Filtrer
Prix
€ €
Fabricants
Longueur des cordes, mm
Pays
Acier
Poignée
Série
Dureté
Verrouillage
Filtrer
Gyuto Couteau Japonais Yoshimi Kato Black Nickel Damascus D-612 21cm
Sold out
Gyuto Couteau Japonais Yoshimi Kato Black Nickel Damascus 21cm D-612
Japanese chef knife hand forged by Yoshimi Kato who is a certified traditional craftsman in Takefu, Fukui prefecture in Japan. Blade VG-10 Nickel Damascus, 65 layers with VG-10 core. Blade length 210 mm. Handle - red pakkawood. Do not attempt to cut, hit or chop frozen products or bones. The blade can chip or break. Hand wash with warm water and towel dry.
237,90 €

Sold out

Kiritsuke Couteau Japonais Tsutomu Kajiwara TK-1126 24cm
Sold out
Kiritsuke Couteau Japonais Tsutomu Kajiwara 24cm TK-1126
Japanese kiritsuke knife handmade by Tsutomu Kajiwara. Blade 24 cm is made of Aogami 2 steel with iron damascus clad. Traditional japanese wooden handle. Please, use your Tsutomu Kajiwara knife carefully. It is not recommended for such knives - to wash in dishwasher, to leave it in water, to clean by acid liquids, to cut acid fruits like lemon. Hand-dry your knife: This should be done immediately after washing with a clean dishtowel. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry.
197,58 €

Sold out

Santoku Couteau Japonais Yu Kurosaki Fujin R2 ZRF-165SA 16.5cm
Sold out
Santoku Couteau Japonais Yu Kurosaki Fujin R2 16.5cm ZRF-165SA
Fujin R2 Santoku est un excellent couteau santoku japonais polyvalent, esthétique et fonctionnel, fabriqué à la main par le maître Yu Kurosaki. La poignée octogonale est en bois de wengé résistant à l'eau et en minéral turquoise, séparés les uns des autres par un anneau en argent. La lame de 16,5 cm de long présente un motif Tsuchime martelé unique et est en acier R2 à trois couches. Lors de la réalisation de cette série, Kurosaki s'est inspiré de Fujin, le dieu shintoïste du vent, que l'on peut voir dans le motif forgé.
334,68 €

Sold out

Gyuto Couteau Japonais Ittetsu Aogami 2 ISN-01 21cm
Sold out
Gyuto Couteau Japonais Ittetsu Aogami 2 21cm ISN-01
Ittetsu gyuto chef knife with 21 cm blade. Blade is made of Aogami 2 steel. This is very similar to white paper steel but with tungsten and chromium added to it which helps with edge retention and slows down rusting. The steel has then been hardened to 62-63 Rockwell and wrapped in stainless steel to further ease maintenance. Handle is antibacterial bubinga. Ittetsu knives are handmade in Echizen city, Japan. Hand wash with warm water and towel dry. 
144,35 €

Sold out

Couteau Japonais Tsutomu Kajiwara Petty TK-1111 9cm
Sold out
Couteau Japonais Tsutomu Kajiwara Petty 9cm TK-1111
Handmade japanese kitchen Petty knife by Tsutomu Kajiwara. Blade 90 mm is made of Aogami 2 steel with iron damascus clad. Traditional japanese wooden handle. Weight 80 g.
Please, use your Tsutomu Kajiwara knife carefully. It is not recommended for such knives - to wash in dishwasher, to leave it in water, to clean by acid liquids, to cut acid fruits like lemon. Hand-dry your knife: This should be done immediately after washing with a clean dishtowel. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry.
116,94 €

Sold out

Santoku Couteau Japonais Yu Kurosaki SPG2 Damascus Turquoise ZTQ-165SA 16.5cm
Sold out
Santoku Couteau Japonais Yu Kurosaki SPG2 Damascus Turquoise 16.5cm ZTQ-165SA
Amazing Yu Kurosaki Fujin SPG2 Hammered Damascus Turquoise Kiritsuke Santoku knife, 16,5 cm. Crafted with a beautiful full tang design using SPG2 core steel and finished with a sensational Western shaped turquoise handle, this is a real collectors knife and very difficult to find due to the limited numbers made. Weight of Yu Kurosaki SPG2 Damascus Turquoise ZTQ-165SA is about 230 g. Handmade by Mr. Yu Kurosaki. Yu Kurosaki works in Takefu Knife Village where he apprenticed with Hiroshi Kato.
491,94 €

Sold out

Nakiri Japanese kitchen knife Yu Kurosaki Fujin Super Aogami ZAF-165NA 16.5cm
Sold out
Nakiri Couteau Japonais Yu Kurosaki Fujin Super Aogami 16.5cm ZAF-165NA
Couteau Nakiri Fujin Aogami Super series fabriqué à la main par M. Yu Kurosaki. Nakiri a un bord droit et symétrique qui est le plus couramment utilisé pour trancher, couper en dés et hacher les légumes. Revêtement en acier inoxydable. Poignée Padouk avec anneau turquoise. La longueur de la lame est de 16,5 cm. Le poids est d'environ 150 g. Kurosaki-san s'est inspiré de Fujin, le dieu du vent dans la mythologie japonaise pour la conception de ces couteaux. Il a fait un travail remarquable pour capturer l'essence du Dieu du vent dans la finition Tsuchime (martelée à la main) de ces couteaux.
213,71 €

Sold out

Gyuto Couteau Japonais TOJIRO F-1352 18cm
Sold out
Gyuto Couteau Japonais TOJIRO 18cm F-1352
New! Tojiro GAI Gyuto chef´s knife with 180 mm blade. New Tojiro GAI series is suitable for both professional and home use. Not only practical, it is design wise superior and unique. VG-10 premium Japanese knife steel is in the core, which forged by 37 layers low and high carbon stainless steel. The handle with uniquely designed rugged surface fixed by hex bolts. It is one of a kind. Series name “GAI” came from a Japanese word "armor", which is inspired by the handle. Weight of Tojiro GAI Gyuto F-1352 is 170 g.
Please, use your Tojiro knives carefully. It is not recommended for such knives - to wash in dishwasher, to leave it in water, to clean by acid liquids, to cut acid fruits like lemon. Hand-dry your knife: This should be done immediately after washing with a clean dishtowel. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry.
125,00 €

Sold out

Japanese kitchen knife Seki Kanetsugu Nami 4 pcs 9204 10cm - 1
Sold out
Couteau Japonais Seki Kanetsugu Nami 4 pcs 10cm 9204
Seki Kanetsugu Nami Steak knives 4 pcs of different colours.  Steak knives Nami are made of coreless Damascus (laminated material of VG2 and VG10), blending high-tech with swordsmith tradition, the highest quality comfort was born. Seki Kanetsugu uses  “ocean wave” motif which came from a traditional Japanese painting. The founder Kanetsugu began to make the Japanese swards in the 14th century at Mino. Now Seki Kanetsugu incorporates "Hamaguriha" which is the sectional shape of Japanese sword into kitchen knife, making knife that lasts sharpness. Seki Kanetsugu Nami Steak knives are not allowed to wash in dishwasher.  
321,77 €

Sold out

Nakiri Couteau Japonais Gihei Hamono Aogami 2 Iron clad GH-503 15cm
Sold out
Nakiri Couteau Japonais Gihei Hamono Aogami 2 Iron clad 15cm GH-503
Japanese kitchen knife azuma nakiri 150 mm by Gihei Hamono. Blade is made of Aogami 2 steel with iron clad. Aogami #2 by Hitachi sometimes called Blue Paper #2 since the steel is wrapped in blue paper. It has a very good edge sharpness and excellent edge retention. This Gihei Hamono Nakiri has a handle of baked magnolia. Never wash any Japanese knife in a dishwasher. This knife has a thin blade and should not be used on hard items such as bones or frozen foods.
120,97 €

Sold out

Gyuto Couteau Japonais Daisuke Nishida Shirogami DN-11213 21cm
Sold out
Gyuto Couteau Japonais Daisuke Nishida Shirogami 21cm DN-11213
Japanese chef knife gyuto is handmade by Daisuke Nishida. Blade length 210 mm. Blade of this chef knife is made of Shirogami carbon steel. The whole is complemented by a handle made  of cherry wood  finished  with a plastic cap. The structure is extremely light and the D-shaped  handle perfectly fits the hand. Weight is 203 g. This  knife is not allowed to wash by dishwasher. Japanese kitchen knives have very hard, but thin blade. It is not allowed to cut by Japanese chef knives bones and meat with bones, coconuts and other nuts, other hard products. Daisuke Nishida knives due to hand-made may slightly differ from the pictures and dimensions shown. 
152,42 €

Sold out

Gyuto Couteau Japonais Ryusen Hamono Blazen Wa BZ-405 18cm
Sold out
Gyuto Couteau Japonais Ryusen Hamono Blazen Wa 18cm BZ-405
Ryusen Hamono Blazen Wa chef knife with 18 cm blade and perfectly redesigned Japanese octagonal handle. Blazen series are constructed out of a core of SG-2, sandwiched between 2 layers of stainless steel. The beautiful lines of damascus steel on the blade end up in a higher positioned Nashiji finish. Esthetically intriguing and in combination with the thin blade, it also provides little resistance while cutting. The combination of handle, weight, balance and the extremely thin and sharp cutting edge give tremendous comfort while cutting.
250,00 €

Sold out

Nakiri Couteau Japonais Goko Hamono Shirogami S/S Clad GHO-004 16.5cm
Sold out
Nakiri Couteau Japonais Goko Hamono Shirogami S/S Clad 16.5cm GHO-004
Goko Hamono nakiri knife with is 16,5 cm blade. The nakiri featured here is a perfect example of their philosophy. Utilizing a core of white #1 steel with a stainless cladding, the Goko nakiri is made with a slightly asymmetric edge grind. The steel is hardened to 60 HRC. A lovely rustic finish and oak wood octagonal handle complete the package.
159,68 €

Sold out

Sujihiki Couteau Japonais Ryusen Hamono Bonten Unryu BU-309 27cm
Sold out
Sujihiki Couteau Japonais Ryusen Hamono Bonten Unryu 27cm BU-309
Sujihiki knife Ryusen Hamono Bonten Unryu Wa with 27 cm blade. The Sujihiki is a double edge slicing knife with a long narrow blade that smoothly slices through meat or vegetables. The Bonten Unryu is one of the signature lines by Ryusen. It is considered as one of the best VG10 line by any Japanese maker, because of its unmatched artistics and more importantly, their VG10 blades are hande forged one-by-one. The blade of the Unryu wa series, is constructed identical as the western handle Unryu series. It has a core of VG-10, with 63 layers of stainless damascus steel. The blade is relatively thin, with a medium / light weight, but not as thin as a laser. Due to the classic Japanese perfectly shaped octagonal handle, it is easy to control and effortlessly will do exactly what it is made for cutting perfectly. The Rockwell hardness on this knife is around 60-62 HRC, for a durable edge. Ryusen Hamono Gyuto  knife goes in black gift box.
374,19 €

Sold out

Gyuto Couteau Japonais Ryusen Hamono Bonten Unryu BU-303 24cm
Sold out
Gyuto Couteau Japonais Ryusen Hamono Bonten Unryu 24cm BU-303
The Bonten Unryu is one of the signature lines by Ryusen. It is considered as one of the best VG10 line by any Japanese maker, because of its unmatched artistics and more importantly, their VG10 blades are hande forged one-by-one. The blade of the Unryu wa series, is constructed identical as the western handle Unryu series. It has a core of VG-10, with 63 layers of stainless damascus steel. The blade is relatively thin, with a medium / light weight, but not as thin as a laser. Due to the classic Japanese perfectly shaped octagonal handle, it is easy to control and effortlessly will do exactly what it is made for cutting perfectly. The Rockwell hardness on this knife is around 60-62 HRC, for a durable edge. Ryusen Hamono Gyuto  knife goes in black gift box.
290,32 €

Sold out

Gyuto Japanese kitchen knife Mcusta Classic Damascus HKC-3005D 21cm - 1
Sold out
Gyuto Couteau Japonais Mcusta Zanmai Classic Damascus 21cm HKC-3005D
Mcusta Zanmai Classic Gyuto, 21cm. The gyuto is a Japanese designed chef’s knife. Like the familiar western styled chef’s knife, gyutos are commonly tall at the heel, have a reasonably flat profile toward the heel for chopping, a belly toward the tip of the blade for rock cutting, and a pointed tip for precision work. The blade of Mcusta Zanmai Classic gyuto knife is coated with 33 layers of Damascus steel and has a VG-10 core. The handle is made from Corian, a composite material that consists of 2/3 natural minerals and 1/3 acrylic with pigment. Blade length: 21 cm
149,19 €

Sold out

Santoku Japanese kitchen knife Mcusta Classic Pro Zebra HFZ-8003D 18cm - 1
Sold out
Santoku Couteau Japonais Mcusta Zanmai Classic Pro Zebra 18cm HFZ-8003D
Mcusta Zanmai Classic Pro Zebra Santoku knife. Blade lenght is 18 cm. Santoku means 'Three Virtues' or 'To solve Three Problems'. The virtues or problems are slicing, dicing and mincing. The blade of Mcusta Zanmai Classic Pro Zebra santoku knife is made of of Damascus steel (VG-10), 33 layers. The handle is made of pakka wood with mosaic pin. MyGoodKnife is an authorized dealer of Marusho Industry Inc (brand Mcusta Zanmai). All Mcusta knives at our stores are original and made is Seki city, Japan. Check our video to see interview with Mr.Tomohiro Hasegawa - president of Marusho Industry Inc (brand Mcusta Zanmai). Interview was made when Mr.Tomohiro visited or store in Helsinki.
170,97 €

Sold out

Le set de couteaux Mcusta Zanmai Limited Edition White Tiger
Sold out
Le set de couteaux Mcusta Zanmai Limited Edition White Tiger
Exclusive Mcusta Zanmai Limited Edition White Tiger set, rainbow damascus with acrilyc and nickel silver handles. The company has developed a limited series with 50 sets of knives. It is definitely a purchase for collectors! Sets are numbered. At MyGoodKnife you can buy 37/50. Set contains 4 knives: 15 cm Petty, 18 cm Santoku, 21 cm Chef´s knife, 23 cm Kiritsuke. Blade material: steel SGP2 (approx. 63 HRC) in a layered damascus unique structure  - raindrops turning into waves. Set is delivered with certificate, microfibre cloth and fine Kiri wood box. Made in Japan. No discounts on this item. 
3 583,87 €

Sold out

Santoku Japanese kitchen knife Mcusta Revolution ZRB-1215G 15cm - 1
Sold out
Santoku Couteau Japonais Mcusta Zanmai Revolution 15cm ZRB-1215G
Mcusta Zanmai Revolution Kosantoku is fantastic small japanese chef's knife with a very thin 3-layer steel blade and SPG2 core, a japanese powder steel known for excellent resistance to wear and corrosion. The 62° Rockwell blade displays hardness, toughness, and flexibility for ultimate sharpness and long lasting edge retention.The beautifully designed handle of black pakka wood lies perfectly in the hand and gives a firm and steady grip. The handle of Mcusta Zanmai Revolution Kosantoku is accented with traditional Japanese decorative pin. Blade length: 15 cm. Full length: 30 cm. Weight: 146 gram. Handcrafted in Seki city, Japan.
169,35 €

Sold out

Gyuto Japanese kitchen knife Mcusta Coreless Aranami ZUA-1005C 21cm - 1
Sold out
Gyuto Couteau Japonais Mcusta Zanmai Coreless Aranami 21cm ZUA-1005C
Mcusta Zanmai  “coreless steel” series Gyuto chef knife with 21 cm blade. VG-10 and VG-2 are laminated together like Damascus steel. Literally there is no core of the steel, that's why this Mcusta kitchen knife series called "coreless". Also the blade patterns are remarkably clearer than on Damascus steel. Mcusta use  “ocean wave” motif which came from a traditional Japanese painting. Handle of Mcusta Zanmai Coreless Aranami Gyuto is made of red pakka wood with a bolster and bottom cap. Mosaic pin on handle and bottom cap. Each knife Mcusta Zanmai Ultimate Coreless Aranami goes in wooden box.
306,45 €

Sold out

Santoku Couteau Japonais Gihei Hamono Aogami 2 Iron clad GH-502 16.5cm
Sold out
Santoku Couteau Japonais Gihei Hamono Aogami 2 Iron clad 16.5cm GH-502
Japanese kitchen knife santoku by Gihei Hamono. Blade is made of Aogami 2 steel with iron clad. Aogami #2 by Hitachi sometimes called Blue Paper #2 since the steel is wrapped in blue paper. It has a very good edge sharpness and excellent edge retention. This Gihei Hamono santoku has a handle of baked magnolia. Never wash any Japanese knife in a dishwasher. This knife has a thin blade and should not be used on hard items such as bones or frozen foods.
120,97 €

Sold out

Gyuto Couteau Japonais Gihei Hamono Aogami 2 GH-404 21cm
Sold out
Gyuto Couteau Japonais Gihei Hamono Aogami 2 21cm GH-404
Japanese chef knife gyuto by Gihei Hamono. Blade 21 cm is made of Aogami 2 steel. Aogami #2 by Hitachi sometimes called Blue Paper #2 since the steel is wrapped in blue paper. It has a very good edge sharpness and excellent edge retention. This Gihei Hamono gyuto knife has a handle of baked magnolia. Never wash any Japanese knife in a dishwasher. This knife has a thin blade and should not be used on hard items such as bones or frozen foods.
209,68 €

Sold out

Santoku Couteau Japonais Gihei Hamono SLD GH-302 16.5cm
Sold out
Santoku Couteau Japonais Gihei Hamono SLD 16.5cm GH-302
Japanese kitchen knife santoku by Gihei Hamono. The Santoku is the Japanese version of the chef's knife. Blade is made of SLD steel.  SLD stainless steel was originally designed by Hitachi for cutting other steels. It holds an edge as long as a carbon steel, but is much easier to care for. The base of the steel is SKD11 with hardness up to 61-63HRC. This Gihei Hamono santoku has a handle of magnolia. Never wash any Japanese knife in a dishwasher. This knife has a thin blade and should not be used on hard items such as bones or frozen foods.
128,23 €

Sold out

Gyuto Couteau Japonais Ryusen Hamono Tanganryu TG-502 21cm
Sold out
Gyuto Couteau Japonais Ryusen Hamono Tanganryu 21cm TG-502
Winner of the 2016 Good Design Award, the Tanganryu series are for both professional chef and home cook, top line of Ryusen Hamono, having feature of hammered patterns.  The mirror polished "Tsuchime" patterns are contrasted with the blasted Damascus patterns. The beautiful combination of whole hammered and layered pattern blade will make you enjoy cooking much more even by looking.  The core of blade is Cobalt VG-10 steel and 32-layered by stainless steel. Therefore the blade is super hard yet hard to get rust and the cutting edge is amazingly fine.
The Rockwell hardness on this knife is around 60-62 HRC, for a durable edge.  The handle is longer than the standard one, and is developed so that you can safely do fine slicing by holding it at the end closest to you, and you can also use it to chop by holding it in the middle.
274,18 €

Sold out