutting any type of food by bringing the blade straight down onto the item. As the pointed part of the blade is modeled after a sword, it is also suitable for preparing dishes that involve techniques requiring the use of the tip, such as decorative cutting.The Zuiun is a special model manufactured to celebrate the company's centennial. Seki Kanetsugu Zuiun knives have blades with a wavy “hamon” pattern similar to Japanese swords. In its current incarnation, Seki Kanetsugu Cutlery has been making modern blades that realize the characteristics of Japanese swords--unbreakable, unbending and very sharp. The company also infused the Zuiun with the spirit of such swords. The blade is made of Damascus steel that uses powdered stainless steel SPG2 for the core material. Finely sharpened by artisans, the surface of the blade features a scudding cloud-like pattern. It is also forged into a V-shaped "hamaguri-ba" clam blade, reflecting a characteristic of Japanese swords.
€229.84

Sold out

Utility kitchen knife Seki Kanetsugu Zuiun Petty 9302 15cm
Sold out
Utility kitchen knife Seki Kanetsugu Zuiun Petty 15cm 9302
Seki Kanetsugu Zuiun Petty knife 15 cm. The Zuiun is a special model manufactured to celebrate the company's centennial. Seki Kanetsugu Zuiun knives have blades with a wavy “hamon” pattern similar to Japanese swords. In its current incarnation, Seki Kanetsugu Cutlery has been making modern blades that realize the characteristics of Japanese swords--unbreakable, unbending and very sharp. The company also infused the Zuiun with the spirit of such swords. The blade is made of Damascus steel that uses powdered stainless steel SPG2 for the core material. Finely sharpened by artisans, the surface of the blade features a scudding cloud-like pattern. It is also forged into a V-shaped "hamaguri-ba" clam blade, reflecting a characteristic of Japanese swords.
€169.35

Sold out

Bunka Japanese kitchen knife Tsutomu Kajiwara TK-1121BGA 21cm
Sold out
Bunka Japanese kitchen knife Tsutomu Kajiwara 21cm TK-1121BGA
Bunka knife handmade by Tsutomu Kajiwara. Blade 210 mm is made of Aogami 2 steel with iron damascus clad. Traditional handle is made of bocote wood with God’s ash ferrule. Please, use your Tsutomu Kajiwara knife carefully. It is not recommended for such knives - to wash in dishwasher, to leave it in water, to clean by acid liquids, to cut acid fruits like lemon. Hand-dry your knife: This should be done immediately after washing with a clean dishtowel. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry.
€189.52

Sold out

Nakiri Japanese kitchen knife Yu Kurosaki Raijin Forged Cobalt ZCS-165NAOWQ 16.5cm
Sold out
Nakiri Japanese kitchen knife Yu Kurosaki Raijin Forged Cobalt 16.5cm ZCS-165NAOWQ
Yu Kurosaki Raijin nakiri knife with 165 mm blade. The Nakiri is a double bevel edged knife is used as a vegetable slicer. The handle is made this time of oak and water-resistant wenge wood, which are separated from each other by a ring of natural turquoise. Raijin, the Japanese god of thunder is the inspiration Kurosaki-san used for the hand hammered pattern on these blades; evoking a "crack!" of lightning. Folds of Damascus steel play in contrast with that unique texture creating a stunning look. With a core of high quality Cobalt Special Steel that is able to take and hold an extremely sharp edge. Cobalt Special is registered trademark of Takefu Special Steel Co Ltd. It is super high grade steel, it containing lots of cobalt.
€282.26

Sold out

Petty Japanese kitchen knife Yu Kurosaki Raijin Forged Cobalt ZCS-120PEOWQ 12cm
Sold out
Petty Japanese kitchen knife Yu Kurosaki Raijin Forged Cobalt 12cm ZCS-120PEOWQ
Handcrafted by Yu Kurosaki petty knife Raijin. The blade length is 12 cm. The octagonal handle is made this time of oak and water-resistant wenge wood, which are separated from each other by a ring of natural turquoise. Raijin, the Japanese god of thunder is the inspiration Kurosaki-san used for the hand hammered pattern on these blades; evoking a "crack!" of lightning. Folds of steel play in contrast with that unique texture creating a stunning look. With a core of high quality Cobalt Special Steel that is able to take and hold an extremely sharp edge. Cobalt Special is registered trademark of Takefu Special Steel Co Ltd. It is super high grade steel, it containing lots of cobalt. The edge retention and the sharpness are better than VG10 which has good reputation in the world. Handle is made of oak, turquoise ring.  
€250.00

Sold out

Kiritsuke Japanese kitchen knife Hideo Kitaoka Shirogami CN-2216 24cm
Sold out
Kiritsuke Japanese kitchen knife Hideo Kitaoka Shirogami 24cm CN-2216
Handmade single-beveled kiritsuke knife by Mr. Hideo Kitaoka. 24 cm blade is made of carbon steel with Shirogami steel core Handle made of a natural pakkawood.  Hideo Kitaoka in Takefu, Fukui Province specializes in the production of high-quality single-edged kitchen knives. Please, use your carbon knives carefully. It is not recommended for such knives - to wash in dishwasher, to leave it in water, to clean by acid liquids, to cut acid fruits like lemon. Hand-dry your knife: This should be done immediately after washing with a clean dishtowel. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry.
€177.42

Sold out

Gyuto Japanese kitchen knife Yu Kurosaki Raijin Forged Cobalt ZCS-240CH 24cm
Sold out
Gyuto Japanese kitchen knife Yu Kurosaki Raijin Forged Cobalt 24cm ZCS-240CHOWQ
 This Japanese chef knife Gyuto Raijin Forget Cobalt special series is handcrafted by the Japanese craftsman Yu Kurosaki.  The blade length is 24 cm. Raijin, the Japanese god of thunder is the inspiration Kurosaki-san used for the hand hammered pattern on these blades; evoking a "crack!" of lightning. Folds of Damascus steel play in contrast with that unique texture creating a stunning look. With a core of high quality Cobalt Special Steel that is able to take and hold an extremely sharp edge. Cobalt Special is registered trademark of Takefu Special Steel Co Ltd. It is super high grade steel, it containing lots of cobalt. The edge retention and the sharpness are better than VG10 which has good reputation in the world. Handle is made of oak, turquoise ring.  
€346.77

Sold out

Nakiri Japanese kitchen knife Tsutomu Kajiwara TK-1117 16.5cm
Sold out
Nakiri Japanese kitchen knife Tsutomu Kajiwara 16.5cm TK-1117
Nakiri knife handmade by Tsutomu Kajiwara. Blade 165 mm is made of Aogami 2 steel with iron damascus clad. Traditional japanese wooden handle. Please, use your Tsutomu Kajiwara knife carefully. It is not recommended for such knives - to wash in dishwasher, to leave it in water, to clean by acid liquids, to cut acid fruits like lemon. Hand-dry your knife: This should be done immediately after washing with a clean dishtowel. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry.
€181.45

Sold out

Japanese kitchen knife Ittetsu Tadafusa OEM Honesuki Aogami 2 ISW-06 15cm
Sold out
Japanese kitchen knife Ittetsu Tadafusa OEM Honesuki Aogami 2 15cm ISW-06
Ittetsu Honesuki Tadafusa knife with 15 cm blade. Honesuki is specifically designed for de-boning and breaking down poultry, but is also capable of filleting fish or meat and carrying out many tasks. Blade is made of Aogami 2 steel. This is very similar to white paper steel but with tungsten and chromium added to it which helps with edge retention and slows down rusting. The steel has then been hardened to 62-63 Rockwell and wrapped in stainless steel to further ease maintenance. Handle is made of walnut. Ittetsu knives are handmade in Echizen city, Japan. Hand wash with warm water and towel dry. 
€120.16

Sold out

Santoku Japanese kitchen knife Miyabi 8000DP Hibana Rocking 54488-181-0 18cm
Sold out
Santoku Japanese kitchen knife Miyabi 800DP Hibana Rocking 18cm 54488-181-0
The Miyabi 800DP Hibana Rocking 54488-181-0 supports Western circular motion and Asian chopping. The versatile blade is ideal for chopping vegetables, slicing through meats and preparing fish. Sleek black and brass spacers on the handle add to the beauty and weight that promotes sturdiness in hand and maneuverability at the tip. The MIYABI Hibana collection features a beautiful 49-layer Spark Damascus pattern on the blade that both strengthens and protects the core of FC61 steel. FRIODURx2 hardening improves the microstructure of the steel for improved cutting performance, corrosion resistance and durability. It's recommended to hand wash only, maintain and sharpen on a whetstone and using glass, ceramic or stone cutting boards should be avoided. Handcrafted in Seki, Japan.
€225.00

Sold out

Nakiri Japanese kitchen knife Zwilling J.A.Henckels Twin Fin II 30925-171-0 16.5cm
Sold out
Nakiri Japanese kitchen knife Zwilling J.A.Henckels Twin Fin II 16.5cm 30925-171-0
Comfortable nakiri Japanese kitchen knife Zwilling J.A.Henckels Twin Fin II 30925-171-0 is suitabl for chopping vegetables. The curved bolster acts as an extension of the hand and the ergonomic steel handle with gilled design is hygienic and exceptionally well balanced, promoting fatigue-free cutting even for the largest chopping tasksWith a FRIODUR ice-hardened blade made of Nitro 60 special formula stainless steel, these knives boast long-lasting durability. Made in Seki, Japan. Dishwasher safe.
€87.90

Sold out

Sujihiki Japanese kitchen knife Zwilling J.A.Henckels Twin Fin II 30910-231-0 23cm
Sold out
Sujihiki Japanese kitchen knife Zwilling J.A.Henckels Twin Fin II 23cm 30910-231-0
Exceptionally comfortable kitchen knife Zwilling J.A.Henckels Twin Fin II 30910-231 with a long narrow blade that smoothly slices through meat or vegetables. With a FRIODUR ice-hardened blade made of Nitro 60 special formula stainless steel, these knives boast long-lasting durability. The curved bolster acts as an extension of the hand and the ergonomic steel handle with gilled design is hygienic and exceptionally well balanced, promoting fatigue-free cutting even for the largest chopping tasks. Made in Seki, Japan. Dishwasher safe.
€91.94

Sold out

Japanese kitchen knife Ittetsu Mioroshi Shirogami 2 IJF-11115 21cm
Sold out
Japanese kitchen knife Ittetsu Mioroshi Forge-welded 21cm IJF-11115
Japanese kitchen Ittetsu Mioroshi IJF-11115  knife with 210 mm forge-welded blade made of Shirogami #2 carbon steel. Mioroshi is perfectly suited to filleting and portioning fish, but it can also slice fish quite well. Mioroshi is a knife like a cross between a sashimi knife and a deba knife. The blade is long and is thicker than shobu but thinner than deba. The oval shaped handle is made of magnolia wood. The blade is single bevel. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Hand wash with warm water and towel dry. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry. Ittetsu knives are handmade in Echizen city, Japan.
€125.00

Sold out