Filtrer
Prix
4 4480
Fabricants
Blade Length, mm
70 355
Country
Steel
Handle
Collection
Hardness
Lock
Filtrer
Bunka Couteau Japonais Daisuke Nishida Funayuki 18cm DN-11225
The Bunka Daisuke Nishida DN-11225 knife is forged by Daisuke Nishida and is one of the greatest, magnificent examples of Japanese knives. Blade 180 mm is made of carbon steel Shirogami No. 1 by forge welding with a black coating. The Daisuke Nishida Bunka has an octagonal walnut handle with a maple ring. The bolster is made of Macassar ebony wood. This knife cannot be washed in the dishwasher. Japanese kitchen knives have a very hard but thin blade. Japanese knives are not allowed to cut bones and meat with bones, coconuts and other nuts, and other hard foods. Daisuke Nishida knives due to handmade may differ slightly from those shown in the photos and sizes. Weight 250 gr.
144,35 €

In stock

Sujihiki Couteau Japonais Ittetsu Aogami 2 S/S Clad 27cm ISN-11
Sujihiki Ittetsu Aogami 2 ISN-11 knife with 27 cm blade. The blade is made of Aogami #2 with stainless steel clad, Nashiji finnish. This is very similar to white paper steel but with tungsten and chromium added to it which helps with edge retention and slows down rusting. The steel has then been hardened to 62-63 Rockwell and wrapped in stainless steel to further ease maintenance. Handle is made of walnut. This knife cannot be washed in the dishwasher. Hand wash with warm water and towel dry. Japanese kitchen knives have a very hard but thin blade. Japanese knives are not allowed to cut bones and meat with bones, coconuts and other nuts, and other hard foods. Ittetsu knives due to handmade may differ slightly from those shown in the photos and sizes. Echizen city, Japan. Weight 440 gr.
201,61 €

In stock

Couteau Japonais Yoshimi Kato Petty Aogami Super S/S clad Cherry 12cm D-900
Japanese petty D-900 handmade by Yoshimi Kato. The compact size and relatively narrow blade make this knife very manoeuvrable and controllable, and also ideal for making precise cuts. Blade is made of Aogami Super steel with stainless steel clad. Blade length 120 mm. Handle – cherrywood. For petty knife made by Yoshimi Kato recommended hand wash with warm water and towel dry. Avoid bones, frozen foods, nuts and hard candies or anything other than fruits, vegetables and proteins.
177,42 €

In stock

Petty Couteau Japonais Mutsumi Hinoura 15cm MHN-1103BR
The petty knife with a blade length of 15 cm is handcrafted by Mutsumi Hinoura. Ideal for cutting vegetables and meat that are too small for a Chef’s knife. Blade of this petty knife is made of Shirogami #2 iron clad steel. The ergonomic handle is made of oak. This  knife is not allowed to wash by dishwasher. Japanese kitchen knives have very hard, but thin blade. It is not allowed to cut by japanese chef knives bones and meat with bones, coconuts and other nuts, other hard products. Weight 155 gr.
165,32 €

In stock

Kiritsuke Couteau Japonais Sukenari Slender Gyuto 24cm S-2111
The Slender Sukenari kiritsuke Gyuto S-2111 knife with a blade length of 240 mm is a work of art with excellent ergonomics. The Japanese kitchen knife Sukenari Slender Kiritsuke gyuto is a hybrid of a chef's knife and a slicer. Blade of kiritsuke knife Sukenari is made of ZDP189 steel with damascus clad. Traditional Japanese octagonal magnolia wood handle with buffalo horn ferrule. This Sukenari kiritsuke japanese knife is not allowed to wash by dishwasher. Japanese kitchen knives have very hard, but thin blade. It is not allowed to cut by japanese chef knives bones and meat with bones, coconuts and other nuts, other hard products. Weight 320 gr.
467,74 €

In stock

Gyuto Couteau Japonais Ittetsu VG-10 Damascus 24cm IWZ-105
Gyuto IWZ-105 from Ittetsu is a Japanese-designed chef's knife with a blade length of 24 cm, designed for chopping and slicing meat, fish, fruits and vegetables. The octagonal handle is made of pakkawood wood. The blade is made of high quality VG10 Damascus steel, hammer finish. This knife cannot be washed in the dishwasher. Hand wash with warm water and towel dry. Japanese kitchen knives have a very hard but thin blade. Japanese knives are not allowed to cut bones and meat with bones, coconuts and other nuts, and other hard foods. Ittetsu knives due to handmade may differ slightly from those shown in the photos and sizes. Echizen city, Japan. Weight 270 gr.
140,32 €

In stock

Gyuto Couteau Japonais Ittetsu Aogami 2 S/S Clad 24cm ISN-15
The perfect Gyuto Ittetsu OEM Aogami 2 S/S Clad ISN-15 knife with a 24 cm blade for any task in the kitchen. Handle is made of walnut. The blade is made of Aogami #2 with stainless steel clad, Nashiji finnish. This is very similar to white paper steel but with tungsten and chromium added to it which helps with edge retention and slows down rusting. The steel has then been hardened to 62-63 Rockwell and wrapped in stainless steel to further ease maintenance.  This knife cannot be washed in the dishwasher. Hand wash with warm water and towel dry. Japanese kitchen knives have a very hard but thin blade. Japanese knives are not allowed to cut bones and meat with bones, coconuts and other nuts, and other hard foods. Ittetsu knives due to handmade may differ slightly from those shown in the photos and sizes. Echizen city, Japan. Weight 450 gr.
197,58 €

In stock

Couteau Japonais Daisuke Nishida Shirogami Bocote 16.5cm DN-11211
The Funayuki DN-11211 knife is forged by Daisuke Nishida and is one of the greatest, magnificent examples of Japanese knives. Funayuki was originally used by fishermen to prepare meals at sea. This is a universal knife, it is equally convenient for them to butcher medium-sized fish, butcher its fillet and cut vegetables. Funayuki combines the look of a deba, a nakiri, and a yanagiba. Blade 165 mm is made of carbon steel Shirogami No. 1 by forge welding with a black coating. The Daisuke Nishida Funayuki has an octagonal walnut handle with a maple ring. The bolster is made of Macassar ebony wood. This knife cannot be washed in the dishwasher. Japanese kitchen knives have a very hard but thin blade. Japanese knives are not allowed to cut bones and meat with bones, coconuts and other nuts, and other hard foods. Daisuke Nishida knives due to handmade may differ slightly from those shown in the photos and sizes. Weight 240 gr.
137,10 €

In stock

Couteau Japonais Goko Hamono Shirogami S/S Clad Honesuki 15cm GHO-0101
Honesuki 15 cm made by Gokoo Hamono. Honesukis are boning knives specifically designed for parting out poultry. Rosenwood handle. Hand-dry your knife: This should be done immediately after washing with a clean dishtowel. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry.
192,74 €

In stock

Gyuto Couteau Japonais Ittetsu Tall Shirogami 21cm IW-11844
Tall gyuto chef knife with a wide 60x210 mm blade. Weight 440 g. This kitchen knife is made from 3 layers of material: iron clad and Shirogami steel. A layer of iron on each side protecting a layer of carbon steel at the core, in a process referred to as Sanmai or forge welding. Iron and carbon steel are both susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Avoid Bones, Frozen foods, nuts and hard candies or anything other than fruits, vegetables and proteins. Handle: waterproof mono octagonal walnut. Ittetsu knives are handmade in Echizen city, Japan. Hand wash with warm water and towel dry.
149,19 €

In stock

Bunka Couteau Japonais Ittetsu Tall Shirogami 21cm IW-11843
Tall bunka knife with a wide 60x210 mm blade. Weight 450 g. This kitchen knife is made from 3 layers of material: iron clad and Shirogami steel. A layer of iron on each side protecting a layer of carbon steel at the core, in a process referred to as Sanmai or forge welding. Iron and carbon steel are both susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Avoid Bones, Frozen foods, nuts and hard candies or anything other than fruits, vegetables and proteins. Handle: waterproof mono octagonal walnut. Ittetsu knives are handmade in Echizen city, Japan. Hand wash with warm water and towel dry.
181,45 €

In stock

Bunka Couteau Japonais Ittetsu Tall Shirogami 18cm IW-11842
Tall bunka knife with a wide 57x180 mm blade. Weight 400 g. This kitchen knife is made from 3 layers of material: iron clad and Shirogami steel. A layer of iron on each side protecting a layer of carbon steel at the core, in a process referred to as Sanmai or forge welding. Iron and carbon steel are both susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Avoid Bones, Frozen foods, nuts and hard candies or anything other than fruits, vegetables and proteins. Handle: waterproof mono octagonal walnut. Ittetsu knives are handmade in Echizen city, Japan. Hand wash with warm water and towel dry.
149,19 €

In stock

Couteau Japonais Ittetsu Usuba Shirogami 2 18cm IJF-15141
 Usuba knife with 180 mm forge-welded blade made of Shirogami #2 carbon steel. Weight is 400 g. Usuba is a traditional Japanese knife for slicing vegetables. Unlike nakiri, usuba is a single-beveled knife. The oval shaped handle is made of magnolia wood. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discoloration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.
157,26 €

In stock

Couteau Japonais Ittetsu Usuba Shirogami 2 16.5cm IJF-15140
 Usuba knife by Ittetsu has 165 mm forge-welded blade made of Shirogami #2 carbon steel. Weight is 310 g. Usuba is a traditional Japanese knife for slicing vegetables. Unlike nakiri, usuba is a single-beveled knife. The oval shaped handle is made of magnolia wood. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discoloration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.
149,19 €

In stock

Yanagiba Couteau Japonais Ittetsu Forge-welded Shirogami 2 21cm IJF-15123
 This sushi knife by Ittetsu has 210 mm forge-welded blade made of Shirogami #2 carbon steel. Weight is 350 g. The oval shaped handle is made of magnolia wood.  Yanagiba knives are primarily used to slice boneless fish fillets for Sashimi and Sushi dishes. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discoloration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.
133,06 €

In stock

Yanagiba Couteau Japonais Ittetsu Forge-welded Shirogami 2 18cm IJF-15122
 This Yanagiba knife by Ittetsu has 180 mm forge-welded blade made of Shirogami #2 carbon steel. Weight is 310 g. The oval shaped handle is made of magnolia wood.  Yanagiba knives are primarily used to slice boneless fish fillets for Sashimi and Sushi dishes. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discoloration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.
125,00 €

In stock

Deba Couteau Japonais Ittetsu Forge-welded Shirogami 2 24cm IJF-15112
Large Deba knife by Ittetsu has 240 mm forge-welded blade made of Shirogami #2 carbon steel.  Weight is 700 g. The oval shaped handle is made of magnolia wood.  Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discoloration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.
282,26 €

In stock

Santoku Couteau Japonais Kunio Masutani VG-1 17cm M-1361
Santoku knife with Nashiji finish. This finish imitates the skin of the Asian pear. Hand forged blade is made of 3 Layer VG-1 steel. The handle is made of mahogany wood. Weight is 155 g. Not allowed to wash in dishwasher.
116,94 €

In stock

Gyuto Couteau Japonais Yoshimi Kato Aogami super 21cm D-505
Japanese chef knife gyuto is hand forged by Yoshimi Kato, who is a certified traditional craftsman in Takefu, Fukui prefecture in Japan. Blade is made from 3 layers with Aogami carbon steel core. Blade length 210 mm. Handle – cherrywood. Hand wash with warm water and towel dry. Avoid bones, frozen foods, nuts and hard candies.
243,03 €

In stock

Sujihiki Couteau Japonais Takeshi Saji Ebony 24cm HA-4811
Sujihiki knife handmade by Mr. Takeshi Saji. Blade - 31 layers nickel damaskus steel, VG10 core. Blade length 24 cm. Handle - ebony with buffalo horn bolster. Weight of chef's knife by Takeshi Saji is 290 g.Takeshi Saji is a Chairman of Saji Balacksmith (Japan). Member of Japan Knife Guild and Japan Custom Knife Makers. In 1992, he was officially certified as Dentoukougeishi, a “Traditional Master Craftsman” by the Japanese “Ministry of International Trade & Industry”.
508,06 €

In stock

Deba Couteau Japonais Ittetsu Forge-welded Shirogami 2 for left-handed 18cm IJF-11108L
 Ittetsu Deba knife IJF-11108L with 180 mm forge-welded blade made of Shirogami #2 carbon steel. The oval shaped handle is made of magnolia wood. The blade is single bevel and this model is made for left-handed. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discoloration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.
161,29 €

In stock

Couteau Japonais Ittetsu Honesuki Aogami 2 15cm ISN-08
Ittetsu Honesuki knife with 15 cm blade. Honesuki is specifically designed for de-boning and breaking down poultry, but is also capable of filleting fish or meat and carrying out many tasks. Blade is made of Aogami 2 steel. This is very similar to white paper steel but with tungsten and chromium added to it which helps with edge retention and slows down rusting. The steel has then been hardened to 62-63 Rockwell and wrapped in stainless steel to further ease maintenance. Handle is antibacterial bubinga. Ittetsu knives are handmade in Echizen city, Japan. Hand wash with warm water and towel dry. 
152,42 €

In stock

Le set de couteaux TOJIRO Gift D DP-GIFTSET-D
The most popular Tojiro DP series 3 knives: F-801 Petty 120mm, F-503 Santoku 170mm, F-808 Chef 210mm in a wooden box. Tojiro DP Gift Set is a wonderful way to bring happiness to any cooking enthusiast. It includes the most important knives in any starting collection. Classic western (Yo) style handle made out of micarta. Stainless VG-10 steel will keep the blades sharp for a long time, and will resist corrosion very well. Comes in gift wooden box.
258,06 €

In stock