Filter by
Price
€ €
Manufacturers
Blade Length, mm
Country
Steel
Handle
Collection
Hardness
Sheath
Lock
Filter
Deba Japanese kitchen knife Hideo Kitaoka 11 Layered Shirogami CN-4203 15cm
Sold out
Deba Kitchen knife Hideo Kitaoka 11 Layered Shirogami 15cm CN-4202
Custom Deba knife 150 mm. Handmade by Mr. Hideo Kitaoka. Shirogami steel, 11 layers. Blade is sharpened on one side. Handle made from Japanese rosewood, which has good water resistance and smooth surface. Deba is traditionally used to clean and fillet whole fish, but it is also commonly used for breaking down and dressing poultry and meats with small bones. Please, use your carbon knives carefully. It is not recommended for such knives - to wash in dishwasher, to leave it in water, to clean by acid liquids, to cut acid fruits like lemon. Hand-dry your knife: This should be done immediately after washing with a clean dishtowel. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry.
€167.33

Sold out

Sujihiki Japanese kitchen knife Yoshimi Kato Aogami Super D-907 27cm
Sold out
Sujihiki Kitchen knife Yoshimi Kato Aogami Super 27cm D-907
Japanese slicing knife sujihiki with black finished Super Aogami blade made by Yoshimi Kato. Blade length 270 mm. Handle – cherrywood. For sujihiki knife Yoshimi Kato Aogami Super recommended hand wash with warm water and towel dry. Avoid bones, frozen foods, nuts and hard candies or anything other than fruits, vegetables and proteins.
€310.76

Sold out

Gyuto Japanese kitchen knife Kenshiro Hatono Kurouchi Aogami KH-103 21cm
Sold out
Gyuto Kitchen knife Kenshiro Hatono Kurouchi Aogami 21cm KH-103
This japanese gyuto knife is handmade by Kenshiro Hatono. Blade 210 mm made of Aogami Super core enveloped by stainless steel. Traditional handle made of japanese walnut tree. Handle of this knife is bigger then usual one. Currently he is working in Takefu knife village. This Japanese handmade knife is not allowed to cut, hit or chop frozen products or bones. The blade can chip or break. Hand wash with warm water and towel dry. 
€214.34

Sold out

Santoku Japanese kitchen knife Naoki Mazaki NM-1309 16.5cm
Sold out
Santoku Kitchen knife Naoki Mazaki 16.5cm NM-1309
Santoku Naoki Mazaki NM-1309 with 16,5cm blade. The blade made of Shirogami #2 steel, with hardness 62-63HRC. Handle made of ash and quince. Handmade in Japan. Masaki-san, a blacksmith from Sanjo, is relatively young, he hails from the island of Hokkaido. A young man with no definite direction in life, he set off on his motorcycle across Japan. When he stayed in Sanjo, he was fascinated by the local blacksmithing and knife business. After about five years of apprenticeship with Yoshikane, he decided that he would prefer a more traditional, practical approach to creating knives.
Masaki-san prefers to use the more traditional Shirogami #2 to make his knives, and he often finishes many of his blades, giving them a rustic look. Shirogami has incredible cutting edge durability and sharpness.
€152.42

Sold out

Gyuto Japanese kitchen knife Yu Kurosaki Fujin VG10 Damascus ZVD-210CHO 21cm
Sold out
Gyuto Kitchen knife Yu Kurosaki Fujin VG10 Damascus 21cm ZVD-210CHO
Yu Kurosaki Chef knife, 21 cm. The handle is made this time of oak. Yu Kurosaki Fujin series fearture Nickel Damascus-patterned blades with a core of VG-10 stainless steel for professional with a hardness of 60-61 HRC, which provides excellent rust resistance and a long-lasting edge as well as its beautifulness. The blade surface has Damascus and unique hammered FUJIN texture which causes an image of a Japanese god believed to control the wind. Handmade by Mr. Yu Kurosaki.
€313.71

Sold out

Nakiri Japanese kitchen knife Yu Kurosaki Fujin VG10 Damascus ZVD-165NARB 16.5cm
Sold out
Nakiri Kitchen knife Yu Kurosaki Fujin VG10 Damascus 16.5cm ZVD-165NARB
Yu Kurosaki Fujin series nakiri with Nickel Damascus-patterned blades with a core of VG-10 stainless steel. Hardness of 60-61 HRC provides excellent rust resistance and a long-lasting edge as well as its beautifulness. The blade surface has Damascus and unique hammered FUJIN texture which causes an image of a Japanese god believed to control the wind. The handle of Nakiri Fujin VG10 Damascus Series is made rosewood. Yu Kurosaki works in Takefu Knife Village where he apprenticed with Hiroshi Kato.
€290.32

Sold out

Kiritsuke Japanese kitchen knife Hideo Kitaoka Shirogami CN-22161 24cm
Sold out
Kiritsuke Kitchen knife Hideo Kitaoka Shirogami 24cm CN-22161
Handmade single-beveled kiritsuke knife by Mr. Hideo Kitaoka. 24 cm blade is made of carbon steel with Shirogami steel core Handle made of a natural pakkawood.  Hideo Kitaoka in Takefu, Fukui Province specializes in the production of high-quality single-edged kitchen knives. Please, use your carbon knives carefully. It is not recommended for such knives - to wash in dishwasher, to leave it in water, to clean by acid liquids, to cut acid fruits like lemon. Hand-dry your knife: This should be done immediately after washing with a clean dishtowel. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry. The knife has rounded tip. 
€177.42

Sold out

Bunka Japanese kitchen knife Yu Kurosaki Shizuku R2 ZR-165BUO 16.5cm
Sold out
Bunka Kitchen knife Yu Kurosaki Shizuku R2 16.5cm ZR-165BUO
Yu Kurosaki Shizuku Bunka knife with 165 mm blade.  This Yu Kurosaki series feartures R2 tsuchime-finish blades. This bunka knife has an incredible level of finish and polish, with Kurosaki's signature "Shizuku" Tsuchime patterns that are both aesthetically pleasing and functional. Octagon handle is made of oak wood. Wash and dry with a soft sponge, and safely store after use. Avoid cutting into bones, frozen foods, hard fruit pits. Recommended cutting surface: wood, rubberized boards and high-end composites, and quality plastics such as polyethene make acceptable cutting surfaces, and will help protect and prolong knife’s edge. Avoid glass, metal, countertops, and other rigid, non-forgiving surfaces. Yu Kurosaki works in Takefu Knife Village.
€297.58

Sold out

Deba Japanese kitchen knife Ittetsu Shirogami 2 IJF-11107 16.5cm
Sold out
Deba Kitchen knife Ittetsu Forge-welded Shirogami 2 16.5cm IJF-11107
The japanese kitchen knife Ittetsu Deba IJF-11107 with 165 mm forge-welded blade made of Shirogami #2 carbon steel. The oval shaped handle is made of magnolia wood. The blade is single bevel. Carbon steel is susceptible to rust and must be kept dry and clean at all time’s to avoid oxidation and discolouration. Hand wash with warm water and towel dry. Ittetsu knives are handmade in Echizen city, Japan.
€104.03

Sold out

Gyuto Japanese kitchen knife Yu Kurosaki Fujin Super Aogami Series ZAF-240CH 24cm
Sold out
Gyuto Kitchen knife Yu Kurosaki Fujin Super Aogami 24cm ZAF-240CH
Gyuto japanese chef knife handmade by Mr. Yu Kurosaki. Super Aogami series 3 layers (Blue) with stainless steel clad, padouk wood handles with turquoise ring. A Gyuto Knife is a Japanese kitchen knife made for all different styles of cutting from meat to vegetables to tiny pieces of garlic. Blade length of Yu Kurosaki Chef knife Fujin Super Aogami Series is 240 mm.
€282.26

Sold out

Gyuto Japanese kitchen knife Seki Kanetsugu Shiun 6502 20cm
Sold out
Gyuto Kitchen knife Seki Kanetsugu Shiun 20cm 6502
The luxurious Gyuto 6502 Shiun Series knife from Seki Kanetsugu can easily handle any task in your kitchen. Offering both sharpness and durability, this elegant knife is sure to become your favorite in no time- The VG-10 core steel is forged between three layers of softer steel. The outer layer ensures that the core steel is well protected against possible damage and oxidation. The outer layer is also equipped with a beautiful hammer blow (Tsuchime) pattern so that products stick to the blade less quickly. Beautiful handle is made from oak. Gyuto means an all-purpose knife, including meat, fish, and vegetables.  Japanese Seki Kanetsugu knives are supplied in branded boxes.
€125.00

Sold out

Santoku Japanese kitchen knife Seki Kanetsugu Shiun 6312 17cm
Sold out
Santoku Kitchen knife Seki Kanetsugu Shiun 17cm 6312
The impressive and luxurious Santoku 6312 Shiun Series knife from Seki Kanetsugu can easily handle any task in your kitchen. Santoku means an all-purpose knife, including meat, fish, and vegetables. Offering both sharpness and durability, this elegant knife is sure to become your favorite in no time- The VG-10 core steel is forged between three layers of softer steel. The outer layer ensures that the core steel is well protected against possible damage and oxidation. The outer layer is also equipped with a beautiful hammer blow (Tsuchime) pattern so that products stick to the blade less quickly. Beautiful oak handle coated with Japanese natural lacquer with a patterned finish in gold leaf (copper). Japanese Seki Kanetsugu knives are supplied in branded boxes.
€127.42

Sold out

Petty Japanese kitchen knife Seki Kanetsugu Zuiun Kiwami 9502 15cm
Sold out
Petty Kitchen knife Seki Kanetsugu Zuiun Kiwami 15cm 9502
The Petty 9502 Zuiun Kiwami series of knives from Seki Kanetsugu will charm you with the highest quality of workmanship and materials used. The Petty is a small utility knife used for peeling, shaping and slicing fruits and vegetables, chopping herbs and preparing side dishes. The Zuiun is a special model manufactured to celebrate the company's centennial. Seki Kanetsugu Zuiun knives have blades with a wavy “hamon” pattern similar to Japanese swords. In its current incarnation, Seki Kanetsugu Cutlery has been making modern blades that realize the characteristics of Japanese swords--unbreakable, unbending and very sharp. The company also infused the Zuiun with the spirit of such swords. The blade is made using the San Mai technique, where the core is made of high-speed powder steel SPG2 (Super Powder Gold 2) and covered with 62-layer damascus. DLC (Diamond Like Carbon) blade coating is a thin layer that is applied to the surface to improve the properties of the knife. Surface treatment increases resistance to wear and abrasion. Finely sharpened by artisans, the surface of the blade features a scudding cloud-like pattern. It is also forged into a V-shaped "hamaguri-ba" blade, reflecting a characteristic of Japanese swords.The beautiful, very durable and easy-to-clean handle is made of laminate, has an octagonal shape and fits perfectly in the hand. All Seki Kanetsugu Zuiun Kiwami knives are made by hand. Delivered in wooden gift boxes. Weight 72 g.
€192.74

Sold out

Santoku Japanese kitchen knife Seki Kanetsugu Zuiun Kiwami 9503 18cm
Sold out
Santoku Kitchen knife Seki Kanetsugu Zuiun Kiwami 18cm 9503
The Santoku Seki Kanetsugu Zuiun Kiwami has an impressive design and is made of the highest quality materials. The Zuiun is a special model manufactured to celebrate the company's centennial. Seki Kanetsugu Zuiun knives have blades with a wavy “hamon” pattern similar to Japanese swords. In its current incarnation, Seki Kanetsugu Cutlery has been making modern blades that realize the characteristics of Japanese swords--unbreakable, unbending and very sharp. The company also infused the Zuiun with the spirit of such swords. The blade is made using the San Mai technique, where the core is made of high-speed powder steel SPG2 (Super Powder Gold 2) and covered with 62-layer damascus. DLC (Diamond Like Carbon) blade coating is a thin layer that is applied to the surface to improve the properties of the knife. Surface treatment increases resistance to wear and abrasion. Finely sharpened by artisans, the surface of the blade features a scudding cloud-like pattern. It is also forged into a V-shaped "hamaguri-ba" blade, reflecting a characteristic of Japanese swords. The beautiful, very durable and easy-to-clean handle is made of laminate, has an octagonal shape and fits perfectly in the hand. All Seki Kanetsugu Zuiun Kiwami knives are made by hand. Delivered in wooden gift boxes. 
€282.26

Sold out

Paring Vegetable knife Seki Kanetsugu Miyabi Isshin 2000 9cm
Sold out
Paring Kitchen knife Seki Kanetsugu Miyabi Isshin 9cm 2000
An impressive paring knife 2000 with 9 cm blade from Seki Kanetsugu Miyabi Isshin series. The beautiful and very durable handle is made of rosewood and fits perfectly in the hand. This is a tool that can be very useful for preparing almost any dish. AUS-8 as a steel core clad with three-layer SUS410 stainless steel provides professional sharpness and easy maintenance. Japanese Seki Kanetsugu Miyabi Isshin knives are supplied in branded boxes.
€28.23

Sold out

Nakiri Japanese kitchen knife Shiro Kamo SG2 G-7504WEM 16.5cm
Sold out
Nakiri Kitchen knife Shiro Kamo SG2 16.5cm G-7504WEM
Japanese nakiri knife handmade by master Shiro Kamo. Blade length is 165 mm. Blade has a SG2 steel core with a damascus clad. The SG2 powdered steel is high carbon content and a high alloy stainless steel. This japanese knife is not allowed to wash by dishwasher. Knife by mr. Shiro Kamo has very hard, but thin blade. It is not allowed to cut by japanese chef knives bones and meat with bones, coconuts and other nuts, other hard products. The smith Shiro Kamo crafts his blades in the Takefu Knife Village. Shiro Kamo, born in 1958, was honored for his skill with the famous Japanese title "Dento-Kogei-shi" at age 45 (Master of Traditional Craft). Currently, he is President of the Takefu Knife Village Association.
€217.74

Sold out

Bunka Japanese kitchen knife Matsubara Hamono Shirogami Iron clad Walnut KT-003 17cm
Sold out
Bunka Kitchen knife Matsubara Hamono Shirogami Iron clad Walnut 17cm KT-003
Bunka knife with 17 cm blade. This knife is made from 3 layers of steel using a technique called Sanmai (Forge welding). It involves laminating a piece of carbon steel with iron clad. Walnut wooden handle. Hand-dry your knife. This should be done immediately after washing with a clean dishtowel. Rub with mineral oil. If you notice any rust spots, rub a light layer of mineral oil and let dry. Knives under the Matsubara Hamono name are made by master blacksmith Katsuto Tanaka-san who started making knives when he was 20 years old back in 1982. The knife making history of the Matsubara region can be traced back to the year 1474 when Master Yukiyasu Naminohira moved here to make swords in the Hachiman Shrine. Using Matsubara Hamono knife avoid Bones, Frozen foods, nuts and hard candies or anything other than fruits, vegetables and soft products.
€153.23

Sold out

Gyuto Japanese kitchen knife Yu Kurosaki Fujin R2 ZRF-240CHOWNQ 24cm
Sold out
Gyuto Kitchen knife Yu Kurosaki Fujin VG10 Damascus Fujin R2 24cm ZRF-240CHOWNQ
Fujin R2 Gyuto is a long, functionally and aesthetically gorgeous gyuto kitchen knife handcrafted by the Japanese craftsman Yu Kurosaki. When making this series, Kurosaki was inspired by Fujin, the Shinto god of the wind, what can be seen in the hammered texture. The 24 cm long blade with a unique Tsuchime hammered pattern is made of three-layer R2 steel. The octagon handle is made of oak wood with turquoise ring.
€345.97

Sold out

Japanese kitchen knife Nakiri Yoshimi Kato Black Nickel VG-10 165 mm D-1903 16.5cm
Sold out
Nakiri Kitchen knife Yoshimi Kato Black Nickel VG-10 165 mm 16.5cm D-1903
Japanese nakiri knife. Hand forged by Yoshimi Kato who is a certified traditional craftsman in Takefu, Fukui prefecture in Japan. Blade Black Nickel VG-10. Blade length 165 mm. Handle – rosenwood. Nakiri is a vegetable knife. Do not attempt to cut, hit or chop frozen products or bones. The blade can chip or break. Hand wash with warm water and towel dry.
€222.31

Sold out

Japanese kitchen knife Gyuto Ittetsu Aogami 2
Sold out
Gyuto Kitchen knife Ittetsu Aogami 2 S/S Clad 18cm ISW-16
The perfect Gyuto  Aogami 2 S/S Clad ISW-16 from Ittetsu knife with a 18 cm blade for any task in the kitchen. Octagonal handle is made of walnut. The bolster is made of Macassar ebony. The blade is made of Aogami #2 with stainless steel clad, Nashiji finnish. This is very similar to white paper steel but with tungsten and chromium added to it which helps with edge retention and slows down rusting. The steel has then been hardened to 62-63 Rockwell and wrapped in stainless steel to further ease maintenance.  This knife cannot be washed in the dishwasher. Hand wash with warm water and towel dry. Japanese kitchen knives have a very hard but thin blade. Japanese knives are not allowed to cut bones and meat with bones, coconuts and other nuts, and other hard foods. Ittetsu knives due to handmade may differ slightly from those shown in the photos and sizes. Echizen city, Japan. Weight 345 gr.
€149.19

Sold out

Japanese kitchen knife Nakiri Matsubara Hamono Aogami 2 Bocote KT-208 16.5cm
Sold out
Nakiri Kitchen knife Matsubara Hamono Aogami 2 Bocote 16.5cm KT-208
Nakiri knife Matsubara Hamono made by master Katsuto Tanaka.  This knife is made  of Aogami 2 steel with stainless steel clad. Handle is made of walnut wood. Macassar ebony + Hard maple ring. Knives under the Matsubara Hamono name are made by master blacksmith Katsuto Tanaka-san who started making knives when he was 20 years old back in 1982. The knife making history of the Matsubara region can be traced back to the year 1474 when Master Yukiyasu Naminohira moved here to make swords in the Hachiman Shrine. Using Matsubara Hamono knife avoid Bones, Frozen foods, nuts and hard candies or anything other than fruits, vegetables and proteins.
€161.29

Sold out

Steak knife Andre Verdier Laguiole Set of 6 Black VER706NBBP
Sold out
Kitchen knife Andre Verdier Laguiole Set of 6 White 11.4cm VER706NBBP
The Laguiole table knife set by Andre Verdier is made in France. Each knife is 9" (22.86cm) overall. 4.5" (11.43cm) satin finish serrated stainless blade. Black ABS handle. Storage block included.
€62.10

Sold out

Kitchen knife Condor Tool & Knife Butcher 50047 17.8cm
Sold out
Kitchen knife Condor Tool & Knife Butcher 17.8cm 50047
Condor Tool & Knife Butcher fixed is a simple but effective full-tang kitchen tool that holds up under pressure. The 7" bead blasted blade is made 1075 high carbon steel and is great for processing and slicing meat. The durable handle is made from walnut wood and the bottom of the knife features a lanyard loop. No sheath. Weight 5.3. oz
€32.50

Sold out

Fixed blade Knife Old Hickory Hop Field OH5060 17.7cm
Sold out
Fixed blade Knife Old Hickory Hop Field 17.7cm OH5060
Old Hickory Hop Field knife with 177 mm blade. Superb American hand craftsmanship, the finest high carbon steel and genuine hickory wood are the ingredients for the OLD HICKORY line of knives. Made in USA. 
€17.74

Sold out