Filtra per
Prezzo
€ €
Produttori
Lunghezza lama, mm
Paese
Acciaio
Maniglia
Collezione
Durezza
Filtro
Gyuto Japanese kitchen knife Miyabi 5000MCD 34373-201-0 20cm - 1
Sold out
Gyuto (coltello da chef) Coltello da cucina giapponese Miyabi 5000MCD 20cm 34373-201-0
Zwilling Miyabi 5000MCD Gyutoh, 20cm. The knives in the MIYABI 5000MCD series combine functionality with good looks in a supremely harmonious way. Since time immemorial, aesthetics have played a key role in Japanese cuisine. The look of a dish and the way it is presented on the plate are just as much a part of the pleasure as its taste and aroma. In the kitchen Japanese chefs are just as demanding where aesthetics are concerned as they over functionality. The MIYABI 5000MCD series of knives provides professionals and ambitious hobby chefs with a set of precision tools that combine perfect functionality and ergonomics with unique design. - Blade core of extremely hard MicroCarbide MC63 powder steel embedded in 100 layers of steel. - CRYODUR® blade, hardened using a specially developed process (including ice-hardening at –196°C) that guarantees extreme hardness. - Symmetrical blade with ultra-sharp Honbazuke honing. - Thin, stable blade with authentic Japanese blade profile: symmetrical cutting edge with 19° angle - Traditional “D” handle of Masur birch for perfect balance, optimum control and tireless cutting. There are only best kitchen knives in MyGoodKnife’s range.
345,97 €

Sold out

Santoku Coltello da cucina giapponese Miyabi 5000MCT MIZU 32917-181-0 18cm
Sold out
Santoku Coltello da cucina giapponese Miyabi 5000MCT MIZU 18cm 32917-181-0
Miyabi MIZU 5000MCT Santoku Japanese chef´s knife with its measuring 18 cm in length is idealy suitable for cutting and chopping  vegetables, herbs and also meat, fish and other products. This series 5000MCT has a core of MC 63, microcarbide powdereel (63 HRC) covered with 2 layers of ice- hardened Cryodur stainless steel. Cutting edge has an angle of 19°. Hammered finish (Tsuchime) which prevents food from sticking to the blade and ergonomic handle of micarta. It's recommended to hand wash only, maintain and sharpen on a whetstone and using glass, ceramic or stone cutting boards should be avoided. Made in Seki, Japan.
225,00 €

Sold out

Santoku Coltello da cucina giapponese Kajibe KJB-001 16.5cm
Sold out
Santoku Coltello da cucina giapponese Kajibe 16.5cm KJB-001
Kajibe santoku knife with blade length 165 mm. Traditional Japanese chestnut handle. Blade of this Kajibe santoku knife is made of Aogami #2 iron clad steel. Kajibe knives are hand-forged by master blacksmith Kunio Ishikawa and his son. This santoku knife is not allowed to wash by dishwasher. Japanese kitchen knives have very hard, but thin blade. It is not allowed to cut by japanese chef knives bones and meat with bones, coconuts and other nuts, other hard products. 
141,13 €

Sold out

Kiritsuke Coltello da cucina giapponese Sukenari Aogami Super S-417 21cm
Sold out
Kiritsuke Coltello da cucina giapponese Sukenari Aogami Super 21cm S-417
Sukenari kiritsuke knife with blade length 210 mm. Traditional Japanese octagonal magnolia handle. Blade of this Sukenari knife is made of 3 Layered S/S Clad Aogami Super. This kiritsuke knife is not allowed to wash by dishwasher. Japanese kitchen knives have very hard, but thin blade. It is not allowed to cut by japanese chef knives bones and meat with bones, coconuts and other nuts, other hard products. 
258,06 €

Sold out

Santoku Coltello da cucina giapponese Sukenari Aogami Super S-410 19cm
Sold out
Santoku Coltello da cucina giapponese Sukenari Aogami Super 19cm S-410
Sukenari santoku knife with blade length 190 mm. Traditional Japanese octagonal magnolia handle. Blade of this Sukenari knife is made of 3 Layered S/S Clad Aogami Super. This santoku knife is not allowed to wash by dishwasher. Japanese kitchen knives have very hard, but thin blade. It is not allowed to cut by japanese chef knives bones and meat with bones, coconuts and other nuts, other hard products. 
254,03 €

Sold out

Gyuto (coltello da chef) Coltello da cucina giapponese Miyabi 5000MCT MIZU 32911-201-0 20cm
Sold out
Gyuto (coltello da chef) Coltello da cucina giapponese Miyabi 5000MCT MIZU 20cm 32911-201-0
Miyabi MIZU 5000MCT Gyutoh Japanese chef´s knife with its measuring 20 cm in length is suitable for cutting and separating fish and meat. Its pointed tip and sturdy enable clean cuts to be made. This series 5000MCT has a core of MC 63, microcarbide powder steel (63 HRC) covered with 2 layers of ice- hardened Cryodur stainless steel. Cutting edge has an angle of 19°. Hammered finish (Tsuchime) which prevents food from sticking to the blade and ergonomic handle of micarta. It's recommended to hand wash only, maintain and sharpen on a whetstone and using glass, ceramic or stone cutting boards should be avoided. Made in Seki, Japan. 
225,00 €

Sold out

Sujihiki Coltello da cucina giapponese Miyabi 5000MCT MIZU 32910-241-0 24cm
Sold out
Sujihiki Coltello da cucina giapponese Miyabi 5000MCT MIZU 24cm 32910-241-0
Miyabi MIZU 5000MCT Sujihiki Japanese knife with its long and narrow 24 cm blade with ergonomic handle is ideal for cutting meat, fish, fruits for thin slices. This series 5000MCT has a core of MC 63, microcarbide powdereel (63 HRC) covered with 2 layers of ice- hardened Cryodur stainless steel. Cutting edge has an angle of 19°. Hammered finish (Tsuchime) which prevents food from sticking to the blade and ergonomic handle of micarta. It's recommended to hand wash only, maintain and sharpen on a whetstone and using glass, ceramic or stone cutting boards should be avoided. Made in Seki, Japan. 
233,06 €

Sold out

Coltello da pane Miyabi 5000MCT MIZU 32916-241-0 23cm
Sold out
Coltello da pane Miyabi 5000MCT MIZU 23cm 32916-241-0
Miyabi MIZU 5000MCT Japanese bread knife 23 cm has a tough serrated edge, so it can easily cut through bread crusts and pastries. The double-edged blade and Honbazuke honing give the knife its sharpness. This series 5000MCT has a core of MC 63, microcarbide powdereel (63 HRC) covered with 2 layers of ice- hardened Cryodur stainless steel. Cutting edge has an angle of 19°. Hammered finish (Tsuchime) which prevents food from sticking to the blade and ergonomic handle of micarta. It's recommended to hand wash only. Using glass, ceramic or stone cutting boards should be avoided. Made in Seki, Japan. 
225,00 €

Sold out

Coltello da cucina giapponese Seki Kanetsugu Pro J Petty 6002 15cm
Sold out
Coltello da cucina giapponese Seki Kanetsugu Pro J Petty 15cm 6002
Petty knife with 15 cm blade from Seki Kanetsugu Pro J series. After yers of research for the ultimate performance kitchen knives in functional materials and design, Mr. Kawamura of Kanetsugu has released the innovative line of Pro J Series.Hammer Forged Tsuchime Blade has cladding blade construction. Blade core is made of special high grade Cobalt steel called ZA-18 from Aichi Steel Company, sandwiched with AUS-2 stainless steel. This is the first kitchen knife to use this new formula steel of ZA-18.Mr. Kawamura explains Aichi Steel Ccompany has recently developed this ZA-18 to compete or even outperform VG-10. It is heat treated and then ice hardened (Sub-Zero quench) to the Rockwell hardness of HRc. 60-61. The Chemical Composition of ZA-18 is similar to the VG-10, but contains higher Carbon (1.20 vs. 1.05), Chromium (18.0 vs. 15.5), Molybdenum (1.50 vs. 1.20) and Cobalt (1.80 vs. 1.5) for added hardness, durability and rust-resistance. In fact, before Mr. Kawamura decides to use this steel for Pro J Series, he has tested it many times and proved it's incredible cutting performance and potential. Japanese technology of the cladding blade construction also has many advantages in the durability and maintenance, because the AUS-2 outer steel protects the core steel, and makes the blade extra strong to bending and breaking for the different hardness steel layers.The handle is made of Black-Pakkawood handle, comes with nice accent of red color micro fiber spacer and stainless steel bolster. It is ergonomically designed with slightly slanted bolster forge welded into the tang and full tang hand rounded handle slab to fit with your hand.
68,55 €

Sold out

Gyuto (coltello da chef) Coltello da cucina giapponese Miyabi 5000MCT MIZU 32911-241-0 24cm
Sold out
Gyuto (coltello da chef) Coltello da cucina giapponese Miyabi 5000MCT MIZU 24cm 32911-241-0
Miyabi MIZU 5000MCT Gyutoh Japanese chef´s knife with its measuring 24 cm in length is suitable for cutting and separating fish, meat and vegetables. Its pointed tip and sturdy enable clean cuts to be made. This series 5000MCT has a core of MC 63, microcarbide powder steel (63 HRC) covered with 2 layers of ice- hardened Cryodur stainless steel. Cutting edge has an angle of 19°. Hammered finish (Tsuchime) which prevents food from sticking to the blade and ergonomic handle of micarta. It's recommended to hand wash only, maintain and sharpen on a whetstone and using glass, ceramic or stone cutting boards should be avoided. Made in Seki, Japan. 
241,13 €

Sold out

Gyuto (coltello da chef) Coltello da cucina giapponese Yoshimi Kato Black Nickel VG-10 D-1906 24cm
Sold out
Gyuto (coltello da chef) Coltello da cucina giapponese Yoshimi Kato Black Nickel VG-10 24cm D-1906
Japanese chef knife gyuto hand forged by Yoshimi Kato who is a certified traditional craftsman in Takefu, Fukui prefecture in Japan. Blade VG-10 Nickel Damascus. Blade length 240 mm. Handle - rosewood. Do not attempt to cut, hit or chop frozen products or bones. The blade can chip or break. Hand wash with warm water and towel dry.
258,06 €

Sold out

Yanagiba Japanese kitchen knife Seki Kanetsugu sushi and sashimi 8022 24cm - 1
Sold out
Yanagiba Coltello da cucina giapponese Seki Kanetsugu Heptagon-Silver sushi and sashimi 24cm 8022
Single Bevel Edge with a slightly concaved flat back, solid High Carbon Molybdenum Vanadium Stainless steel blade is hand sharpened with Japanese whetstone for excellent cutting performance. Mr. Kawamura from Kanetsugu has been researching and challenged for different material, construction and design for extra advantages. The full blade tang is injection molded with dark blue heat-resistant ABS resin bolster/butt-end and silver anodized aluminum grip to prevent water getting into the handle for sanitary and rust resistance. The septangle shaped handle is also very unique and comfortable in your handle. When you look and hold the knife, you will feel a totally different texture and atmosphere.
64,52 €

Sold out

Gyuto Japanese kitchen knife Seki Kanetsugu 9006 23cm - 1
Sold out
Gyuto (coltello da chef) Coltello da cucina giapponese Seki Kanetsugu Saiun 23cm 9006
Famous Cobalt VG-10 Steel core forge-layered with Damascus Stainless steel blade. (Total 33 layers, HRC60 to 61). Beautiful Damascus pattern blade enhanced with elegant wood-grain and round shaped Black Linen Micarta Handle, This is a very durable and shrinkage proof Micarta material imported from Spain.
150,81 €

Sold out

Gyuto (coltello da chef) Coltello da cucina giapponese Yu Kurosaki Fujin VG10 Damascus Keyaki ZVD-180CH 18cm
Sold out
Gyuto (coltello da chef) Coltello da cucina giapponese Yu Kurosaki Fujin VG10 Damascus Keyaki 18cm ZVD-180CH
Yu Kurosaki Chef knife, 18 cm. Yu Kurosaki Fujin series fearture Nickel Damascus-patterned blades with a core of VG-10 stainless steel for professional with a hardness of 60-61 HRC, which provides excellent rust resistance and a long-lasting edge as well as its beautifulness. The blade surface has Damascus and unique hammered FUJIN texture which causes an image of a Japanese god believed to control the wind. The handle of Chef knife Fujin VG10 Damascus Series is made of Octagonal-shaped keyaki wood. Handmade by Mr. Yu Kurosaki. Yu Kurosaki works in Takefu Knife Village where he apprenticed with Hiroshi Kato.
237,90 €

Sold out

Coltello da cucina giapponese Seki Kanetsugu Nami Wine 92011 10cm
Sold out
Coltello da cucina giapponese Seki Kanetsugu Nami Wine 10cm 92011
Seki Kanetsugu Nami Steak knife Wine colour. Steak knife Nami is made of coreless Damascus (laminated material of VG2 and VG10), blending high-tech with swordsmith tradition, the highest quality comfort was born. Seki Kanetsugu uses  “ocean wave” motif which came from a traditional Japanese painting. The founder Kanetsugu began to make the Japanese swards in the 14th century at Mino. Now Seki Kanetsugu incorporates "Hamaguriha" which is the sectional shape of Japanese sword into kitchen knife, making knife that lasts sharpness. Seki Kanetsugu Nami Steak knives are not allowed to wash in dishwasher.
120,16 €

Sold out

Sujihiki Coltello da cucina giapponese Sukenari 3 layers ZDP189 S-116 27cm
Sold out
Sujihiki Coltello da cucina giapponese Sukenari 3 layers ZDP189 27cm S-116
Sukenari sujihiki knife. Blade lenght is 270 mm. Traditional Japanese octagonal magnolia handle. Blade of chef knife Sukenari is made of ZDP-189 steel (3 layers). This Sukenari sujihiki japanese knife is not allowed to wash by dishwasher. Japanese kitchen knives have very hard, but thin blade. It is not allowed to cut by japanese chef knives bones and meat with bones, coconuts and other nuts, other hard products. 
298,39 €

Sold out

Coltello da cucina giapponese Santoku Yoshimi Kato Ginsan D-702CW 17cm
Sold out
Coltello da cucina giapponese Santoku Yoshimi Kato Ginsan 17cm D-702CW
Santoku knife with satin finished ginsan blade made by Yoshimi Kato. Yoshimi Kato uses Ginsan, or Silver-3, steel as the main element of this line of blades. G3 steel is well known for its excellent edge properties. Blade length 170 mm. Handle – cherrywood. For santoku Yoshimi Kato Ginsan recommended hand wash with warm water and towel dry. Avoid bones, frozen foods, nuts and hard candies or anything other than fruits, vegetables and proteins.
197,58 €

Sold out

Petty Coltello da cucina giapponese Makoto Kurosaki Petty STYLK-201 13.5cm
Sold out
Petty Coltello da cucina giapponese Makoto Kurosaki Petty 13.5cm STYLK-201
Japanese petty knife handmade by Makoto Kurosaki. 135 mm SPG2 blade with stainless steel clad. Handle: cherrywood. Handwash in warm water and towel dry. Do not cut frozen foods. Makoto Kurosaki is an exceptionally talented blacksmith working in Takefu Knife Village.
137,10 €

Sold out

Yanagiba Japanese kitchen knife Sakai Takayuki Inox 04304 27cm - 1
Sold out
Yanagiba Coltello da cucina giapponese Sakai Takayuki Inox 27cm 04304
Traditional japanese Sakai Takayuki Yanagiba Sashimi Inox knife with 27 cm single edged blade. Blade is made chrome and molybdenum 8A stainless steel. Sakai Takayuki Inox knives are sharp and do not rust easily due to their special material. The U shaped magnolia handles and water buffalo bolsters are easy to grip and are comfortable in the hand, even through long hours of use. Nothing slices sashimi like a perfectly sharpened Yanagiba. The long sharp blade severs fibres in the flesh without pulling or tearing. This Sakai Takayuki Yanagiba Inox 27 cm 04304 easy to sharpen and recommended for business and home use.
152,42 €

Sold out

Fodero TOJIRO Nakiri Saya 18 cm M-312
Sold out
Fodero TOJIRO Nakiri Saya 18 cm M-312
The M-312 saya will fit all Tojiro nakiri knives with blades up to 180 mm. About models of other manufactures, please, ask our consultants. Tojiro saya/wooden sheaths are made from magnolia wood which is a hard wood and is very light weight. Saya has small wooden pin which you remove to place your knife inside and you can then reattach the pin to make it safe. The saya are also very good if keeping knives in draws at home or in the professional kitchen as they will be protected from other sharp blade which can potentially chip or dull the cutting edge.
28,23 €

Sold out

Fodero TOJIRO Santoku Saya 18 cm M-311
Sold out
Fodero TOJIRO Santoku Saya 18 cm M-311
The M-311 saya will fit all Tojiro Santoku knives with blades up to 180mm. About models of other manufactures, please, ask our consultants. Tojiro saya/wooden sheaths are made from magnolia wood which is a hard wood and is very light weight. Saya has small wooden pin which you remove to place your knife inside and you can then reattach the pin to make it safe. The saya are also very good if keeping knives in draws at home or in the professional kitchen as they will be protected from other sharp blade which can potentially chip or dull the cutting edge.
28,23 €

Sold out

copy of Yanagiba Japanese kitchen knife Tojiro MV F-1057 24cm - 1
Sold out
Yanagiba Coltello da cucina giapponese TOJIRO MV 27cm F-1058
Tojiro MV Resin Collar Yanagi-Sashimi with 270mm blade. Blade made from wear and rust resistant Molybdenum Vanadium steel. So that its maintenance is easier than carbon steel knives and therefore suitable for beginners. However, edge is carefully sharpened without compromise by our craftsman. Handle is made from magnolia and has good water resistance. Weight of Tojiro MV Yanagiba F-1058 knife is 145 g. Like other traditional Japanese knife blades, this knife has a bevel on only one side of the blade, to help achieve even slices.
109,68 €

Sold out

Coltello da cucina giapponese TOJIRO Zen Black Petty FD-1562 13cm
Sold out
Coltello da cucina giapponese TOJIRO Zen Black Petty 13cm FD-1562
Tojiro Zen Black Petty knife with 130 mm blade. VG10 as core steel, clad by 13-chrome stainless steel, it has achieved both professional sharpness and easy maintenance. Black oxide processing, which is the technology often used for medical equipment, has been applied on blade. The blade thus has both outstanding corrosion resistance and beautiful visual aspect. Tojiro Zen Black Petty knife FD-1562 weights 45 g. Chestnut handle has excellent durability, and additionally applied fire treatment on surface makes it even stronger. Tojiro Zen Black petty knife FD-1562 is not allowed to wash by dishwasher. It has very hard, but thin blade and not allowed to cut bones and meat with bones, coconuts and other nuts, other hard products.
66,94 €

Sold out

Sujihiki Japanese kitchen knife Mcusta Forest HBG-6011M 27cm - 1
Sold out
Sujihiki Coltello da cucina giapponese Mcusta Zanmai Forest 27cm HBG-6011M
Japanese slicing knife sujihiki Mcusta Zanmai Forest with 270 mm blade. Mcusta Zanmai Forest Molybdenum Series is a great introduction to high quality Japanese knives. For this series, Zanmai forges each blade using Molybdenum Vanadium 8A steel and sharpens them utilizing Zanmai's famous Hamaguri V-Cut form. This grinding method results in incredibly sharp knives that are easy to use and maintain. The handle’s end caps are mirror finished and provide additional balance. The beautiful green micarta hangles are triple-riveted to complete this professional quality knife at an affordable price. MyGoodKnife is an authorized dealer of Marusho Industry Inc (brand Mcusta Zanmai). All Mcusta knives and scissors at our stores are original and made is Seki city, Japan. Check our video to see interview with Mr.Tomohiro Hasegawa - president of Marusho Industry Inc (brand Mcusta Zanmai). Interview was made when Mr.Tomohiro visited or store in Helsinki.
128,22 €

Sold out